RELIABILITY OF CERAMIC CUTTING TOOL LIFE BY WEAR

Abstract

Abstract: Under the conditions of continuous cutting, the abrasion wear is the principal failure mechanism for the alumina-based ceramic cutting tools. The tool life by wear is subject to the logarithmic normal distribution. The classical and fuzzy reliability can be calculated by Monte Carlo simulation in combination with the cutting experiments. It is proved that the reliability is primarily affected by the fracture toughness so that it can estimate the tool reliability by this parameter. The fuzzy reliability is more reasonable than classical reliability.

Key words: Ceramic cutting tools, Monte Carlo, Reliability Fuzzy, Wear

CLC Number:

TG729

Fan Ning;Ai Xing;Deng Jianxin. RELIABILITY OF CERAMIC CUTTING TOOL LIFE BY WEAR[J]. , 2002, 38(4): 30-35.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2002/V38/I4/30

[1]	WU Jianyang, WANG Junye, YANG Bo, DING Xiaolin, LIU Xin, ZHANG Lei. Research on All-wheel Steering Control Strategy for Multi-axle Heavy-duty Distributed Drive Electric Vehicles [J]. Journal of Mechanical Engineering, 2026, 62(8): 317-331.
[2]	HU Qiwei, SUN Yongji, ZHANG Jianchao, REN Xinyi, GAO Huimin, JI Ce, HUANG Huagui. Research on Surface Wear Detection Method for Hot Rolling Work Roll Based on Texture Features and Ensemble Learning [J]. Journal of Mechanical Engineering, 2026, 62(6): 111-120.
[3]	CHEN Anhang, ZHANG Haixia, YUAN Dongfeng, HAN Qiaojian, LI Na, CAO Feng. Data-mechanism Dual-model Fusion Method for Tool Wear Monitoring [J]. Journal of Mechanical Engineering, 2026, 62(4): 37-51.
[4]	ZHU Zhihong, MIU Junwei, WANG Yujian, LI Wanli. Computer-aided Design of Multimodal Non-spherical Cu Pastes and Their Low-temperature Sintering Behaviors [J]. Journal of Mechanical Engineering, 2026, 62(4): 215-223.
[5]	SUN Hao, YANG Jintian, LIN Jiawen, DONG Hui, GAO Yongzhuo, DONG Wei, HE Long, LI Wenjung. Wearable Integrated Devices for Moisture Energy Generation and Sensing [J]. Journal of Mechanical Engineering, 2026, 62(2): 91-103.
[6]	HAN Bingyuan, CHEN Ziming, DU Wenbo, ZHAO Yonglin, YANG Jun, ZHU Sheng. Research Status and Prospects of Preparation of High Entropy Alloy Wear Resistant Coatings [J]. Journal of Mechanical Engineering, 2026, 62(2): 131-145.
[7]	CHAI Feifan, YANG Yunfan, LING Liang, WANG Kaiyun, ZHAI Wanming. High-speed Wheel/Rail Contact Characteristics under Hunting Condition [J]. Journal of Mechanical Engineering, 2026, 62(2): 329-343.
[8]	LIN Pengyu, LI Tao, SONG Junjie, MAO Yu, ZHANG Ziyi, YOU Xin, HU Litian, ZHANG Yongsheng. Investigating the Effect of h-BN Shape on the High-temperature Tribological Properties of Si₃N₄-matrixed Composite Ceramics [J]. Journal of Mechanical Engineering, 2026, 62(1): 148-158.
[9]	LIU Yunhai, ZHENG Duyuan, ZHU Xiaohua. Simulation of Erosion Behavior and Mechanism of Buffer Elbow in Fracturing Manifold Based on CFD-DPM-MD [J]. Journal of Mechanical Engineering, 2026, 62(1): 296-309.
[10]	HUANG Mian, YANG Bing, LIAO Zhen, Lü Peijin, XIAO Shoune, YANG Guangwu, ZHU Tao. Research on Wear of Pantograph Slide Plate: A Review [J]. Journal of Mechanical Engineering, 2025, 61(8): 193-213.
[11]	CHEN Yuhong, LI Jiaxin, ZHANG Genge, WEN Zefeng, TAO Gongquan. Metro Wheel Profile Design with Low Flange Wear Based on Multi-objective Optimization [J]. Journal of Mechanical Engineering, 2025, 61(8): 261-271.
[12]	SU Youliang, WEN Tianhao, MENG Zhijian, LIU Junqiang, ZHANG Bo. Wear Mechanism and Wear Suppression at the Nanoscale of Diamond Tools in Cutting CFRP [J]. Journal of Mechanical Engineering, 2025, 61(7): 181-197.
[13]	DUAN Shiwen, LIU Zenghua, TAO Gongquan, XIE Chenxi, WANG Peng, WEN Zefeng. Analysis of Metro Wheel Out-of-round Features and Construction of Wheel Roughness Spectra [J]. Journal of Mechanical Engineering, 2025, 61(24): 213-222.
[14]	XIAO qian, Cui zhengchun, XU Zhongxu, SHEN Yue. Research on The Effect of Wheel Wear on Equivalent Conicity of High-Speed Trains [J]. Journal of Mechanical Engineering, 2025, 61(24): 339-350.
[15]	LU Yanjun, YE Yonghui, GUAN Weifeng, CHEN Yuhan, ZHU Xueming, WU Yongbo. Process Optimization and Wear Mechanism of Ultrasonic-assisted Milling of Titanium Alloy Based on PVD-coated Tools [J]. Journal of Mechanical Engineering, 2025, 61(23): 344-360.

RELIABILITY OF CERAMIC CUTTING TOOL LIFE BY WEAR

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments