SIMULATION OF OPERATING PROCESS OF OPERATING DEVICE FOR ELECTRO-HYDRAULIC OVERHEAD LOADER

Abstract

Abstract: The kinematics and dynamics of operating device for electro-hydraulic overhead loader are analyzed and the mathematical model is established. Then, computer simulation is carried out for the operating device. Based on the results of simulation, a all round discuss is made for the relation between the construction parameters and its effect on the motion of the operating device. Finally, some problems which should be considered in practical design and the solving methods are presented.

Key words: Loader, Operating device, Simulation, autofrettage, Strength, Thermal stresses, Thick-walled cylinder

Cao Jinhai;Ge Mingwen;Kong Dewen. SIMULATION OF OPERATING PROCESS OF OPERATING DEVICE FOR ELECTRO-HYDRAULIC OVERHEAD LOADER[J]. , 1993, 29(5): 80-87.

[1]	WANG Pai, BAI Yifan, ZHAO Wenxiang, ZHANG Yibo, LIU Zhibing. Research on Surface Integrity Evolution of Short Arc Assisted Milling of Superalloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 434-444.
[2]	DONG Zhigang, WANG Zhongwang, RAN Yichuan, BAO Yan, KANG Renke. Advances in Ultrasonic Vibration-assisted Milling of Carbon Fiber Reinforced Ceramic Matrix Composites [J]. Journal of Mechanical Engineering, 2024, 60(9): 26-56.
[3]	WU Jie, DANG Jiaqiang, LI Yugang, CHEN Dong, AN Qinglong, WANG Haowei, CHEN Ming. Study on Strengthening Mechanism and Anti-fatigue Performance of Stress Ultrasonic Rolling [J]. Journal of Mechanical Engineering, 2024, 60(9): 127-136.
[4]	YANG Yang, WANG Zekui, CHEN Chen, MA Hua, YANG Zhinan, ZHANG Fucheng. Effect of Ni and Cu Alloying on Microstructure and Mechanical Properties of Fe-Mn-Al-C Austenitic Lightweight Steel [J]. Journal of Mechanical Engineering, 2024, 60(8): 154-164.
[5]	LI Li, WANG Yixuan, LUO Fen, ZHANG Wentao, ZHAO Wei, LI Xiaoqiang. Effect of Brazing Time on TiAl Joint Brazed with TiH₂-65Ni+TiB₂ Filler [J]. Journal of Mechanical Engineering, 2024, 60(8): 176-185.
[6]	ZOU Xiaolong, YANG Guangxue, ZHANG Bo, LI Guoshun, ZHANG Yichao, CHEN Can, ZHANG Shujun. Study on Dynamic Stress Characteristics of Bogie Frame of High-speed EMU [J]. Journal of Mechanical Engineering, 2024, 60(8): 212-223.
[7]	HAN Jing, ZHANG Zheng, SONG Yuanming, SUN Qisheng, LIU Zhiyuan, SUN Jiapeng, CAO Chao, ZHAO Jiyun. Preparation, Microstructure and Properties of High-performance Gradient Nanostructured Pure Ti Plate by USSR [J]. Journal of Mechanical Engineering, 2024, 60(6): 227-235.
[8]	REN Zhongkai, LI He, XU Yanan, CHENG Qian, FENG Hao, WANG Tao. Constitutive Model and Microstructural Evolution for Tensile Behavior of Carbon Steel Ultrathin Strip under Pulsed Electric Field [J]. Journal of Mechanical Engineering, 2024, 60(6): 245-260.
[9]	WANG Boshi, CHEN Nannan, CAI Yan, WANG Min. Low-temperature Fatigue Ductile-to-brittle Transition Behavior and Mechanism for Simulated Coarse-grained Heat-affected Zone of a High-strength Low-alloy Bainite Steel [J]. Journal of Mechanical Engineering, 2024, 60(6): 271-278.
[10]	CHAI Yiyang, ZHANG Lele, DOU Weiyuan, ZHANG Haifeng. Parallel NSGA-III Based Multi-objective Optimization for Side Wall Section Size of High-speed Train Car-body [J]. Journal of Mechanical Engineering, 2024, 60(6): 321-333.
[11]	YANG Weifeng, LIU Jianhua, Lü Naijing, MA Jiangtao. Method of Cable Dynamic Simulation Based on PBD [J]. Journal of Mechanical Engineering, 2024, 60(6): 21-31,57.
[12]	HUA Dongpeng, ZHOU Qing, WANG Wan, LI Shuo, WANG Zhijun, WANG Haifeng. A Molecular Dynamics Simulation on the Subsurface Damage Mechanism in the Nano-polishing Process of Silicon Carbide [J]. Journal of Mechanical Engineering, 2024, 60(5): 231-240.
[13]	JIA Kang, WANG Hao, REN Dongxu, HONG Jun. An Installation Model and Interference-free Design Method for Cylindrical Power Skiving Tools [J]. Journal of Mechanical Engineering, 2024, 60(5): 352-361.
[14]	ZHAO Chuanjun, WANG Jipeng, XU Lizhong. Research on Accuracy and Localization Characterization of Pulse Electrochemical Micromachining Based on Equivalent Physical Model [J]. Journal of Mechanical Engineering, 2024, 60(5): 378-389.
[15]	CUI Guihan, YANG Chunli. Strengthening and Toughening Mechanism of Weld Metals on GMAW-P of High Strength and High Toughness Welding Wire [J]. Journal of Mechanical Engineering, 2024, 60(4): 326-334.

SIMULATION OF OPERATING PROCESS OF OPERATING DEVICE FOR ELECTRO-HYDRAULIC OVERHEAD LOADER

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments