APPROACH TO THE MEASUREMENT INFORMATION MODELING OF PRODUCT IN MANUFACTURE PROCEDURE

Abstract

Abstract: The purpose of the establishment of the measurement and detection information (MMDI) of product in manufacture procedure are expressed. The research foundation of MMDI is analyzed. The general and some special demands of the technique of MMDI are discussed. According to these, the related model of acquirement and expression of the information of measurement and detection are put forward, where the principle of concurrent engineering is followed and the artificial intelligence and unionization of human-machine and object oriented techniques are appreciated.

Key words: Detection, Information, Measurement, Mechanical manufacture, Model

CLC Number:

TP164

Mo Jinqiu;Zhou Xiaojun;Cheng Yaodong. APPROACH TO THE MEASUREMENT INFORMATION MODELING OF PRODUCT IN MANUFACTURE PROCEDURE[J]. , 1998, 34(6): 16-22.

[1]	DONG Zhigang, WANG Zhongwang, RAN Yichuan, BAO Yan, KANG Renke. Advances in Ultrasonic Vibration-assisted Milling of Carbon Fiber Reinforced Ceramic Matrix Composites [J]. Journal of Mechanical Engineering, 2024, 60(9): 26-56.
[2]	CUI Xin, LI Changhe, ZHANG Yanbin, YANG Min, ZHOU Zongming, LIU Bo, WANG Chunjin. Force Model and Verification of Magnetic Traction Nanolubricant Grinding [J]. Journal of Mechanical Engineering, 2024, 60(9): 323-337.
[3]	WEI Rong, XU Moran, LI Changping, LI Shujian, LI Pengnan. Modeling of Multi-energy Field and Regulation Optimization for Electric Discharge Assisted Milling (EDAM) of Titanium Alloys [J]. Journal of Mechanical Engineering, 2024, 60(9): 393-409.
[4]	HAN Jianchao, ZHANG Mengfei, WANG Bin, GUO Shenghui, JIA Yi, WANG Tao. Analysis of Electroplastic Constitutive Equation and Multi-physical Field Coupling of Titanium Alloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 421-433.
[5]	ZHANG Yunshu, WU Bintao, ZHAO Yun, DING Donghong, PAN Zengxi, LI Huijun. Research Progress in the Numerical Simulation of Heat and Mass Transfer during Wire Arc Additive Manufacturing [J]. Journal of Mechanical Engineering, 2024, 60(8): 65-80.
[6]	ZHANG Yusen, CHEN Lei, LIU Shengjie, HU Junhua, ZHANG Qifei, CUI Mingliang, HU Jianliang, JIN Miao. Mechanism for the Macrostructure Coarse Grain of TB6 Titanium Alloy Die Forging and Its Prediction [J]. Journal of Mechanical Engineering, 2024, 60(8): 121-131.
[7]	XIE Chenyang, HUANG Jiao, XIAO Guangming, ZHANG Xianjie, WANG Junbiao, LI Yujun. A Algorithm to Generate Representative Volume Elements for Unidirectional Composites Considering Fiber Misalignment [J]. Journal of Mechanical Engineering, 2024, 60(8): 186-195.
[8]	SHI Qin, JIANG Zhengxin, LIU Yiwen, WEI Yujiang, HU Xiaosong, HE Lin. Fractional Order Model-based Estimation for State of Charge in Lithium-ion Battery [J]. Journal of Mechanical Engineering, 2024, 60(8): 224-232,244.
[9]	WANG Fang, HU Shenghui, HU Lin, PENG Ke, SHI Liangliang, WU Hequan, ZOU Tiefang, ZHOU Zhou. Research on Injury Prevention Effectiveness of Cyclist Helmet in Typical Road Cycling Accident Scenarios [J]. Journal of Mechanical Engineering, 2024, 60(8): 256-270.
[10]	ZHANG Hang, FU Kuan, CHEN Minghao, LI Rui, SHI Xinna. Dynamic Evolution and Vibration Reduction Analysis of Multi-section Serial In-pipe Inspection Robot When Crossing Obstacles [J]. Journal of Mechanical Engineering, 2024, 60(8): 348-359.
[11]	CHENG Hongxin, LI Luyi, ZHOU Changcong. Method for Sensitivity Analysis of the Uncertain Distribution Parameters Based on Kriging Model and Surrogate Sampling [J]. Journal of Mechanical Engineering, 2024, 60(8): 370-383.
[12]	LIU Shuiqing, FU Jingyuan, SHEN Xiao, HAN Xu. Wear Modeling and Uncertainty Analysis of Impact Needle for Dispensing Robot [J]. Journal of Mechanical Engineering, 2024, 60(7): 34-44.
[13]	ZHANG Jun, WU Chengyang, FANG Hanliang, SUN Zaichao, WANG Kailong, TANG Tengfei. Investigation on Driving Characteristics of a Z4 Redundantly Actuated Parallel Manipulator [J]. Journal of Mechanical Engineering, 2024, 60(7): 66-78.
[14]	SHANG Deyong, HUANG Xinyi, HUANG Yunshan, ZHANG Tianyou. Research on Rigid-flexible Coupling Dynamics of Delta Parallel Robot Based on Kane Equation [J]. Journal of Mechanical Engineering, 2024, 60(7): 124-133.
[15]	FANG Congfu, LI Hongyang, SHEN Jianyun, WU Xian. Study on Intelligent Prediction of Surface Roughness Based on Integration of Abrasive Characteristics and Process Parameters [J]. Journal of Mechanical Engineering, 2024, 60(7): 224-235.

APPROACH TO THE MEASUREMENT INFORMATION MODELING OF PRODUCT IN MANUFACTURE PROCEDURE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments