BUNDLE METHOD AND ITS APPLICATIONS IN ENGINEERING OPTIMIZATION

›› 2002, Vol. 38 ›› Issue (4): 11-16.

• Article • Previous Articles Next Articles

BUNDLE METHOD AND ITS APPLICATIONS IN ENGINEERING OPTIMIZATION

Wang Zhouhong;Zhong Yifang;Chen Yibao

Huazhong University of Science and Technology

Published:2002-04-15

Abstract

Abstract: Deals with a bundle algorithm for nonsmooth and noconvex optimization and its numerical implementation．A numerical method for the computation of subgradient and a method for updating the variable metric factor for nonconvex problems are presented．Finally，some numerical results are presented to show its efficiency and numerical stability．

Key words: Bundle methods, design, implementation, Nonsmooth and nonconvex optimal engineering, Numerical

CLC Number:

TH112.1

Wang Zhouhong;Zhong Yifang;Chen Yibao. BUNDLE METHOD AND ITS APPLICATIONS IN ENGINEERING OPTIMIZATION[J]. , 2002, 38(4): 11-16.

[1]	ZHANG Yunshu, WU Bintao, ZHAO Yun, DING Donghong, PAN Zengxi, LI Huijun. Research Progress in the Numerical Simulation of Heat and Mass Transfer during Wire Arc Additive Manufacturing [J]. Journal of Mechanical Engineering, 2024, 60(8): 65-80.
[2]	TAO Liang, TANG Yu, LI Yuanqiang, ZHANG Dashan, ZHANG Xiaolong. Design of Intelligent Tire Development Platform with Multiple In-tire Sensors and Research on Tire Cornering Test [J]. Journal of Mechanical Engineering, 2024, 60(8): 245-255.
[3]	HUANG Gongrui, ZHU Yangli, XIONG Jun, WANG Xing, LI Wen, CHEN Haisheng. Review on the Axial Turbine Long-blade Stage Characteristics under Off-design Conditions [J]. Journal of Mechanical Engineering, 2024, 60(8): 271-290.
[4]	ZHENG Yang, ZHAO Zihao, LIU Wei, YU Zhengzhe, NIU Wei, LEI Yiwen, SUN Ronglu. Research Progress in High-performance Mg Alloys Prepared by Additive Manufacturing [J]. Journal of Mechanical Engineering, 2024, 60(7): 385-400.
[5]	REN Shan, WANG Jin, ZHAO Xin, ZHANG Yingfeng. “Doubly-fed” Manufacturing Service of Intelligent Design and Preventive Maintenance for Complex Products [J]. Journal of Mechanical Engineering, 2024, 60(6): 127-136.
[6]	ZHANG Fengli, ZHANG Rongrong, LUO Qiuli, ZHANG Yadong, LI Bing, GUO Hui. Research on the Aerodynamic Noise Mechanism and Noise Reduction of SUV Roof Hollow Spoiler [J]. Journal of Mechanical Engineering, 2024, 60(6): 398-408.
[7]	ZHANG Liyuan, YANG Jinbo, LI Ao, YANG Qingkai, XU Guangkui. Review on Configuration Design and Control of Tensegrity Spherical Robots [J]. Journal of Mechanical Engineering, 2024, 60(5): 1-18.
[8]	ZHAO Ping, ZHANG Yating, CHENG Yue, XU Hongwei, ZI Bin. Multi-task Trajectory Synthesis Method of Single-DOF Stephenson Mechanisms Based on Sensitivity Analysis [J]. Journal of Mechanical Engineering, 2024, 60(5): 59-69.
[9]	MENG Yuan, SHI Baojun, ZHANG Dequan. Research and Improvement of Kriging-HDMR Modeling Method [J]. Journal of Mechanical Engineering, 2024, 60(5): 249-263.
[10]	ZHU Shangshang, YU Huiling, DONG Yenan, LUO Shijian. A Product Creative Design Method That Incorporates the Creation of Consumer Groups [J]. Journal of Mechanical Engineering, 2024, 60(5): 276-287.
[11]	HU Long, LIU Hongyan, CHENG Huimei, CHEN Weiqi, FENG Guangjie, YE Yanhong, DENG Dean. Study on Residual Stress of Multi-layer and Multi-pass Butt-welded Joint for Ultra-high Strength Wear-resistant Steel NM500 [J]. Journal of Mechanical Engineering, 2024, 60(4): 335-344.
[12]	GAO Qiang, WANG Jian, ZHANG Yan, ZHENG Xuyang, LÜ Hao, YIN Guodong. Topology Optimization Approaches and Its Application and Prospect in Transportation Engineering [J]. Journal of Mechanical Engineering, 2024, 60(4): 369-390.
[13]	ZONG Huaizhi, AI Jikun, ZHANG Junhui, JIANG Lei, TAN Shujie, LIU Yuxian, SU Qi, XU Bing. Lightweight Design of Limb Leg Units for Hydraulic Quadruped Robots by Topology Optimization and Lattice Filling [J]. Journal of Mechanical Engineering, 2024, 60(4): 420-429.
[14]	XIE Chao, ZHANG Enjie, YAN Biao, GAO Feng, YANG Jinping, FANG Guangqiang, WANG Zhiyi. Configuration Design and Demonstration of a Spaceborne Deployable Membrane Array Antenna [J]. Journal of Mechanical Engineering, 2024, 60(3): 11-27.
[15]	LIU Xiaofei, WAN Bo, WANG Yu, LI Mingyu, ZHAO Yongsheng. Design, Analysis and Performance Optimization of a Novel Super-redundantly Actuated Hybrid Robot [J]. Journal of Mechanical Engineering, 2024, 60(3): 55-67.

BUNDLE METHOD AND ITS APPLICATIONS IN ENGINEERING OPTIMIZATION

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments