RESEARCH ON SIMPLE SHEAR TEST AND BAUSCHINGER EFFECT OF SHEET METAL

Abstract

Abstract: Plane shear defemation is an important factor governing the deformation behavior of sheet metal. In this paper, first, the characteristics of a newly-designed testing device for simple sheer deformation in plane are described. Second, according to the test, the stress-strain curves for three kinds of aluminlum sheet metals (LY12M, LF21M, LC4M) are obtained and discussed in connection with the planar anisotropy of material behavior in the-plane simple shear and uniaxial tensile characteristics. Third, Bauschinger effect in simple shear deformation is measured.

Key words: Shear, Sheat metal, Stress-strain curve

Hung Xiaoming;Hu Shiguang. RESEARCH ON SIMPLE SHEAR TEST AND BAUSCHINGER EFFECT OF SHEET METAL[J]. , 1993, 29(4): 103-108.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1993/V29/I4/103

[1]	LI Linguang, JING Zhao, MENG Deqing, REN Mingjun, ZHU Limin, GUO Jiang. Investigation on Non-contact Conformal Polishing of Microlens Array Mold [J]. Journal of Mechanical Engineering, 2026, 62(7): 418-426.
[2]	SHI Yingjie, XU Ke, LEI Tairan, ZHANG Yi. Stress Detection Method for Steel Plates Using Shear Wave Birefringence with Electromagnetic Acoustic Transducer [J]. Journal of Mechanical Engineering, 2026, 62(6): 257-266.
[3]	AN Xiao, WANG Yuanzhi, XIAO Shoune, YANG Bing, YANG Long, YANG Guangwu, ZHU Tao. Study on the Shear and Tensile Mechanical Properties of Q350EWR1 Weathering Steel Plug Welding Joints for Carbody [J]. Journal of Mechanical Engineering, 2026, 62(4): 157-167.
[4]	WANG Shibo, GE Shirong, GUAN Zenglun, ZHOU Shilin, WANG Lijie, LI Xuefeng, WANG Yun, YUAN Xiaoming, MA Guangjun. Research on Real-time Cutting Load of Longwall Shearer Drum for Digital Twins [J]. Journal of Mechanical Engineering, 2026, 62(3): 479-491.
[5]	LIN Yanli, XU Enqi, SU Yibo, QIAN Quan, LI Yuetong, HE Zhubin. Study of Shear Hardening Model Considering Non-uniform Hardening Behavior in Shear Zone [J]. Journal of Mechanical Engineering, 2026, 62(2): 181-194.
[6]	HAN Yuze, LIU Yanpeng, REN Mingfa, ZU Lei, HE Jingxuan. Influence and Optimization of the Process Parameter Coupling of the Gap between Squeezer Rollers on the Properties of Composite Wet Winding Products [J]. Journal of Mechanical Engineering, 2025, 61(5): 354-363.
[7]	MA Yu, WANG Hongjian, MAHAI Wuheri. Effect of Adhesive Thickness on Bonding Strength of the Adhesive Composite Joint [J]. Journal of Mechanical Engineering, 2025, 61(4): 127-136.
[8]	YI Chunxue, LIU Renlin, ZHANG Xu, HUANG Hu, ZHAO Hongwei. Design and Experimental Study of an in-situ Micro/Nano Indentation Testing Device Inside the Scanning Electron Microscope [J]. Journal of Mechanical Engineering, 2025, 61(20): 30-39.
[9]	QIAO Shifan, FENG Chaobo, TAN Junkun, WANG Gang, LI Yang. 2D Numerical Analysis of Cutting Circular Steel Bars with Negative Rake Angle Cutting Tools and Theoretical Calculation of Cutting Force Considering the Influence of Chip Accumulation [J]. Journal of Mechanical Engineering, 2025, 61(13): 461-473.
[10]	LI Li, WANG Yixuan, LUO Fen, ZHANG Wentao, ZHAO Wei, LI Xiaoqiang. Effect of Brazing Time on TiAl Joint Brazed with TiH₂-65Ni+TiB₂ Filler [J]. Journal of Mechanical Engineering, 2024, 60(8): 176-185.
[11]	XIE Chenyang, HUANG Jiao, XIAO Guangming, ZHANG Xianjie, WANG Junbiao, LI Yujun. A Algorithm to Generate Representative Volume Elements for Unidirectional Composites Considering Fiber Misalignment [J]. Journal of Mechanical Engineering, 2024, 60(8): 186-195.
[12]	MA Yixing, YANG Yutao, GUAN Xiaohu, YANG Qi, ZHAO Tongxin. Microstructure and Interfacial Bonding Property of a Hot-roll-bonded TWIP/IF Steel Composite Plate [J]. Journal of Mechanical Engineering, 2024, 60(4): 345-356.
[13]	TIAN Yebing, MA Zhen, QIAN Cheng, AHMAD S, MA Xifeng, YUAN Xiangyu, FAN Zenghua. Material Removal Characteristics and Predictive Models for Magnetorheological Shear Thickening Polishing Method [J]. Journal of Mechanical Engineering, 2024, 60(23): 365-376.
[14]	Lü Zhijun, CHU Ming, ZHOU Yaqin, XIAO Lei, LI Hongliang. A Cognitive Prediction Method of Shear Stiffness of Upright Frames in Z-pattern Based on the Physical Simulation and Data-driven [J]. Journal of Mechanical Engineering, 2024, 60(2): 50-61.
[15]	CHEN Xin, YANG Lifei, YU Xue, GONG Yingying. Review of the Progress and Application on the GTN Meso-damage Model [J]. Journal of Mechanical Engineering, 2024, 60(2): 62-80.

RESEARCH ON SIMPLE SHEAR TEST AND BAUSCHINGER EFFECT OF SHEET METAL

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments