Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (7): 169-184.doi: 10.3901/JME.260149
Lü Haoming1, ZHANG Zhonghai1,2, LI Duanling3
Received:2025-02-25
Revised:2025-05-14
Published:2026-05-25
CLC Number:
Lü Haoming, ZHANG Zhonghai, LI Duanling. Research Progress and Development Trends of Multi-mode Flapping-wing Drive Mechanisms[J]. Journal of Mechanical Engineering, 2026, 62(7): 169-184.
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
| [1] 陈博怀. 基于GNSS/IMU/UWB融合的扑翼机器人定位技术研究[D]. 南京:东南大学,2023. CHEN Bohuai. Research on positioning technology of flapping wing robots based on GNSS/IMU/UWB fusion[D]. Nanjing:Southeast University,2023. [2] 陈柳辰. 基于多模态信息交互的仿生扑翼机器人控制研究[D]. 南京:东南大学,2023. CHEN Liuchen. Research on bio-inspired flapping-wing robot control based on multi-mode information interaction[D]. Nanjing:Southeast University,2023. [3] 陈星彤. 微型仿生扑翼飞行器的设计与跟踪控制[D]. 杭州:杭州电子科技大学,2023. CHEN Xingtong. Design and tracking control of a bionic flapping-wing micro aerial vehicle[D]. Hangzhou:Hangzhou Dianzi University,2023. [4] 张天和. 基于双层曲柄结构的扑翼机飞行控制器的研究[D]. 长春:吉林大学,2023. ZHANG Tianhe. Research on flight controller of ornithopter based on double crank structure[D]. Changchun:Jilin University,2023. [5] 李珂宇. 仿甲虫飞行时后翅折展的微型扑翼机构研究[D]. 哈尔滨:哈尔滨工业大学,2023. LI Keyu. A micro-bionic flapping-wing mechanism considering the folding of the hind wings during beetle flight[D]. Harbin:Harbin Institute of Technology,2023. [6] 楚镇亚. 仿生扑翼微型飞行器的研制及动力学分析[D]. 长春:吉林大学,2021. CHU Zhenya. Development and dynamic analysis of a bionic flapping wing micro air vehicle[D]. Changchun:Jilin University,2021. [7] GRIGORIOS D. Unsteady aerodynamics:Potential and vortex methods[M]. John Wiley & Sons,Ltd,2023. [8] ETHAN B,MEHDI G,RUI V,et al. Unsteady aerodynamic analysis and effectiveness of bio-inspired flapping wings in V-formation flight[J]. Proceedings of the Institution of Mechanical Engineers,Part G:Journal of Aerospace Engineering,2023,237(2):402-418. [9] LIU C,LI P,SONG F,et al. Design optimization and wind tunnel investigation of a flapping system based on the flapping wing trajectories of a beetle's hindwings[J]. Computers in Biology and Medicine,2022,140:105085-105085. [10] XU J,ZHAO C,ZHANG Y,et al. Effect of flapping trajectories on the dragonfly aerodynamics[J]. Science Bulletin,2006,51(7):777-784. [11] 吉爱红,沈欢,李长龙,等. 昆虫的扑翼轨迹及高升力机理[J]. 南京航空航天大学学报,2018,50(3):289-294. JI Aihong,SHEN Huan,LI Changlong,et al. Flapping wing trajectory and lift mechanism of insects[J]. Journal of Nanjing University of Aeronautics and Astronautics,2018,50(3):289-294. [12] 张红梅,杨文青. 微型扑翼仿生“0”字和“8”字形扑动方式气动特性研究[J]. 航空工程进展,2016,7(1):44-50. ZHANG Hongmei,YANG Wenqing. Investigation of “0”-figure and “8”-figures wingtip path effect on aerodynamic performance of micro flapping-wing[J]. Advances in Aeronautical Science and Engineering,2016,7(1):44-50. [13] XU J,ZHAO C,ZHANG Y,et al. Effect of flapping trajectories on the dragonfly aerodynamics[J]. Science Bulletin,2006,51(7):777-784. [14] 邵伟平,郭梦辉,郝永平. 多段式仿生扑翼飞行器动力学建模与气动特性分析[J]. 机床与液压,2020,48(8):144-148. SHAO Weiping,GUO Menghui,HAO Yongping. Dynamic modeling and aerodynamic characteristics analysis of multi-segment bionic flapping wing aircraft[J]. Machine Tool & Hydraulics,2020,48(8):144-148. [15] 邵伟平,郭梦辉,郝永平,等. 扑翼飞行器气动仿真分析[J]. 兵器装备工程学报,2020,41(1):13-17. SHAO Weiping,GUO Menghui,HAO Yongping,et al. Aerodynamic simulation analysis of flapping wing aircraft[J]. Journal of Ordnance Equipment Engineering,2020,41(1):13-17. [16] 王超,屈方杰,黄恒敬,等. 多自由度仿生扑翼飞行机器人结构设计与分析[J]. 宇航总体技术,2020,4(1):39-46. WANG Chao,QU Fangjie,HUANG Hengjing,et al. Design and analysis of multi-degree of freedom bionic flapping wing flight robot structure[J]. Astronautical Systems Engineering Technology,2020,4(1):39-46. [17] 李京虎,付国强,武斌. 两段式仿生扑翼机构设计及仿真分析[J]. 机床与液压,2020,48(2):144-148. LI Jinghu,FU Guoqiang,WU Bin. Design and simulation analysis of two stage bionic flapping wing mechanism[J]. Machine Tool & Hydraulics,2020,48(2):144-148. [18] RAMEZANI A,SHI X,CHUNG S J,et al. Bat Bot (B2),a biologically inspired flying machine[C]// IEEE International Conference on Robotics & Automation. Stockholm,Sweden:IEEE,2016:3219-3226. [19] 王红超,杜小雷. 一种新型仿鸟扑翼机构[J]. 唐山师范学院学报,2019,41(6):62-67. WANG Hongchao,DU Xiaolei. A new kind of imitation bird flapping wing mechanism[J]. Journal of Tangshan Normal University,2019,41(6):62-67. [20] SHI Y,HE W,GUO M,et al. Mechanism design and motion analysis of a flapping-wing air vehicle[J]. Mathematical Problems in Engineering,2022,2022(1):7920914. [21] 盛典,曾志强,王冠群,等. 两段式扑翼飞行器扑动机构的设计与气动力学分析[J]. 机械传动,2022,46(11):70-76. SHENG Dian,ZENG Zhiqiang,WANG Guanqun,et al. Design and aerodynamic analysis of flapping mechanism of two-stage flapping-wing aircrafts[J]. Journal of Mechanical Transmission,2022,46(11):70-76. [22] 蔡毓,张振鸿,刘斌. 折叠翼飞行器设计与气动仿真分析[J]. 兵器装备工程学报,2022,43(5):266-273. CAI Yu,ZHANG Zhenhong,LIU Bin. Design and aerodynamic simulation analysis of folding wing aerial vehicle[J]. Journal of Ordnance Equipment Engineering,2022,43(5):266-273. [23] WU Y,ZHANG C. Kinematics analysis and simulation of flapping mechanism of two-stage flapping-wing aircraft[J]. Academic Journal of Computing & Information Science,2021,4(6):59-66. [24] SEND W,FISCHER M,JEBENS K,et al. Artificial hinged-wing bird with active torsion and partially linear kinematics[C]// Proceeding of 28th Congress of the International Council of the Aeronautical Sciences. Brisbane,Australia:ICAS,2012:1-10. [25] 张杰,侯宇,尤昶,等. 可折展扑翼飞行器瞬态折展机构设计与运动特性分析[J]. 机械科学与技术,2023(1):1-8. ZHANG Jie,HOU Yu,YOU Chang,et al. Design and kinematics Characteristics of transient folding mechanism for flapping wing aircraft[J]. Mechanical Science and Technology for Aerospace Engineering,2023(1):1-8. [26] 赵卫凯,李文彬,黄灿,等. 三段式扑翼飞行器气动特性的仿真研究[J]. 兵器装备工程学报,2020,41(6):26-31. ZHAO Weikai,LI Wenbin,HUANG Can,et al. Simulation study on aerodynamic characteristics of three-stage flapping wing aircraft[J]. Journal of Ordnance Equipment Engineering,2020,41(6):26-31. [27] 华兆敏,侯宇,朱建阳,等. 三段式扑翼机构设计及气动力特性分析[J]. 计算机仿真,2019,36(5):42-47. HUA Zhaomin,HOU Yu,ZHU Jianyang,et al. Design and aerodynamic analysis of three-stage flapping wing mechanism[J]. Computer Simulation,2019,36(5):42-47. [28] 华兆敏. 适应多姿态的仿生扑翼飞行器动态设计与优化[D]. 武汉:武汉科技大学,2019. HUA Zhaomin. Dynamic design and optimization of bionic flapping-wing aircraft for multi-attitude[D]. Wuhan:Wuhan University of Science and Technology,2019. [29] WANG Z,GAO Z. Three-stage flapping-wing mechanism based on double crank and double rocker[J]. Journal of Physics:Conference Series,2024,2862(1):012016-012016. [30] HAN J,HUI Z,TIAN F,et al. Review on bio-inspired flight systems and bionic aerodynamics[J]. Chinese Journal of Aeronautics,2021,34(7):170-186. [31] YAN S,ZHOU Y,JIANG S,et al. Design and aerodynamic analysis of a flapping mechanism for foldable biomimetic aircraft[J]. Biomimetics,2025,10(1):61-61. [32] 王玉金,胡睿,夏友长,等. 基于RC/RRU并联机构的变迎角扑翼飞行器设计[J]. 机械传动,2023,47(10):139-147. WANG Yujin,HU Rui,XIA Youchang,et al. Design of a flapping aircraft with variable angles of attack based on a RC/RRU parallel mechanism[J]. Journal of Mechanical Transmission,2023,47(10):139-147. [33] 郝永平,李伦,徐九龙,等. 仿生扑翼“0”形轨迹机构的设计及气动力特性[J]. 机器人,2020,42(2):179-190. HAO Yongping,LI Lun,XU Jiulong,et al. Design and aerodynamic characteristics of the “0”-shaped trajectory mechanism of bionic flapping wing[J]. Robot,2020,42(2):179-190. [34] 姜森,郝永平,李伦,等. 基于空间连杆机构实现“8”字形运动的扑翼机的设计[J]. 机床与液压,2019,47(13):76-80. JIANG Sen,HAO Yongping,LI Lun,et al. Design of flapping machine for the “8” zigzag movement based on spatial linkage mechanism[J]. Machine Tool & Hydraulics,2019,47(13):76-80. [35] 朱建阳,蒋林,雷斌. 三维仿生悬停扑翼的时间非对称扑动气动特性[J]. 航空动力学报,2017,32(4):858-864. ZHU Jianyang,JIANG Lin,LEI Bin. Aerodynamic performance of time asymmetric flapping of a three-dimensional flapping hovering bionic wing[J]. Journal of Aerospace Power,2017,32(4):858-864. [36] 阮龙欢,侯宇,李诗雷,等. 两自由度仿生扑翼飞行机器人设计与运动分析[J]. 机械设计与制造,2017(6):241-244. RUAN Longhuan,HOU Yu,LI Shilei,et al. Design and kinematic analysis of a 2-DOF bionic flapping-wing flying robot[J]. Machinery Design & Manufacture,2017(6):241-244. [37] 曹金秋,金晓宏,朱建阳. 6R两自由度空间扑翼机构设计与分析[J]. 机械科学与技术,2018,37(2):206-210. CAO Jinqiu,JIN Xiaohong,ZHU Jianyang. Design and analysis of 6R spatial flapping-wing mechanism with two degrees of freedom[J]. Mechanical Science and Technology for Aerospace Engineering,2018,37(2):206-210. [38] TANG S. Design and analysis of “figure-8” trajectory flapping wing mechanism based on crank rocker[J]. Journal of Engineering Mechanics and Machinery,2022,7(2):48-58. [39] 余海洋. 变攻角扑翼飞行器设计及其控制方法研究[D]. 成都:电子科技大学,2024. YU Haiyang. Design and control method research of variable angle of attack flapping-wing aircraft[D]. Chengdu:University of Electronic Science and Technology of China,2024. [40] 朱名康,朱建阳. 两段式三自由度仿鸟扑翼飞行器机构设计与仿真分析[J]. 武汉科技大学学报,2021,44(3):213-219. ZHU Mingkang,ZHU Jianyang. Design and simulation analysis of two-section 3-DOF bird-inspired flapping wing air vehicles[J]. Journal of Wuhan University of Science and Technology,2021,44(3):213-219. [41] 黄鸣阳,肖天航,昂海松. 多段柔性变体扑翼飞行器设计[J]. 航空动力学报,2016,31(8):1838-1844. HUANG Mingyang,XIAO Tianhang,ANG Haisong. Design of an ornithopter with multisection flexible morphing wings[J]. Journal of Aerospace Power,2016,31(8):1838-1844. [42] 江厚清,侯宇,郭永兴. 单驱动多模式扑翼飞行器设计及耦合动力学研究[J]. 机械传动,2023,47(11):65-72. JIANG Houqing,HOU Yu,GUO Yongxing. Design and coupling dynamics research of a single-drive multi-mode flapping-wing aircraft[J]. Journal of Mechanical Transmission,2023,47(11):65-72. [43] 张瑞坤,何畏,曾小义. 基于空间RCSCR机构的仿生扑翼驱动机构设计与分析[J]. 机械设计与研究,2024,40(4):56-60. ZHANG Ruikun,HE Wei,ZENG Xiaoyi. Design and analysis of bionic flapping wing driving mechanism based on space RCSCR mechanism[J]. Machine Design & Research,2024,40(4):56-60. [44] 朱保利,昂海松,郭力. 一种新型三维仿生扑翼机构设计与分析[J]. 南京航空航天大学学报,2007,39(4):457-460. ZHU Baoli,ANG Haisong,GUO Li. Design and analysis of new 3D insect-like flapping-wing mechanism[J]. Journal of Nanjing University of Aeronautics and Astronautics,2007,39(4):457-460. [45] 从梦磊,李君兰. 基于空间RURS机构的三维仿生扑翼机构设计与分析[J]. 航空动力学报,2019,34(3):692-700. CONG Menglei,LI Junlan. Design and analysis of three-dimensional bio-inspired flapping wing mechanism based on spatial RURS linkage[J]. Journal of Aerospace Power,2019,34(3):692-700. [46] CHELLAPURATH M,NOBLE S,SREEJALEKSHMI K G. Design and kinematic analysis of flapping wing mechanism for common swift inspired micro aerial vehicle[J]. Proceedings of the Institution of Mechanical Engineers,Part C:Journal of Mechanical Engineering Science,2021,235(19):4026-4036. [47] JIANG S,HU Y,LI Q,et al. Design and analysis of an innovative flapping wing micro aerial vehicle with a figure eight wingtip trajectory[J]. Mechanical Sciences,2021,12(1):603-613. [48] 张威,刘新杰,刘艳,等. 带弹性元件扑翼机构的动力学分析及实验[J]. 航空学报,2020,41(9):348-361. ZHANG Wei,LIU Xinjie,LIU Yan,et al. Flapping mechanism with elastic components:Dynamic analysis and experiment[J]. Acta Aeronautica et Astronautica Sinica,2020,41(9):348-361. [49] ZHU B,HUANG Y,ZHANG Y. Energy harvesting properties of a flapping wing with an adaptive Gurney flap[J]. Energy,2018,152:119-128. [50] HE G,SU T,JIA T,et al. Dynamics analysis and control of a bird scale underactuated flapping-wing vehicle[J]. IEEE Transactions on Control Systems Technology,2019,28(4):1-10. [51] ORTEGA-JIMENEZ V M,GREETER J S M,MITTAL R,et al. Hawkmoth flight stability in turbulent vortex streets[J]. Journal of Experimental Biology,2013,216(24):4567-4579. [52] SEELIG J D,JAYARAMAN V. Feature detection and orientation tuning in the Drosophila central complex[J]. Nature,2013,503(7475):262-266. [53] DYHR J P,MORGANSEN K A,DANIEL T L,et al. Flexible strategies for flight control:An active role for the abdomen[J]. The Journal of experimental biology,2013,216(9):1523-1536. [54] VANCE T J,FARUQUE I,HUMBERT S J. Kinematic strategies for mitigating gust perturbations in insects[J]. Bioinspiration & Biomimetics,2013,8(1):016004. [55] XU N,SUN M. Lateral dynamic flight stability of a model bumblebee in hovering and forward flight[J]. Journal of Theoretical Biology,2013,319:102-115. [56] 屠凯,侯宇,华兆敏,等. 柔性空间扑翼机构的刚柔耦合动力特性分析[J]. 机械设计与制造,2019(7):215-219. TU Kai,HOU Yu,HUA Zhaomin,et al. Dynamic analysis of rigid-flexible coupling mechanism of flexible space flapping-wing mechanism[J]. Machinery Design & Manufacture,2019(7):215-219. [57] 侯月阳,侯宇,孙伟,等. 可变幅扑翼飞行器设计及多飞行模式实现[J]. 机械传动,2021,45(5):50-56. HOU Yueyang,HOU Yu,SUN Wei,et al. Design of variable amplitude flapping wing aircraft and realization of multiple flight modes[J]. Journal of Mechanical Transmission,2021,45(5):50-56. [58] 梁金泽,潘天宇,郑孟宗,等. 可变拍幅扑翼飞行器模型设计与气动特性分析[J]. 北京航空航天大学学报,2025,51(5):1735-1746. LIANG Jinze,PAN Tianyu,ZHENG Mengzong,et al. Model design and aerodynamic characteristics analysis of variable-amplitude flapping wing aircraft[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(5):1735-1746. [59] WOOD R,FINIO B,KARPELSON M,et al. Progress on ‘pico' air vehicles[J]. International Journal of Robotics Research,2012,31(11):1292-1302. [60] WANG L,SONG B,SUN Z,et al. Review on ultra-lightweight flapping-wing nano air vehicles:Artificial muscles,flight control mechanism,and biomimetic wings[J]. Chinese Journal of Aeronautics,2023,36(6):63-91. [61] 张弘志,宋笔锋,孙中超,等. 多自由度扑翼驱动机构设计与动力学性能分析[J]. 航空动力学报,2024,39(4):25-35. ZHANG Hongzhi,SONG Bifeng,SUN Zhongchao,et al. Design and dynamic performance analysis of multi-degree-of-freedom flapping wing driving mechanism[J]. Journal of Aerospace Power,2024,39(4):25-35. [62] FINIO B M,WHITNEY J P,WOOD R J. Stroke plane deviation for a microrobotic fly[C]// IEEE/RSJ International Conference on Intelligent Robots & Systems. Taipei,Taiwan,China:IEEE,2010:3378-3385. [63] WANG L,SONG B,SUN Z,et al. Flapping trajectory characteristics and attitude control approach of a flapping-wing robot with 2-DOF parallel mechanism[J]. Aerospace Science and Technology,2024,147:109020. [64] WANG L,ZHANG H,ZHANG L,et al. Analysis and actuation design of a novel at-scale 3-DOF biomimetic flapping-wing mechanism inspired by flying insects[J]. Bioinspiration & Biomimetics,2024,20(1):016015-016015. [65] YU Q,ELRIC Z,ROSHAN P,et al. Dielectric elastomer artificial muscle:Materials innovations and device explorations[J]. Accounts of Chemical Research,2019,52(2):316-325. [66] 陈哲琪,罗英武. 介电弹性体驱动器:从分子、材料到器件[J]. 中国科学:化学,2024,54(11):2183-2198. CHEN Zheqi,LUO Yingwu. Dielectric elastomer actuators:molecules,materials,and devices[J]. Scientia Sinica (Chimica),2024,54(11):2183-2198. [67] 马文涛,王海天,孙文杰,等. 叠层式介电弹性体人工肌肉驱动器:设计、制备与柔性驱动应用[J]. 中国科学:物理学力学天文学,2024,54(6):19-46. MA Wentao,WANG Haitian,SUN Wenjie,et al. Use of a multilayered dielectric elastomer actuator as a high-performance artificial muscle:Design,fabrication,and applications[J]. Scientia Sinica(Physica,Mechanica & Astronomica),2024,54(6):19-46. [68] ZHAO J,NIU J,MCCOUL D,et al. A rotary joint for a flapping wing actuated by dielectric elastomers:Design and experiment[J]. Meccanica,2015,50(11):2815-2824. [69] KHAN Z A,AGRAWAL S K. Biologically inspired design of small flapping wing air vehicles using four-bar mechanisms and quasi-steady aerodynamics[J]. Journal of Mechanical Design,2005,127(4):867-874. [70] MADANGOPAL R,KHAN Z A,AGRAWAL S K. Energetics-based design of small flapping-wing micro air vehicles[J]. IEEE/ASME Transactions on Mechatronics,2006,11(4):433-438. [71] PARK M,VENTIKOS Y,ABOLFATHI A. Should friction losses be included in an electromechanical model of a bioinspired flapping-wing micro aerial vehicle to estimate the flight energetic requirements?[J]. Bioinspiration & Biomimetics,2022,17(3):036011. [72] PAN Y,SU H,GUO S,et al. Analysis and testing of a flyable micro flapping-wing rotor with a highly efficient elastic mechanism[J]. Biomimetics,2024,9(12):737-737. |
| [1] | ZHAN Jiatong, LIU Zhizhong, YE Xiongyue, SHI Yonghua, ZHONG Shaotao. Study on Multi-mode Magnetic Control Power Supply and Weld Sem Formation Optimization Mechanism for K-TIG Backing Welding of 9%Ni Steel [J]. Journal of Mechanical Engineering, 2026, 62(2): 157-169. |
| [2] | GAO Lin, WU Qing, HE Yi. Joint Estimation of Freight Vehicle Mass and Road Slope under Complex Conditions [J]. Journal of Mechanical Engineering, 2025, 61(2): 281-295. |
| [3] | CHENG Tianyi, YU Haitao, CHEN Jian, GONG Wei, GAO Haibo. Design and Deformation Testing of a Closed-chamber Inflatable Soft Robot [J]. Journal of Mechanical Engineering, 2025, 61(11): 23-33. |
| [4] | ZHAO Junlin, QIAO Baijie, LUO Xianqiang, FU Shunguo, CHENG Hao, WANG Yanan, CHEN Xuefeng. Single-sensor-based Prediction of Blade Multimodal Dynamic Stress Field Variation [J]. Journal of Mechanical Engineering, 2024, 60(16): 19-33. |
| [5] | ZHANG He, FAN Zhibin, LI Haiming, BAI Ming, LIU Mengyao, YANG Jiahui, ZHAO Jie. Research Progress and Forward Hotspots of Vitreo-retinal Microsurgical Robot [J]. Journal of Mechanical Engineering, 2023, 59(20): 451-469. |
| [6] | YU Jingjun, LIU Kai, KONG Xianwen. State of the Art of Multi-mode Mechanisms [J]. Journal of Mechanical Engineering, 2020, 56(19): 14-27. |
| [7] | GAO Yicong, ZENG Siyuan, FENG Yixiong, ZHENG Hao, QIU Hao, TAN Jianrong. Review of Design of Programmable Morphing Composite Structures by 4D Printing [J]. Journal of Mechanical Engineering, 2020, 56(15): 26-38. |
| [8] | WU Bin, YANG Jing, JIAO Jingpin, HE Cunfu, QI Gaojun. Study on Ultrasonic Multi-mode Composite Total Focusing Imaging Method for Welds Defect Inspection in Small-diameter Tube of Austenitic Stainless Steel [J]. Journal of Mechanical Engineering, 2020, 56(14): 9-18. |
| [9] | HE Yanying, LI Yezhuo, WU Jianxu, LIU Xingjie, YAO Yanan. Design and Mobility Analysis of a Multi-mode Two-wheel Mobile Robot [J]. Journal of Mechanical Engineering, 2019, 55(23): 83-92. |
| [10] | LIU Chao, CHAO Xindi, YAO Yanan. Multi-mode Spatial 6R Ground Mobile Mechanism [J]. Journal of Mechanical Engineering, 2019, 55(23): 38-47. |
| [11] | ZHANG Lipeng, JIA Qikang, LIU Wei, ZHAO Yuqin. Energy Management of Multi-mode Coupling Drive System Based on Driver Intention Recognition [J]. Journal of Mechanical Engineering, 2019, 55(18): 112-124. |
| [12] | Ruihua Li,Ziyuan Xu,Bo Hu,Ling Pan. Research on Damage Detection of Large Generator Stator Insulation Based on Two-Sided Excitation Guided Wave [J]. Journal of Electrical Engineering, 2016, 11(9): 1-7. |
| [13] | LEI Weijun;CHENG Xiaosheng;DAI Ning;GUO Baosu;LI Xiangjia. Multi-model Machining Path Planning Based on Improved Genetic Algorithm [J]. , 2014, 50(11): 153-160. |
| [14] | LIU Zhifeng;LI Xinyu;ZHANG Hongchao. Research on Design Methods of Products Based on ADSM [J]. , 2009, 45(10): 192-197. |
| [15] | Song Yimin;Yu Yueqing;Zhang Ce;Ma Jinsheng. OPTIMAL CONTROL OF ELASTODYNAMIC RESPONSE OF FLEXIBLE REDUNDANT MANIPULATORS FEATURING SMART MATERIALS [J]. , 2003, 39(1): 123-127. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||
