SURVEYING OF PEENING FORCE FOR COLD-WELDING METAL AND STUDYING ON THE PEENING EFFECT

Abstract

Abstract: F-t curve for peening and peening force is surveyed by strain electric methods. Post-weld peening above φp, exerted a "casting-forging" unitized working on welds, which improved the microstructure morphology, decreased the amount of micro-defects and increased dislocation density and subcrystalline boundary, then improved the toughness and strength by 30% and 15% respectively. But if the welds were peened improperly, contrary effect would be caused.

Key words: Cold-welding Peening, High hardness welds, Welding recondition, Joining, Microstructure, Nickel-based superalloys, Strength, Titanium aluminides

CLC Number:

TG456.4

Ren Dengyi;Zhang Yuanbin;Zou Zengda. SURVEYING OF PEENING FORCE FOR COLD-WELDING METAL AND STUDYING ON THE PEENING EFFECT[J]. , 1999, 35(6): 66-69.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1999/V35/I6/66

[1]	XIA Ziwen, SHAN Chenwei, ZHANG Mengmeng, LIU Wengang, CUI Minchao, LUO Ming. Influence of Elliptical Ultrasonic Vibration Milling on Cutting Characteristics and Subsurface Mechanical Properties of GH4169 [J]. Journal of Mechanical Engineering, 2026, 62(7): 439-451.
[2]	WEI Zhaocheng, ZENG Wen, SHI Ning, FANG Yuxin, LI Jiasheng, GUO Minglong. Development of a Highly Repeatable Control Method Based on Ultrasonic Stress Measurement and Its Application [J]. Journal of Mechanical Engineering, 2026, 62(6): 209-219.
[3]	LIU Jiaxu, WANG Dacheng, SHI Mingjie, CHEN Shuaifeng, ZHANG Shihong, CHENG Ming. Investigation on Microstructure Evolution of Aero-engine Blades under Combined Forming Process with Flat Cross Wedge Rolling and Die Forging [J]. Journal of Mechanical Engineering, 2026, 62(6): 87-99.
[4]	ZHOU Qiang, LU Honghong, GUO Denggang, CHEN Pengwan, WANG Baoyu. Microstructure and Mechanical Behavior of TA2/TC4 Titanium Alloy Composites Fabricated by Explosion Welding + Rolling [J]. Journal of Mechanical Engineering, 2026, 62(6): 100-110.
[5]	ZHAO Wei, CHANG Jiajun, WEI Qingsong, WU Jiamin, YE Chunsheng, HUANG Shuangjun. Influence of Silicon Nitride Combined with Silica Sol Infiltration on the Properties of Alumina Ceramic Cores via Binder Jetting [J]. Journal of Mechanical Engineering, 2026, 62(5): 287-296.
[6]	YANG Yinru, GAO Hang, TIAN Yachuang, LIU Jianbao. Experimental Study on Ultrasonic Welding Technology of High Temperature Resistant Thermoplastic Carbon Fiber Composites [J]. Journal of Mechanical Engineering, 2026, 62(5): 297-305.
[7]	ZHAO Mingjie, LU An, HUANG Liang, JIANG Lihong, LI Jianjun, GUO Zhenghua. Influence of Austenitizing Temperature on the Hot Deformation Behaviors of High-strength Steel [J]. Journal of Mechanical Engineering, 2026, 62(5): 390-398.
[8]	BAI Zhaoruo, HUANG Kanghua, TANG Mingjun, FENG Shulong, FENG Feng, ZHANG Jianfu, FENG Pingfa, ZHANG Xiangyu. A Controllable High-precision High-speed Ultrasonic Peening Method for Hole Chamfer and the Analysis of Surface Integrity [J]. Journal of Mechanical Engineering, 2026, 62(5): 434-442.
[9]	LI Xiaohua, LI Xu, HAN Yuejiao, WANG Pengfei, ZHANG Dianhua, ZHANG Yong. Prediction and Regulation of Multi-pass Coupled Modeling for Cold Rolling of High-strength Strip Based on Genetic Inheritance of Property Inhomogeneity [J]. Journal of Mechanical Engineering, 2026, 62(4): 135-147.
[10]	ZHENG Wenjian, HU Minghui, YU Yang, FENG Daochen, YAN Dejun, YANG Jianguo. Study on the Influence of Softening Behavior of High Magnesium Aluminum Alloy Welded Joint on Welding Residual Stress [J]. Journal of Mechanical Engineering, 2026, 62(4): 180-189.
[11]	ZHU Zhihong, MIU Junwei, WANG Yujian, LI Wanli. Computer-aided Design of Multimodal Non-spherical Cu Pastes and Their Low-temperature Sintering Behaviors [J]. Journal of Mechanical Engineering, 2026, 62(4): 215-223.
[12]	HAN Xinyu, LIU Junsong, SHI Yan. Properties of B₄Cp/Al Composites Prepared by Laser Powder Bed Fusion [J]. Journal of Mechanical Engineering, 2026, 62(4): 224-232.
[13]	ZHAN Xiaohong, GAO Zhuanni, ZHANG Kaiyu, WANG Jianfeng, LI Xiang, XU Fangda. The Coupling Evolution Mechanism of Microstructure and Pores during Laser Coaxial Wire Additive Manufacturing of 205C/7075 Aluminum Alloy [J]. Journal of Mechanical Engineering, 2026, 62(3): 160-175.
[14]	LIU He, GU Dongdong, LI Linxuan, PEI Bin, ZHOU Youyou. Process and Capillary Performance of High-strength Aluminum Micro-structures Fabricated by Micro Laser Powder Bed Fusion [J]. Journal of Mechanical Engineering, 2026, 62(3): 190-202.
[15]	HU Xuzhao, ZHANG Dianbao, XU Zhenlin, CHEN Xianglin, FANG Fang, XIA Ailin. Effect of Annealing on the Magnetic and Mechanical Properties of AlCoCrCuFeNi High-entropy Alloy Prepared by the Laser Powder Bed Fusion [J]. Journal of Mechanical Engineering, 2026, 62(3): 235-247.

SURVEYING OF PEENING FORCE FOR COLD-WELDING METAL AND STUDYING ON THE PEENING EFFECT

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments