DETERMINATION OF LIMIT LOAD-BEARING CAPABILITY IN CONICAL PART FORMING

Abstract

Abstract: On the basis of the stress states on the dangerous section of fracture in conical part forming, and in comprehensive consideration of the effects of factors such as geometric dimensions, anisotropy, material work-hardening and so on, load-bearing capability on the dangerous section is derived by mechanical analysis, which serves as the basis for judging whether the process is successfully forming and for determinating the limit deformation degree of conical parts.

Key words: Conical parts, Forming limit, Sheet metal forming, Tensile instability

CLC Number:

TG351

Wan Min;Yang Yuying Li Shuoben. DETERMINATION OF LIMIT LOAD-BEARING CAPABILITY IN CONICAL PART FORMING[J]. , 1997, 33(3): 80-86，1.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1997/V33/I3/80

[1]	CHEN Xin, GONG Yingying, YANG Lifei. GTN Damage Model Considering Anisotropy and Shear Behavior and Application in Forming Limit Prediction [J]. Journal of Mechanical Engineering, 2025, 61(6): 141-150.
[2]	HAN Fei, NING Zihuai. Status of Research and Development Trend of Roll Forming Technology [J]. Journal of Mechanical Engineering, 2025, 61(11): 279-300.
[3]	RONG Hai, YING Liang, HU Ping, HOU Wenbin. Theoretical Prediction and Numerical Simulation Investigation of the Thermal Forming Limit of 7075 Aluminum Alloy Based on Continuum Damage Mechanics [J]. Journal of Mechanical Engineering, 2020, 56(24): 51-60.
[4]	XIE Yanmin, ZHANG Fei, PAN Beibei, FENG Meiqiang, YUE Yaopeng. Optimization of Drawbeads Based on Parallel Infilling Strategy and Kriging Models [J]. Journal of Mechanical Engineering, 2019, 55(8): 73-79.
[5]	YANG Zhuoyun, ZHAO Changcai, DONG Guojiang, CHEN Guang, ZHU Liangjin, DU Bing. Forming Limit Research of 5182 Aluminum Alloy Sheet Based on Lou-2013 Ductile Fracture Criterion [J]. Journal of Mechanical Engineering, 2019, 55(16): 47-57.
[6]	DU Bing, GUAN Fenglong, SONG Pengfei, HAN Zhaojian, ZHANG Xin, ZHAO Changcai. Numerical Simulation Methods of Sheet Metal Wrinkling Instability Problem [J]. Journal of Mechanical Engineering, 2018, 54(24): 42-50.
[7]	KONG Zheng, KONG Ning, ZHANG Jie, LI Hongbo. Mechanical Property of Dual Phase Steel and Its Effect on the Forming Limit [J]. Journal of Mechanical Engineering, 2017, 53(12): 140-146.
[8]	YANG Li, JIN Zhenlin, QIN Siji, ZOU Fenggang, HUANG Yongchao. Modeling and Optimization of Composite and Servo-driven Actuator for Blank-holder Force Control [J]. Journal of Mechanical Engineering, 2015, 51(3): 139-145.
[9]	LIU Yulin;CHEN Wenliang;BAO Yidong;DING Liping. Non-probabilistic Robust Optimization for Polygon Blank Shape Based on Interval Analysis [J]. , 2014, 50(10): 65-71.
[10]	LI Liancheng;LI Yuanting;LI Mingzhe. Comparison on Flexible Blank-drawer and Blank-holder Forming Process for Sheet Metal [J]. , 2013, 49(2): 67-72.
[11]	MA Changhong;YU Zhongqi;CHEN Xinping;CHEN Xianfeng;LIN Zhongqin. Experimental Study on Forming Limit Diagram of Laser Welded Tube Hydroforming [J]. , 2013, 49(2): 49-53.
[12]	PAN Mingcun. Surface Reconstruction and Registration Techniques in Process of Precision Control in 3D Sheet Metal Forming [J]. , 2013, 49(17): 177-181.
[13]	LIANG Jin;HU Hao;TANG Zhengzong;GUO Xiang;LI Leigang. Digital Image Correlation Method for Strains Measurement of Metal Sheet Forming [J]. , 2013, 49(10): 77-83.
[14]	LIU Weijie;HU Ping;ZHOU Ping;ZHANG Xiangkui. Research on Intermediate Configurations of Multi-step Inverse Approach in Sheet Metal Forming [J]. , 2012, 48(4): 21-25.
[15]	LIU Zhiwei;LI Mingzhe;HAN Qigang. Multi-point Forming with Wrinkle Resistance Function and Its Forming Accuracy [J]. , 2012, 48(12): 56-62.

DETERMINATION OF LIMIT LOAD-BEARING CAPABILITY IN CONICAL PART FORMING

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments