STRENGTH STUDY AND NUMERICAL SIMULATION FOR THE CENTRAL PARTITION IN SPIRAL HEAT EXCHANGER

›› 2004, Vol. 40 ›› Issue (10): 195-198.

• Article • Previous Articles

STRENGTH STUDY AND NUMERICAL SIMULATION FOR THE CENTRAL PARTITION IN SPIRAL HEAT EXCHANGER

Lin Qingyu;Lin Rongduan;Shi Weijun;Sun Tingchen

School of Mechanical Engineering,East China University of Science & Technology School of Chemical Engineering,Guangxi University Beijing Sijiqing Heat Exchanger Plant

Published:2004-10-15

Abstract

Abstract: The theoretical and experimental studies on the strength of the central partition in spiral heat exchanger are carried on. The formulas of the bending stress, the shearing stress and the maximum stress of the central partition are obtained. The experimental stress is consistent with the theoretical stress and the numerical simulation. The formula of the central partition thickness is derived, which has been adopted by the standard of spiral heat exchanger.

Key words: Central partition, Spiral heat exchanger, Strength

CLC Number:

TQ051.5 TQ050.3

Lin Qingyu;Lin Rongduan;Shi Weijun;Sun Tingchen. STRENGTH STUDY AND NUMERICAL SIMULATION FOR THE CENTRAL PARTITION IN SPIRAL HEAT EXCHANGER[J]. , 2004, 40(10): 195-198.

[1]	DONG Zhigang, WANG Zhongwang, RAN Yichuan, BAO Yan, KANG Renke. Advances in Ultrasonic Vibration-assisted Milling of Carbon Fiber Reinforced Ceramic Matrix Composites [J]. Journal of Mechanical Engineering, 2024, 60(9): 26-56.
[2]	WANG Pai, BAI Yifan, ZHAO Wenxiang, ZHANG Yibo, LIU Zhibing. Research on Surface Integrity Evolution of Short Arc Assisted Milling of Superalloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 434-444.
[3]	YANG Yang, WANG Zekui, CHEN Chen, MA Hua, YANG Zhinan, ZHANG Fucheng. Effect of Ni and Cu Alloying on Microstructure and Mechanical Properties of Fe-Mn-Al-C Austenitic Lightweight Steel [J]. Journal of Mechanical Engineering, 2024, 60(8): 154-164.
[4]	LI Li, WANG Yixuan, LUO Fen, ZHANG Wentao, ZHAO Wei, LI Xiaoqiang. Effect of Brazing Time on TiAl Joint Brazed with TiH₂-65Ni+TiB₂ Filler [J]. Journal of Mechanical Engineering, 2024, 60(8): 176-185.
[5]	ZOU Xiaolong, YANG Guangxue, ZHANG Bo, LI Guoshun, ZHANG Yichao, CHEN Can, ZHANG Shujun. Study on Dynamic Stress Characteristics of Bogie Frame of High-speed EMU [J]. Journal of Mechanical Engineering, 2024, 60(8): 212-223.
[6]	HAN Jing, ZHANG Zheng, SONG Yuanming, SUN Qisheng, LIU Zhiyuan, SUN Jiapeng, CAO Chao, ZHAO Jiyun. Preparation, Microstructure and Properties of High-performance Gradient Nanostructured Pure Ti Plate by USSR [J]. Journal of Mechanical Engineering, 2024, 60(6): 227-235.
[7]	REN Zhongkai, LI He, XU Yanan, CHENG Qian, FENG Hao, WANG Tao. Constitutive Model and Microstructural Evolution for Tensile Behavior of Carbon Steel Ultrathin Strip under Pulsed Electric Field [J]. Journal of Mechanical Engineering, 2024, 60(6): 245-260.
[8]	WANG Boshi, CHEN Nannan, CAI Yan, WANG Min. Low-temperature Fatigue Ductile-to-brittle Transition Behavior and Mechanism for Simulated Coarse-grained Heat-affected Zone of a High-strength Low-alloy Bainite Steel [J]. Journal of Mechanical Engineering, 2024, 60(6): 271-278.
[9]	CUI Guihan, YANG Chunli. Strengthening and Toughening Mechanism of Weld Metals on GMAW-P of High Strength and High Toughness Welding Wire [J]. Journal of Mechanical Engineering, 2024, 60(4): 326-334.
[10]	LI Ying, ZHANG Jiafang, ZHANG Zhaoyong, WANG Xincheng, ZHANG Jin, KONG Xiangdong. Design of Minimum Diameter of Piston Neck in Swashplate Axial Piston Pump [J]. Journal of Mechanical Engineering, 2024, 60(4): 430-437.
[11]	CHU Qiang, YANG Xiawei, LI Wenya, FAN Wenlong, ZOU Yangfan, HAO Sijie. Microstructure Evolution and Strengthening Mechanism of the Probeless Friction Stir Spot Welding of a Al-Li Alloy [J]. Journal of Mechanical Engineering, 2024, 60(2): 150-158.
[12]	ZHANG Huijie, KONG Xuliang, YAO Enze, MA Kang, SONG Jianling. Affecting Mechanism of Base Metal’s Relative Position on Microstructure and Property of Dissimilar Friction Stir Welded Joint of High-strength Aerospace Aluminum Alloys [J]. Journal of Mechanical Engineering, 2024, 60(18): 154-162.
[13]	ZHANG Chi, LIU Fuchu, MU Yingpeng, WU Dingyi, WU Ming, LIN Yuxiao, HAN Guangchao, FAN Zitian. Study on the Correlation between Porosity and Flexural Strength of Porous Alumina Ceramic Based on Direct Ink Writing Forming Method [J]. Journal of Mechanical Engineering, 2024, 60(17): 330-338.
[14]	TANG Pei, ZHANG Yong, JIA Yunfei, LI Xiao, WANG Yongji. Study on Low-cycle Fatigue Performance of Pure Titanium with Bimodal Structure: Experiment and Simulation [J]. Journal of Mechanical Engineering, 2024, 60(12): 228-239.
[15]	LIU Chengshang, CHEN Rui, LI Fang, WANG Meng, XU Wujiao. Parameters Determination of Hardening Model for Ultra-high Strength Steel Based on Modified Genetic Algorithm and Bending Spring Back Prediction [J]. Journal of Mechanical Engineering, 2024, 60(12): 240-249.

STRENGTH STUDY AND NUMERICAL SIMULATION FOR THE CENTRAL PARTITION IN SPIRAL HEAT EXCHANGER

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments