STUDY ON FRICTIONAL WEAR SPECIALITY OF THE COMPOSITE PLATING LAYERS

[1]

CHEN Xuehui, LI Wei, LIU Wei, LI Hao, HUANG Lei, WANG Zijian, HE Hongbin. Excavator Working Device Based on Dynamic Characteristics Analysis of Clearance Wear Mechanism of End Face Friction Pair [J]. Journal of Mechanical Engineering, 2022, 58(19): 191-205.

[2]

TAO Gongquan, WEN Zefeng, JIN Xuesong. Advances in Formation Mechanism and Mitigation Measures of Out-of-round Railway Vehicle Wheels [J]. Journal of Mechanical Engineering, 2021, 57(6): 106-120.

[3]

WU Qiaoping, OUYANG Zhiyong, YANG Hui, SONG Kun, DENG Zhaohui. Influence of Carbon Nanotubes on Electrolytic Dressing Grinding Performance of a Multi-layer Brazed Coarse-grained Diamond Wheel [J]. Journal of Mechanical Engineering, 2020, 56(7): 231-239.

[4]

LIU Qingdong, ZHANG Hao, ZENG Qifeng, LU Junqiang, LI Cong, ZHANG Lefu. Pre-transition Corrosion Behavior of SZA-4 and ZIRLO Alloys in Dissolved Oxygen Aqueous Condition at 360℃ [J]. Journal of Mechanical Engineering, 2019, 55(8): 88-96.

[5]

FENG Changqing, ZHAO Wei, SUN Yuan, AN Jian. High Temperature Wear Behavior of Mg97Zn1Y2 Magnesium Alloy [J]. Journal of Mechanical Engineering, 2019, 55(24): 66-71.

[6]

QIN Hongling, GUO Wentao, LI Xuefei, ZHAO Xinze, XU Xiang. Tribological Performance of Gate Bottom Pivot Friction Pair QT600-3/40Cr and Its Wear Surface Power Spectral Density Characterization [J]. Journal of Mechanical Engineering, 2019, 55(17): 102-109.

[7]

SHAN Zhongde, ZHU Fuxian. Wear Mechanism and Prediction Model of Polycrystalline Diamond Tool in Milling Sand Mould [J]. Journal of Mechanical Engineering, 2018, 54(17): 124-132.

[8]

ZHANG Gaimei, WANG Can, SONG Xiaoli, HE Cunfu, CHEN Qiang. Characterization and Measurement of Elastic Modulus Based on Ultrasonic Atomic Force Microscopy for Nano-porous Silicon Oxide Film [J]. Journal of Mechanical Engineering, 2018, 54(12): 109-114.

[9]

AN Dongqi, XIAO Hongwei, LI Dongcheng, WEN Zi. Investigation on the Mild to Severe Wear Transition for AZ System Magnesium Alloys [J]. Journal of Mechanical Engineering, 2016, 52(6): 79-85.

[10]

WEN Xuelong, GONG Yadong, CHENG Jun, BA Dechun. Mechanism Analysis and Experimental Research on Wear of Electroplated Diamond Micro-grinding Tool [J]. Journal of Mechanical Engineering, 2015, 51(11): 177-185.

[11]

JIANG Zenghui;WANG Linlin;SHI Li;WU Yueying. Study on Tool Wear Mechanism and Characteristics of Carbide Tools in Cutting Ti6Al4V [J]. , 2014, 50(1): 178-184.

[12]

DENG Zhaohui;WU Qiaoping;ZHANG Gaofeng;ZHANG Bi;WANG Zheneng. The Cutting Performance and Wear Mechanisms of a New Polycrystalline Diamond Compacts Cutter Tool [J]. , 2011, 47(7): 178-184.

[13]

[14]

[15]

Knowledge