STUDY ON THE APPLICATION OF RADIO-FREQUENCY SIGNAL IN FLAW CLASSIFICATION OF ULTRASONIC TESTING

Abstract

Abstract: The analysis of ultrasonic signals obtained during weld inspection is dealt with，aiming to distinguish different flaws with signal analysis and classification methods. The features of radio-frequency signal and demodulated signal are described，and an evaluation method of distance and identification index is given，which is used to compare the possibility of being classified. The flaw signal classification is presented on the combination of wavelet analysis and neural network. Results obtain demonstrate the effectiveness of RBFN than BPN in learning speed and generalization.

Key words: Distance between-and-within classes, Flaw classification, Radio-frequency signal, Ultrasonic inspection, Design, Dynamic characteristics, Planetary transmission system, GTF aero-engine

CLC Number:

TG441.7

Liu Xu;Xia Jindong;Gong Yue;Wu Miao;Sun Zhi. STUDY ON THE APPLICATION OF RADIO-FREQUENCY SIGNAL IN FLAW CLASSIFICATION OF ULTRASONIC TESTING[J]. , 2002, 38(4): 84-87.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2002/V38/I4/84

[1]	ZHANG Xinjie, WANG Luhang, GUO Konghui, LIU Yang, JIN Gengrui, YAO Quan. System-level Co-design Optimization for Active Camber and Toe Suspension Systems [J]. Journal of Mechanical Engineering, 2026, 62(8): 21-32.
[2]	HE Zhicheng, HE Jinglin, JIANG Chao, GAO Hui, XU Wenlin, LIU Yue. Optimal Design Methodology of Automobiles Suspension Topological Configuration with Multi-joints Parsing [J]. Journal of Mechanical Engineering, 2026, 62(8): 33-48.
[3]	LUO Shijian, GUO Herui, LI Qingling, YI Peiqi. Trust Issues in Design for Human-AI Collaboration: Challenges, Progress and Prospects [J]. Journal of Mechanical Engineering, 2026, 62(7): 324-342.
[4]	KE Qingdi, ZHANG Zhen, XUE Bing, LI Zisheng. Dynamic Knowledge Push Method of Green Design Based on Personnel Characteristics [J]. Journal of Mechanical Engineering, 2026, 62(7): 343-362.
[5]	ZHANG Heng, HU Tiannan, DING Xiaohong, LUO Yunfeng, LI Haidong, NI Weiyu. Topology Optimization for Designing Shell-multi-material Infill Structures [J]. Journal of Mechanical Engineering, 2026, 62(7): 375-384.
[6]	LI Dongjie, LIANG Yu, YAO Gang, GAO Weida, RONG Weibin, YANG Liu, ZHANG Yu. Design of Microcavity Capsule Structures for Glioma Radiochemotherapy and Study on Dose Distribution and Dynamic Response [J]. Journal of Mechanical Engineering, 2026, 62(7): 405-417.
[7]	QIN Tong, MENG Qingyao, WEI Wei, CHEN Liwei, WANG Ziyang, LI Li. Research on Data-driven General Loop Design of Launch Vehicles [J]. Journal of Mechanical Engineering, 2026, 62(7): 15-24.
[8]	HUANG Yu, WANG Ru, WANG Guoxin, LI Yingjie, LI Haokun, WANG Lanbing, ZHANG Wenfeng, YAN Yan. Research on an Intelligent Decision Support Methodology for Complex Equipment System Architecture Design [J]. Journal of Mechanical Engineering, 2026, 62(7): 67-96.
[9]	ZHAO Xiangyang, JIAO Yanlong, HOU Xinxiang, WANG Jin, XING Jiankang, XIE Tianwei, ZHOU Na, LI Yupeng, JI Fengchuan, PENG Yan. Research on Service Accuracy of Roll System Assembly Structure of Rolling Mill [J]. Journal of Mechanical Engineering, 2026, 62(6): 29-46.
[10]	DENG Jiadong, GUAN Shanyue, WANG Xiaokai, QIAN Dongsheng, LIU Chao, LIU Wei, HUA Lin. Development and Application of Network Collaborative and Intelligent Ring Rolling Technology for High-end Equipment Large Rings [J]. Journal of Mechanical Engineering, 2026, 62(6): 65-86.
[11]	CAO Xianming, DANG Yuehui, CHEN Zejun, CONG Fuguan, ZHANG Yunlong, WANG Qiang. Research on Structure and Impact Property of Hot Roll bonded laminated 7A01/7A52 Aluminum Alloy Plates [J]. Journal of Mechanical Engineering, 2026, 62(6): 154-162.
[12]	SU Yonglei, YIN Daozhi, ZHANG Zhifei, DING Zhi. Lightweight Design Method for Vehicle Body Mega-casting Components [J]. Journal of Mechanical Engineering, 2026, 62(5): 306-318.
[13]	JIANG Kai, LIU Zhifeng, CHENG Qiang, CHEN Chuanhai, ZHANG Tao. Research on Dynamic Characteristics of the Heavy-duty Machine Tool- foundation System(HDMTFS) Based on the Linear Multi-body Transfer Matrix Method [J]. Journal of Mechanical Engineering, 2026, 62(5): 357-373.
[14]	SHU Zhengtao, ZHAO Kang, GAO Liang, LI Hao. Optimization Design Method for Hollow Isotropic Lattice Structures [J]. Journal of Mechanical Engineering, 2026, 62(5): 408-418.
[15]	WANG Nianwen, WAN Zhonghua, XU Li, JIA Xiaolu, ZHANG Lijie, XIE Ping. Design and Control System of a Coupled Bionic Mechanism for Hand Rehabilitation [J]. Journal of Mechanical Engineering, 2026, 62(5): 133-150.

STUDY ON THE APPLICATION OF RADIO-FREQUENCY SIGNAL IN FLAW CLASSIFICATION OF ULTRASONIC TESTING

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments