• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (17): 482-492.doi: 10.3901/JME.260394

Previous Articles    

Optimization of Single Grinding Head Tile Polishing Trajectory Based on Preston's Equation and NSGA-II Algorithm

HAN Wen1, YANG Zhenheng1, CHU Fulei2, SUI Xudong3, YU Shengrui1, XU Lei1   

  1. 1. School of Mechanical and Electronic Engineering, Jingdezhen Ceramic University, Jingdezhen 333403;
    2. School of Mechanical and Electronic Engineering, Tsinghua University, Beijing 100084;
    3. Keda Industrial Group Co., Ltd, Foshan 528313
  • Received:2025-09-20 Revised:2026-02-25 Published:2026-11-20

Abstract: To address the problems of overthrow and leakage in the continuous production of tile grinding, a single-head grinding trajectory generation method based on Preston’s equation and NSGA-II algorithm is proposed, which can automatically generate a processing trajectory suitable for the size of tiles and good uniformity of grinding according to the set output size. The multi-objective optimization model with the minimum overlap area of the trajectory and the degree of leakage is constructed by using the outer contour equation of the grinding trajectory; the grinding model is constructed by Preston's equation, and the evaluation function to measure the overall uniformity of the grinding trajectory is calculated. The optimization model is solved using NSGA-II with an elite strategy, and the Pareto optimal solution set is computationally screened using an evaluation function to derive the processing parameters that are optimal for the overall uniformity of grinding. Simulation and experimental results demonstrate that, under the same production output, the coefficient of variation for polishing uniformity is significantly reduced from the initial value of 0.5174 to 0.2974 after trajectory optimization. The glossiness distribution range was narrowed from the original 0–73.8 GU to 47.4–74.7 GU, while the average glossiness value increased by 14.88% (baseline: 55.3 GU). The optimized trajectory effectively eliminated unpolished areas and further mitigated over-polishing, thereby enhancing both the efficiency and uniformity of the polishing process for conventional architectural ceramic tiles.

Key words: tile polishing, trajectory generation, Preston equation, NSGA-II algorithm, grinding uniformity

CLC Number: