ANALYSES ON FEED KINEMATIC BEHAVIORS IN TURNING OF NONCIRCULAR SECTIONAL ELEMENT BASED ON FOURIER SERIES

Abstract

Abstract: A technical analysis method used to kinematic behaviors of feeding mechanism for noncircular sectional turning based on Fourier series is put forward. With analyses on noncircular sectional shape characteristics, feed speed and acceleration behaviors, the driving dynamics model of feed mechanism is built. This method can be used to determine its machinability and draw out the original data for development of turning feed system for noncircular sectional elements, and build the relationship of noncircular sectional shapes and the kinematic behaviors of turning feed mechanisms.

Key words: Feed, Fourier series, Kinematics analyses, Noncircular section, Turning

CLC Number:

TG51

Deng Zhongliang;Wang Xiankui. ANALYSES ON FEED KINEMATIC BEHAVIORS IN TURNING OF NONCIRCULAR SECTIONAL ELEMENT BASED ON FOURIER SERIES[J]. , 1999, 35(2): 10-14.

[1]	GE Lei, NI Hao, HAO Yunxiao, ZHAO Bin, YUAN Yongliang, QUAN Long. Dead Zone Compensation Control of New Hydraulic Motor-mechanical Linear Actuator [J]. Journal of Mechanical Engineering, 2024, 60(8): 337-347.
[2]	LIU Annan, LIU Zhanqiang, CAI Shixiang, ZHAO Jinfu, WANG Bing. Advanced Devices and Technologies for Chip Breaking of Turning Tool Inserts: A review [J]. Journal of Mechanical Engineering, 2024, 60(7): 334-349.
[3]	CHEN Zhixu, LI Chenxing, YANG Chunli. Research on Robotic Gas Tungsten Arc and Wire-Based Deposition Process for Repairing Damaged Blades [J]. Journal of Mechanical Engineering, 2024, 60(6): 187-196.
[4]	YANG Wei, TANG Xiaolin, JIANG Kongming, FU Yang, HAN Lei. Research on Friction Compensation Model and Control Method of Electric Brake Assist System [J]. Journal of Mechanical Engineering, 2024, 60(2): 252-261.
[5]	XU Yuanzhi, JIAO Zongxia, FENG Hao, XIE Yan, YANG Chongyang, XIE Zuojian, LIU Zehua, JIN Yaolan, MENG Shaokang. Analysis and Suppression for Self-excited Vibration of Aircraft Hydraulic Braking System [J]. Journal of Mechanical Engineering, 2024, 60(16): 200-208.
[6]	DU Jianbiao, ZHANG Qiang, ZONG Wenjun. Summary of Single Point Diamond Turning Technology for Hard, Brittle and ferrous Metal Materials [J]. Journal of Mechanical Engineering, 2023, 59(7): 156-175.
[7]	HU Yawen, JIANG Li, YANG Bin. Research Progress of Sensory Feedback for Intelligent Upper-limb Prosthesis [J]. Journal of Mechanical Engineering, 2023, 59(5): 1-10.
[8]	ZHU Qixin, YU Bin, WANG Chunyu, BA Kaixian, KONG Xiangdong. Research on Feedforward Disturbance Rejection Control for Force-based Impedance Control System of Hydraulic Drive Unit [J]. Journal of Mechanical Engineering, 2023, 59(4): 295-307.
[9]	WANG Xinqing, WANG Xin, SHI Nianling, CHEN Zhaopeng. Design of Flexible Joint Controller Based on Desired Dynamics [J]. Journal of Mechanical Engineering, 2023, 59(3): 38-45.
[10]	LIU Qi, LU Hong, ZHANG Xinbao, DAI Jiashun. Research on State-dependent Dynamic Characteristics of H-type Dual Drive Feed System Based on Electro-mechanical and Rigid-flexible Coupling [J]. Journal of Mechanical Engineering, 2023, 59(3): 98-109.
[11]	HUANG Yongjun, GUO Qiang, LI Shan, CHENG Fuquan. Power Feedback Control Strategy of Current Source PWM Rectifier Without Grid Side Current Sensor under Unbalanced Grid Voltage [J]. Journal of Electrical Engineering, 2023, 18(3): 184-195.
[12]	REN Haoling, WU Jiangdong, LIN Tianliang, ZHANG Chunhui, LI Yukun. Construction Machinery Localization and Mapping System Based on Multi-sensor Tight Coupling [J]. Journal of Mechanical Engineering, 2023, 59(24): 323-333.
[13]	CHEN Lei, LIU Yangqin, TANG Chuan, JIANG Yilong, SHI Pengfei, QIAN Linmao. Research Advance on Material Removal at Microscale towards Ultra-precision Manufacturing [J]. Journal of Mechanical Engineering, 2023, 59(23): 229-264.
[14]	YE Wenchang, GUO Bicheng, DENG Zhaohui, WANG Wei, ZOU Lingli, LIU Chao, YIN Ganggang, JIANG Feng. Advances in Key Technologies of the Intelligence Tool [J]. Journal of Mechanical Engineering, 2023, 59(23): 265-282.
[15]	HUANG Weiwei, ZHANG Xinquan, ZHU Limin. Repetitive-control-based Feedforward Compensation Method for Fast Tool Servo System [J]. Journal of Mechanical Engineering, 2023, 59(21): 43-51.

ANALYSES ON FEED KINEMATIC BEHAVIORS IN TURNING OF NONCIRCULAR SECTIONAL ELEMENT BASED ON FOURIER SERIES

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments