RESEARCH ON THE THEORETICAL CUTTING FORCE OF THE AXIAL TURN-MILLING

Abstract

Abstract: The model calculating the instantaneous cutting force is founded through the instantaneous cutting area. And the changing process of the instantaneous cutting force is simulated. It is shown that the axial turn-milling is the process of variable cutting force under multi-parameters, the instantaneous cutting force of the edge is variable in a cutting process, and the circle edge is the main edge, its cutting force is more greater than the end edge’s. The instantaneous cutting force of the edge brings two breaks in one integrated cutting process.

Key words: Cutting force, Axial turn-milling, Cutting area

CLC Number:

TH161

Jiang Zenghui;Jia Chunde. RESEARCH ON THE THEORETICAL CUTTING FORCE OF THE AXIAL TURN-MILLING[J]. , 2005, 41(9): 86-90.

[1]	FENG Yong, ZHOU Haojie, ZHOU Zhiyuan, JIA Xiaolin, QIN Yuyan, XU Weiwei. Research on Cutting Force Model of Low-frequency Torsional Vibration Assisted Helical Milling [J]. Journal of Mechanical Engineering, 2024, 60(5): 390-402.
[2]	HE Chunlei, WANG Shuqi, LI Dongyang, GENG Kun, CHEN Guang, REN Chengzu. Research Progress on the Influence of Crystalline Grain in Ultra-precision Cutting of Polycrystalline Material [J]. Journal of Mechanical Engineering, 2024, 60(3): 373-392.
[3]	DU Yuchao, LIANG Zhiqiang, WANG Fei, LI Juan, LIU Yuehong, ZHAO Xu, SU Zhipeng, MA Yue, CHEN Rui, WANG Xibin. Research on Cutting Force Modeling and Cutting Performance of PCD Micro Milling-grinding Combined Machining Tool [J]. Journal of Mechanical Engineering, 2024, 60(19): 298-309.
[4]	HUANG Jingshan, LIU Guoliang, SUN Hao, YAO Bin, JIN Lin, CHEN Binqiang, CAO Xincheng, WANG Shancheng, XU Hao, CAI Zhiqin. Effect of C60 Nanoparticle Cutting Fluid on Cutting Characteristics of 15Cr14Co12Mo5Ni2WA Gear Steel [J]. Journal of Mechanical Engineering, 2023, 59(23): 358-371.
[5]	ZHANG Yang, WU Baohai, XIA Weihong, ZHANG Ying, ZHAO Jing. Multi-objective Feed Optimization with Constant Cutting Force Constraints under Variable Cutting Depth [J]. Journal of Mechanical Engineering, 2021, 57(5): 242-250.
[6]	CHEN Yun, HOU Liang, LIU Wenzhi, BU Xiangjian. Chatter Stability Prediction in Low Immersion Milling Based on Time-domain Simulation [J]. Journal of Mechanical Engineering, 2021, 57(3): 98-106.
[7]	LIU Qiang, ZHANG Haijun, LIU Xianli, GAO Dayong, ZHANG Mingjian. A Review of Research on Intelligent Cutting Tools [J]. Journal of Mechanical Engineering, 2021, 57(21): 248-268.
[8]	FENG Yong, WANG Xiaoyu, XU Zhenqin, JI Fuhua, WANG Haoxiang. Research on Cutting Force Model of Diamond Wire Saw with Single Crystal Silicon Swing [J]. Journal of Mechanical Engineering, 2021, 57(19): 260-272.
[9]	NI Chenbing, ZHU Lida, NING Jinsheng, YANG Zhichao, LIU Changfu. Research on the Characteristics of Cutting Force Signal and Chip in Ultrasonic Vibration-assisted Milling of Titanium Alloys [J]. Journal of Mechanical Engineering, 2019, 55(7): 207-216.
[10]	ZHAO You, GE Xiaohui, ZHAO Yulong. Research on High Precision Dynamic Cutting Force Self-perception Intelligent Tool [J]. Journal of Mechanical Engineering, 2019, 55(21): 178-185.
[11]	WANG Fuji, YIN Junwei, JIA Zhenyuan, MA Jianwei, XU Zhenyu, WANG Dong. Measurement and Analysis of Cutting Force, Temperature and Cutting-induced Top-layer Damage in Edge Trimming of CFRPs [J]. Journal of Mechanical Engineering, 2018, 54(3): 186-195.
[12]	SUN Jiansong, DONG Zhigang, WANG Yidan, LIU Jinting, QIN Yan, KANG Renke. Experimental Study on Ultrasonic Cutting of Aluminum Honeycombs [J]. Journal of Mechanical Engineering, 2017, 53(19): 128-135.
[13]	WANG Yidan, WANG Xuanping, KANG Renke, SUN Jiansong, JIA Zhenyuan, DONG Zhigang. Analysis of Influence on Ultrasonic-assisted Cutting Force of Nomex Honeycomb Core Material with Straight Knife [J]. Journal of Mechanical Engineering, 2017, 53(19): 73-82.
[14]	YUE Caixu, GAO Haining, LIU Xianli. Research on the Stability of the Machining Process Based on the Dynamic Cutting Force Coefficient [J]. Journal of Mechanical Engineering, 2017, 53(17): 193-201.
[15]	MAO Cong, LU Ji, LIANG Chang, ZHANG Mingjun, HU Yongle. Cutting Performance of Single cBN-WC-10Co Fiber [J]. Journal of Mechanical Engineering, 2017, 53(15): 188-200.

RESEARCH ON THE THEORETICAL CUTTING FORCE OF THE AXIAL TURN-MILLING

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments