›› 2001, Vol. 37 ›› Issue (5): 57-59.
• 论文 • 上一篇 下一篇
吴斌;周富强;杨学友;叶声华;盛玉
发布日期:
Wu Bin;Zhou Fuqiang;Yang Xueyou;Ye Shenghua;Sheng Yu
Published:
摘要： 提出了由二维共面靶标自由移动来构建三维特征点集的方法，该方法不需要严格限制标定靶标的移动，因此可以保证摄像机在固定之后进行现场标定，使摄像机的标定状态和工作状态完全一致，降低了标定设备的成本，简化了标定过程，提高了标定效率。试验结果表明，该方法切实可行。
关键词: 三维特征点集, 摄像机标定, 视觉检测
Abstract: A new method to construct a 3D feature set used for camera calibration with 2-D coplanar target is proposed. With-out striation to the moving of the calibration target, all the parameters can be readily calibrated after the camera has been mounted. Therefore, it is guaranteed that the calibration state is identical to the work state of the camera. The proposed approach greatly reduces the cost of calibration equipment and increases the calibrating efficiency. It shows that this method is practical in the vision inspection applications by experiments.
Key words: Camera calibration, Three-dimension feature set, Vision inspection
中图分类号:
TP242 TP301 O432
吴斌;周富强;杨学友;叶声华;盛玉. 用于摄像机标定的三维特征点集构建方法[J]. , 2001, 37(5): 57-59.
Wu Bin;Zhou Fuqiang;Yang Xueyou;Ye Shenghua;Sheng Yu. CONSTRUCTING METHOD OF 3D FEATURE POINT SET USED FOR CAMERA CALIBRATION[J]. , 2001, 37(5): 57-59.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://www.cjmenet.com.cn/CN/
http://www.cjmenet.com.cn/CN/Y2001/V37/I5/57
