• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (18): 348-369.doi: 10.3901/JME.260531

Previous Articles    

Research on Laser Paint Removal Performance of 7075 Aluminum Alloy and Multi-objective Parameter Optimization Analysis

WANG Wei1,2, LI Xiaopeng1,2, KOU Junyuan1,2, LIU Weijun1,2, ZHONG Jiaxing1,2, WANG Mengkui1,2   

  1. 1. School of Mechanical Engineering, Shenyang University of Technology, Shenyang 110870;
    2. Liaoning Key Laboratory of Laser Surface Engineering Technology, Shenyang 110870
  • Received:2025-12-03 Revised:2026-07-05 Published:2026-11-20

Abstract: In laser cleaning experiments, there are numerous process parameters and their impact on cleaning quality presents a complex contradictory relationship. Therefore, a multi-objective parameter optimization method for laser paint removal on alclad 7075 aluminum alloy is studied to explore in this study. A nanosecond pulse fiber laser is used to remove the paint layer on the surface of alclad 7075 aluminum alloy, and the influence laws of laser average power, laser travel speed, and laser scanning speed on the post-paint-removal surface two-dimensional morphology, surface roughness, wettability, adhesion, and microhardness are investigated. Consequently, targeting three objectives removal depth, surface roughness, and microhardness, regression prediction models including the response surface model and the PSO-BP neural network model are also constructed in this study. Moreover, it is found that the PSO-BP neural network model has higher prediction accuracy through analysis. Combined with the experimental results, a whale optimization algorithm based on particle drive and adaptive threshold is proposed. Furthermore, compared with other mainstream algorithms (seven algorithms including NSGA-II, PSO, DE, etc), the obtained solution set performs better in uniformity, convergence, and diversity. Experimental verification shows that the removal depth is as low as 40.8μm, the surface roughness reaches 0.913 μm, and the microhardness increases to 59.98 HV.

Key words: laser paint removal, predictive models, multi-objective optimization, wettability, adhesion

CLC Number: