STUDY ON THE EXPERIMENTS OF LASER QUENCHED + SHOCKED PROCESSING 45 STEEL

Abstract

Abstract: It is studied that the hardened zones of 45 steel are processed through laser shock again, after laser quenched. The results indicate that properties of the zone treated through compound method is improved, compared to that through only laser quenched . The hardness increases by 15% and the wearability enhances 100%. Especially, the residual stress of the interior of the material is changed into com-pressive stress.

Key words: Residual stress, Hardness, Laser quenched, Laser shocked, Wear-resistance

CLC Number:

TN249

Hua Yinqun;Yang Jichang;Yang Xinhua;Cai Lan;Zhang Yongkang. STUDY ON THE EXPERIMENTS OF LASER QUENCHED + SHOCKED PROCESSING 45 STEEL[J]. , 2004, 40(2): 42-44.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2004/V40/I2/42

[1]	YUAN Yuan, Liu Xiucheng, QI Pan, Cao Wenbo, Wang Zhenghong, WU Bin, Gao Xiang. A Non-Destructive Surface Hardness Testing Method Utilizing the Transduction Curve of a Magnetostrictive SH₀ Guided Wave Sensor [J]. Journal of Mechanical Engineering, 2026, 62(6): 228-236.
[2]	ZHENG Wenjian, HU Minghui, YU Yang, FENG Daochen, YAN Dejun, YANG Jianguo. Study on the Influence of Softening Behavior of High Magnesium Aluminum Alloy Welded Joint on Welding Residual Stress [J]. Journal of Mechanical Engineering, 2026, 62(4): 180-189.
[3]	HU Xuzhao, ZHANG Dianbao, XU Zhenlin, CHEN Xianglin, FANG Fang, XIA Ailin. Effect of Annealing on the Magnetic and Mechanical Properties of AlCoCrCuFeNi High-entropy Alloy Prepared by the Laser Powder Bed Fusion [J]. Journal of Mechanical Engineering, 2026, 62(3): 235-247.
[4]	LI Yumei, CHEN Jian, LI Yaguan, CHEN Yunzhi, NIE Zhenguo. 3D Global Residual Stress Field Prediction of Direct Energy Deposition Workpiece Based on Graph Neural Networks [J]. Journal of Mechanical Engineering, 2026, 62(1): 421-435.
[5]	FU Ling, YI Bin, YIN Li, XUE Dingqi, REN Huili, WANG Jiangchao. Effect of Size and Number of Induction Heating during Welding Process on Buckling Distortion Induced by Welding [J]. Journal of Mechanical Engineering, 2025, 61(6): 112-120.
[6]	SONG Hechuan, ZHOU Xiaomin, ZHANG Qingdong, XIONG Qingxia, ZHANG Boyang. Control Law and Mechanism of Residual Stress in Ferromagnetic Material with Magnetic Treatment [J]. Journal of Mechanical Engineering, 2025, 61(6): 174-183.
[7]	WANG Hanming, DONG Qingbing, CHEN Zhuang, ZHAO Bo, SHI Xiujiang. Life Prediction of Planetary Gearbox Based on Competing Failure Mechanisms and Experimental Study [J]. Journal of Mechanical Engineering, 2025, 61(3): 284-298.
[8]	YAN Wuzhu, WANG Yaowei, LI Zhen, CHEN Xifeng, WANG Xing, ZHANG Zhiyuan. New Method of Determining the Optimal Interference Level in Cold Expansion of Holes Based on Mandrel Extrusion Force [J]. Journal of Mechanical Engineering, 2025, 61(24): 129-138.
[9]	QIN Guohua, WANG Jiguo, LIN Feng, WU Zhuxi. Prediction and Control Method for Deformation of Aeronautical Monolithic Components in Multi Process Processing [J]. Journal of Mechanical Engineering, 2025, 61(23): 361-372.
[10]	LU Shulin, WANG Jianfeng, ZHAN Xiaohong, DUAN Yuhang, CHENG Lihong, HUANG Shuwen, ZHAO Yaobang. Effect of Pre-deformation and Heat Treatment Process on Stress Distribution in Spinning of 2219 Aluminum Alloy Thin-walled Components [J]. Journal of Mechanical Engineering, 2025, 61(22): 57-68.
[11]	LI Guannan, MAO Zhixu, WANG Chongyang, HU Long, DENG Dean. Influence of External Constraint on Welding Residual Stress of NM450TP Steel T-joint [J]. Journal of Mechanical Engineering, 2025, 61(20): 91-102.
[12]	YANG Bing, Lü Peijin, HUANG Mian, XU Yanhui, XIAO Shoune, YANG Guangwu, ZHU Tao. Simulation of Surface Residual Stress in Railway Axles and Its Influence on Crack Propagation Behavior [J]. Journal of Mechanical Engineering, 2025, 61(18): 230-239.
[13]	SHANG Yong, JIA Xibei, SUN Jingdong, JIANG Haifeng, LI Guang, SUN Chaoyang. Tempering Hardness Prediction Model of New TBM Disc Cutter Material 7Cr5Mo2MnVSi Steel [J]. Journal of Mechanical Engineering, 2025, 61(12): 83-92.
[14]	HE Shiwei, ZHU Lina, ZHANG Zhiqiang, Kang Jiajie. Study on the Microstructure and Properties of Laser-arc Hybrid Additive Manufacturing of Aluminum Alloys [J]. Journal of Mechanical Engineering, 2025, 61(10): 152-163.
[15]	CHEN Zhaojie, XIE Jin, LIU Junhan, XIONG Changxin, LI Difan. Study on Impulse-discharge Driven Abrasive Flow Assisted Grinding of Monocrystalline SiC [J]. Journal of Mechanical Engineering, 2024, 60(9): 383-392.

STUDY ON THE EXPERIMENTS OF LASER QUENCHED + SHOCKED PROCESSING 45 STEEL

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments