TWIN ROLL CASTING OF A SiC PATICULATE-REINFORCED A356 ALUMINIUM MATRIX COMPOSITE

Abstract

Abstract: The SiCp-A356 composite strips of 2～5mm thick were cast by a twin roll caster. The effects of the stirring process, casting speed and strip thickness on the particulate distribution, microstructure and tensile properties of the as-cast strips were investigated. It is shown that both the stirring process and the higher casting speed must be used in order to allow the production of an as-cast structure consisting of a uniform SiC dispersion in the strips, which exhibite good surface appearance and very little edge cracking.

Key words: Composite material, Mechanical property, SiC, Twin roll casting

Pan Fusheng;Zhou Shouze;Liang Xiaoping;D.V.Edmonds. TWIN ROLL CASTING OF A SiC PATICULATE-REINFORCED A356 ALUMINIUM MATRIX COMPOSITE[J]. , 1996, 32(1): 92-96.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1996/V32/I1/92

[1]	LI Haoran, ZHOU Haichao, WANG Guolin, ZHANG Rongyun, ZHAO Chunlai. Road Friction Coefficient and Tire Cornering Characteristics Parameters Estimation Based on PMSM Sensorless Control [J]. Journal of Mechanical Engineering, 2026, 62(8): 196-209.
[2]	YANG Zekun, LI Shaohua, YANG Shaopu. From Reduced Model to Global Intelligence: Multi-physics Coupling, Estimation, and Control of Distributed Drive Electric Vehicles [J]. Journal of Mechanical Engineering, 2026, 62(8): 221-245.
[3]	ZHOU Qiang, LU Honghong, GUO Denggang, CHEN Pengwan, WANG Baoyu. Microstructure and Mechanical Behavior of TA2/TC4 Titanium Alloy Composites Fabricated by Explosion Welding + Rolling [J]. Journal of Mechanical Engineering, 2026, 62(6): 100-110.
[4]	JIA Kangkang, DU Junmin, CHEN Feiyu, SHI Jianwei, HOU Guoyi, LI Cheng. AM-1DCNN Based Automatic Recognition of Mechanical Damage in Composite Material [J]. Journal of Mechanical Engineering, 2026, 62(6): 247-256.
[5]	QI Xiaojing, XIAO Yayue, ZHONG Wei, GAO Bolin, WANG Yong, SUN Dihua, LI Keqiang. Intelligent Vehicle Cyber-physical System Modeling Method Based on Scenario-oriented MBSoSE [J]. Journal of Mechanical Engineering, 2026, 62(6): 267-291.
[6]	LI Lincong, WANG Shengquan, ZENG Xiang, CAI Yong, HE Xiaowei. High-order and Low-order Coupled Simulation Method for Automotive Collision and Development of a Realistic Simulation Platform [J]. Journal of Mechanical Engineering, 2026, 62(6): 314-324.
[7]	QIN Qingyang, TAO Gongquan, WEN Zefeng, REN Yu. Analysis of the Vertical Dynamic Response of the Carbody When the Subway Vehicle Runs on the Bridge [J]. Journal of Mechanical Engineering, 2026, 62(6): 359-369.
[8]	ZHENG Bo, YU Shengfu, YU Zhenyu, MENG Xiaohao. Study on Wire Arc Additive Manufacturing of SiC Aluminum Alloy Composite Gradient Space Exploration Structure [J]. Journal of Mechanical Engineering, 2026, 62(4): 107-117.
[9]	HAN Xinyu, LIU Junsong, SHI Yan. Properties of B₄Cp/Al Composites Prepared by Laser Powder Bed Fusion [J]. Journal of Mechanical Engineering, 2026, 62(4): 224-232.
[10]	WANG Di, WEI Yang, ZHENG Pinzhu, TIAN Yinqian, YANG Yongqian, ZHOU Heng, LI Yanwen, ZHANG Shiqin, HAN Changjun. Study on the Influence of Interlayer Idle Time on the Temperature Field and Deposition Quality of GH3536 Alloy Fabricated by Laser Additive Manufacturing [J]. Journal of Mechanical Engineering, 2026, 62(3): 146-159.
[11]	LUO Zhichao, TANG Qian, SONG Jun, ZHANG Yuanhang, CHEN Junjie, MA Shuai, FENG Qixiang. Design and Anisotropy Analysis of Tetragonal Symmetric TPMS Lattice Structures [J]. Journal of Mechanical Engineering, 2026, 62(1): 347-360.
[12]	WU Jing, ZHOU Kun, JIANG Guiyun, HUANG Yun. Mechanism and Evaluation of Process Performance during Laser-induced Ablation Assisted Belt Grinding of SiC_f/SiC Composites [J]. Journal of Mechanical Engineering, 2026, 62(1): 395-407.
[13]	QIN Lanyun, YUAN Xilian, ZHAO Shuo, YANG Guang, WANG Xiangming. Study on the Effect of Arc Mode on the Interface Microstructure and Mechanical Behavior of Ti / Al Heterogeneous Alloy Direct Additive Manufacturing [J]. Journal of Mechanical Engineering, 2025, 61(9): 199-210.
[14]	LIU Tianyu, XU Shuo, WANG Haolong, ZHAO Hanlei, LI Tiejun, LIU Jinyue. Modeling Method of Mobile Manipulators Considering Flexible Tire-ground Interactions [J]. Journal of Mechanical Engineering, 2025, 61(9): 252-263.
[15]	WANG Chenguang, WANG Haihang, YANG Jie, FAN Zhilei, ZHOU Entao, GE Ende, AN Qinglong, CHEN Ming. The Effect of Expansion Deformation on the Damage of Hole Wall and Fatigue Performance of Carbon Fiber Reinforced Composite Materials [J]. Journal of Mechanical Engineering, 2025, 61(7): 134-143.

TWIN ROLL CASTING OF A SiC PATICULATE-REINFORCED A356 ALUMINIUM MATRIX COMPOSITE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments