| [1] |
LIU Xin, ZHANG Jun, XU Binbin, LIU Hongguang, ZHAO Wanhua.
Controlling Strategy of Preheating Temperature Field in Laser-assisted Machining Process
[J]. Journal of Mechanical Engineering, 2024, 60(9): 218-228.
|
| [2] |
HE Zhe, HUANG Xinchun, SONG Yihui, SHI Yaoyao, ZHANG Zhaoqing, SHI Kaining.
Study on the Evolution of Surface Integrity of DD6 Single Crystal Super Alloy by Grinding Shot Peening Based on the Effect of Service Temperature
[J]. Journal of Mechanical Engineering, 2024, 60(9): 410-420.
|
| [3] |
LUO Zhong, SHI Baolong, WU Fayong, LI Yuqi, LIU Kaining, ZHANG Xiaoxia.
Study on the Vibration Characteristics of Bolted Joint Rotor System Considering Assembly Technology
[J]. Journal of Mechanical Engineering, 2024, 60(8): 396-406.
|
| [4] |
DENG Jianxin, YUAN Bangyi, HUANG Qiulin, DING Dukun, XIN Manyu, LIU Guangming.
Review on the Key Technologies of Complex Surfaces Polishing Based on Robots
[J]. Journal of Mechanical Engineering, 2024, 60(7): 1-21.
|
| [5] |
JIANG Xinchi, LU Chun, MO Jiliang, CHEN Xiaoting, ZHANG Qinghe, ZHAO Jing.
Simulation of High-temperature Wear Degradation of Train Brake Pad Friction Block Considering Temperature-dependent Wear Rate
[J]. Journal of Mechanical Engineering, 2024, 60(7): 195-202.
|
| [6] |
DING Wenfeng, ZHAO Junshuai, ZHANG Honggang, ZHAO Biao, SI Wenyuan, SONG Qiang, HUANG Qingfei.
Advances in High Efficiency Precision Grinding and Surface Integrity Control Technology for Gears
[J]. Journal of Mechanical Engineering, 2024, 60(7): 350-373.
|
| [7] |
ZHANG Dang, ZHAO Yongxuan, WANG Zhenjun, ZHANG Yingfeng.
Research on Data-knowledge Driven Intelligent Control Architecture for Discrete Manufacturing System
[J]. Journal of Mechanical Engineering, 2024, 60(6): 1-10,20.
|
| [8] |
HU Song, XU Zhaobo, XIAO Leicai, FENG Pingfa, ZENG Long.
Research on Reconfigurable and Flexible Assembly Technology for Cross-category Products
[J]. Journal of Mechanical Engineering, 2024, 60(6): 69-81.
|
| [9] |
WANG Boshi, CHEN Nannan, CAI Yan, WANG Min.
Low-temperature Fatigue Ductile-to-brittle Transition Behavior and Mechanism for Simulated Coarse-grained Heat-affected Zone of a High-strength Low-alloy Bainite Steel
[J]. Journal of Mechanical Engineering, 2024, 60(6): 271-278.
|
| [10] |
LIU Changhai, ZHAO Zhixue, HU Min, YAN Hao, YANG Qingjun, BAO Gang, ZENG Yishan.
Power-capture Performance of the Hydraulic-type Wave Energy Converter Based on the Individual Metering Technology
[J]. Journal of Mechanical Engineering, 2024, 60(6): 386-397.
|
| [11] |
ZHU Shangshang, YU Huiling, DONG Yenan, LUO Shijian.
A Product Creative Design Method That Incorporates the Creation of Consumer Groups
[J]. Journal of Mechanical Engineering, 2024, 60(5): 276-287.
|
| [12] |
YAN Ruqiang, XU Wengang, WANG Zhiying, ZHU Qixiang, ZHOU Zheng, ZHAO Zhibin, SUN Chuang, WANG Shibin, CHEN Xuefeng, ZHANG Junhui, XU Bing.
Research Status and Challenges on Fault Diagnosis Methodology for Fuel Control System of Aero-engine
[J]. Journal of Mechanical Engineering, 2024, 60(4): 3-31.
|
| [13] |
WANG Xingjian, YANG Xinyu, WANG Shaoping.
Review of Fault-tolerant Control for Flight Control System
[J]. Journal of Mechanical Engineering, 2024, 60(4): 50-65.
|
| [14] |
SHI Jian, LIU Dong, WANG Shaoping.
Digital Twin for Complex Electromechanical-hydraulic System PHM:A Review
[J]. Journal of Mechanical Engineering, 2024, 60(4): 66-81.
|
| [15] |
TIAN Bian, LIU Jiangjiang, ZHANG Zhongkai, LIU Zhaojun, MA Rong, LIN Qijing, JIANG Zhuangde.
Study on High Precision Thin Film Temperature Sensor Based on Multi-node Array Structure
[J]. Journal of Mechanical Engineering, 2024, 60(4): 92-100.
|
