STEADY TEMPERATURE FIELD OF WORM GEAR AND ANALYSIS BY USING FEM

Abstract

Abstract: Mathematical model of the steady temperature field is established by combined research of heat transfer, tribology and meshing theory. Heat transfer coefficient and density of heat flow rate withdraw from the friction on the gear surface are analyzed. By using FEM the relevant program is compiled based on the geometric and kinetic characteristics of worm gear surface. It shows that the calculated result and experiment result are basically agreed with each other. The research results give support to the research of scuffing failure and EHL.

Key words: Density of heat flow rate, Heat transfer, Temperature field, Worm drive

CLC Number:

TH132

Cheng Fuan;Jiao Jinjuan. STEADY TEMPERATURE FIELD OF WORM GEAR AND ANALYSIS BY USING FEM[J]. , 1998, 34(3): 7-12.

[1]	LIU Xin, ZHANG Jun, XU Binbin, LIU Hongguang, ZHAO Wanhua. Controlling Strategy of Preheating Temperature Field in Laser-assisted Machining Process [J]. Journal of Mechanical Engineering, 2024, 60(9): 218-228.
[2]	HE Qingshan, XIE Yongchen, CUI Zhongming, FU Yucan. Development of the Phase Change Heat Storage Composite Wheel for Green Grinding of Difficult-to-cut Materials [J]. Journal of Mechanical Engineering, 2024, 60(3): 405-414.
[3]	LU Haoran, ZOU Mengzhen, LI Zhe. Comparative Study of Long/Short Blade Lithium-ion Batteries Based on Electrochemical-thermal Coupling Model [J]. Journal of Mechanical Engineering, 2024, 60(20): 193-207.
[4]	SHAO Changkun, TANG Yong, CHEN Gong, YU Shudong, YAN Caiman, DING Xinrui, YUAN Wei, ZHANG Shiwei. Development Status and Perspective Trend of Thermal Diodes and Its Thermal Control Functional Structure Manufacture [J]. Journal of Mechanical Engineering, 2024, 60(20): 271-288.
[5]	PENG Wen, ZHANG Li, LI Xudong, LIU Jun, SUN Jie, ZHANG Dianhua. Thermal Behavior and Temperature Uniformity of Rolling Parts during Edge Induction Heating [J]. Journal of Mechanical Engineering, 2024, 60(2): 119-131.
[6]	LIU Kaibao, DAI Yucheng, LIU Changhui, ZHAO Jiateng. Research Progress on the Application of Phase Change Material/Heat Pipe Coupled Heat Storage Technology in Different Fields [J]. Journal of Mechanical Engineering, 2024, 60(18): 183-194.
[7]	CHEN Jiajia, LIU Songyan, YANG Yong, YUAN Dongdong, ZHANG Liyong, FU Yucan, QIAN Ning. Evaluation of Heat Transfer Performance of Nanofluid Heat Pipe Grinding Wheel Forming and Grinding Titanium Alloy [J]. Journal of Mechanical Engineering, 2024, 60(15): 407-419.
[8]	GAO Zhuanni, WANG Leilei, LI Xiang, LIU Zhiqiang, Lü Feiyue, LI Yifan, ZHAN Xiaohong. Effect of Thermal Cycle and Temperature Gradient on Solidification Microstructure of Deposition Layer during 7075 Aluminum Alloy Laser Wire Additive Manufacturing [J]. Journal of Mechanical Engineering, 2024, 60(1): 96-118.
[9]	WANG Huipeng, ZHU Penghua, SHU Fengyuan, HE Peng, LIU Cunyu. Simulation and Performance Research of Laser Cladding Temperature Field on 65Mn Steel Surface [J]. Journal of Mechanical Engineering, 2023, 59(7): 216-224.
[10]	ZHANG Boyang, ZHANG Qingdong, GENG Libo, LIU Jiyang, SHI Yunfei. Study on Interface Heat Transfer and Polymer Film Melting-Filling Behavior During the Laminating Process for Laminated Steel [J]. Journal of Mechanical Engineering, 2023, 59(6): 61-71.
[11]	GAO Zhigang, SHANG Xiaolong, ZHENG Dawen, WANG Tianhu, LI Peng, BAI Junhua. Heat Transfer Characteristics Analysis of Microchannel Heat Sink on Power Module with Non-uniform Heating Dissipation [J]. Journal of Mechanical Engineering, 2023, 59(4): 257-264.
[12]	YOU Tianya, JI Xianbing, GUO Hao, GAN Yuanyuan, MIAO Zheng. Enhancement of Steam Condensation Heat Transfer on the Mastoid-stripe Bilayer Surface [J]. Journal of Mechanical Engineering, 2023, 59(24): 156-163.
[13]	ZHANG Lijun, LIU Shibo, GAN Zhenwei, XU Jiayi, YANG Ning, YANG Bohan, WANG Hang. Study on the Heat Transfer Characteristics of Synthetic Jet and its Cooling Application for MEMS [J]. Journal of Mechanical Engineering, 2023, 59(24): 164-176.
[14]	LIU Mingzheng, LI Changhe, ZHANG Yanbin, YANG Min, CUI Xin, LI Benkai, GAO Teng, WANG Dazhong, AN Qinglong. Heat Transfer Mechanism and Convective Heat Transfer Coefficient Model of Cryogenic Air Minimum Quantity Lubrication Grinding Titanium Alloy [J]. Journal of Mechanical Engineering, 2023, 59(23): 343-357.
[15]	CUI Yue, ZHU Liyan, HU Bin, WEI Dong, DU Yanxia, GUI Yewei. Research on Ultrasonic Synchronous Measurement of Temperature Field and Thickness in High-temperature Structure [J]. Journal of Mechanical Engineering, 2023, 59(22): 215-221.

STEADY TEMPERATURE FIELD OF WORM GEAR AND ANALYSIS BY USING FEM

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments