STUDY ON ALLOY STEEL GUIDE ROLLER WITH WEAR RESISTANCE AT HIGH TEMPERATURE AND CHARACTERISTIC OF WEAR RESISTANCE

Abstract

Abstract: A kind of Alloy steel with austenite base and band carbide particle is studied and made into guide rollers that are used in steel rolling production line with high speed. The guide rollers made by the alloy steel have good wear resistance at the temperature up to 560℃. After analyzing the influence of ageing temperature on the hardness of austenite base and the wear-resistance of the alloy steel, studies show that increasing the hardness of austenite base has a good effect on improving the wear resistance of the alloy steel at high temperature

Key words: Alloy steel, Guide roller, High temperature, Wear resistance

CLC Number:

TG142.72

Li Changhong;He Qingfu. STUDY ON ALLOY STEEL GUIDE ROLLER WITH WEAR RESISTANCE AT HIGH TEMPERATURE AND CHARACTERISTIC OF WEAR RESISTANCE[J]. , 2001, 37(4): 86-88.

[1]	ZHAO Erhui, SHAO Bo, QIAO Miaojie, QUAN Long, WANG Chengwen. Study on the Elastohydrodynamic Lubrication Characteristics of the Vane-stator Pair in High Pressure Vane Pump [J]. Journal of Mechanical Engineering, 2024, 60(8): 308-319.
[2]	GAO Dejun, WU Shaowang, YANG Shengxu, ZHANG Chenghao, ZHOU Long, SI Xiaoqing, LI Chun, QI Junlei, CAO Jian. Study on the Influences of High Temperature Treatment on the Interfacial Microstructure and Mechanical Properties of TA1/TC4 Brazed Joints [J]. Journal of Mechanical Engineering, 2024, 60(14): 109-116.
[3]	YIN Shaohua, ZHANG Zhenhua, SUN Zhiqiang, LUO Zhen. Long-term High Temperature Aging on the Microstructure of T23 Water-cooled Wall Welds Influences [J]. Journal of Mechanical Engineering, 2024, 60(12): 277-286.
[4]	MOU Honglin, CAI Zhihai, MA Guozheng, ZHU Xianyong, ZHOU Li, HE Pengfei, LIU Ming, WANG Haidou. Research Status and Prospect of Wear-resistant and Self-lubricating Coatings with Wide Temperature Range by Thermal Spraying [J]. Journal of Mechanical Engineering, 2023, 59(7): 139-155.
[5]	WANG Huipeng, ZHU Penghua, SHU Fengyuan, HE Peng, LIU Cunyu. Simulation and Performance Research of Laser Cladding Temperature Field on 65Mn Steel Surface [J]. Journal of Mechanical Engineering, 2023, 59(7): 216-224.
[6]	LÜ Yingying, BAO Guangqing. Optimization and Characteristic Analysis of HTS Double-stator Permanent Magnet Vernier Machine [J]. Journal of Electrical Engineering, 2023, 18(3): 175-183.
[7]	LONG Weimin, LIU Dashuang, WU Aiping, ZHONG Sujuan, WANG Decheng. Influence of Size and Content on the Wear Resistance of Induction Brazing Diamond Coating in Air [J]. Journal of Mechanical Engineering, 2023, 59(12): 225-235.
[8]	CAI Wang, WANG Chunhui, SUN Chaoyang, MA Jinyao, LI Yuemin, JIANG Jun, ZHANG Yuefei. Investigation of Deformation Behavior of TWIP Steel Using Crystal Plasticity Coupling Temperature Effect [J]. Journal of Mechanical Engineering, 2022, 58(20): 283-293.
[9]	LI Yuan, XU Lianyong, GAO Yu, JING Hongyang, ZHAO Lei, HAN Yongdian. High Temperature Creep Behavior of Sn-Ag-Cu Solder Joints Reinforced by Graphene via Nanoindentation [J]. Journal of Mechanical Engineering, 2022, 58(2): 50-57.
[10]	SHI Yameng, LI Jingbin, ZHANG Jie, WEN Baoqin, LI Liqiao, WANG Xianfei. Effect of Process Parameters on Microstructure and Wear Resistance of 65Mn-based Cladding Ni60a/SiC Coating [J]. Journal of Mechanical Engineering, 2022, 58(16): 197-205.
[11]	LIANG Xiaorui, XU Fangmeng, XUE Tao, TAN Qiulin, DONG Helei, XIONG Jijun. Microstructure Manufacturing Technology of Acoustic Surface Wave High Temperature Pressure Devices Based on Langasite [J]. Journal of Mechanical Engineering, 2021, 57(8): 81-89.
[12]	JIANG Hongwan, WANG Chengyong, REN Zhongwei, CHEN Wanglin, HE Lin. Behavior Strengthening of Superficial Layer of High Strength Alloy Steel in Machining Process [J]. Journal of Mechanical Engineering, 2021, 57(23): 262-272.
[13]	LIU Liqiang, ZHANG Xiancheng, TAN Jianping, WANG Runzi, TU Shantung. Research Progress of High Temperature Mechanical Test Technology in Severe Environment [J]. Journal of Mechanical Engineering, 2021, 57(16): 3-15.
[14]	LI Yunfeng, SHI Yan. Investigation on Microstructure and Performance of Wear-resistant and Impact-resistant Composite Coating Produced by Laser Cladding [J]. Journal of Mechanical Engineering, 2021, 57(12): 237-246.
[15]	ZHENG Kai, WU Xing, LI Junyan, NI Chenyin, SHEN Zhonghua, MA Xiangdong, YU Yanping, HE Junhua. Laser Ultrasonic Evaluation of Metallic Material Thickness at High Temperature [J]. Journal of Mechanical Engineering, 2021, 57(10): 21-27.

STUDY ON ALLOY STEEL GUIDE ROLLER WITH WEAR RESISTANCE AT HIGH TEMPERATURE AND CHARACTERISTIC OF WEAR RESISTANCE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments