[1] 黄新春,张定华,姚倡锋,等.超高强度钢AerMetl00磨削烧伤研究[J]. 机械工程学报, 2015, 5l(9):184-190. HUANG Xinchun, ZHANG Dinghua, YAO Changfeng, et al. Research on the grinding bum of the ultrahigh strength steel AerMetl00[J]. Journal of Mechanical Engineering, 2015, 51(9):184-190.
[2] DAI C, DING W, XU J, et al. Effects of undeformed chip thickness on grinding temperature and bum-out in high-efficiency deep grinding of Inconel718 superalloys[J]. International Joumal of Advanced Manufacturing Technology, 2017, 89(4):184l-1852.
[3] MAMALIS A G, KUNDRÁK J, MANOLAKOS D E, et al. Effect of the workpiece material on the heat affected zones during grinding:A numerical simulation[J]. International Journal of Advanced Manufacturing Technology, 2012, 22(11-12):761-767.
[4] 黄迪. 金属切削区域温度场建模研究[D]. 武汉:华中科技大学, 2014. HUANG Di. Modeling of temperature field in metal cutting region[D]. Wuhan:Huazhong University of Science and Technology, 2014.
[5] 阮宏慧, 张大卫. 热源形貌对超精密磨削热模型影响的研究[J]. 机械设计, 2009, 26(2):32-35. RUAN Honghui, ZHANG Dawei. Study on the influence of heat source morphology on ultra-precision grinding heat model[J]. Mechanical Design, 2009, 26(2):32-35.
[6] LIN B, CHEN S H, ZHANG H L, et al. Application of pitch arc moving heat source model in grinding temperature field of disk workpiece[J]. Key Engineering Materials, 2004, 259(1):249-253.
[7] WEN L K, LIN J F. General temperature rise solution for a moving plane heat source problem in surface grinding[J]. International Journal of Advanced Manufacturing Technology, 2006, 31(3-4):268-277.
[8] MALKIN S, GUO C. Thermal analysis of grinding[J]. CIRP Annals-Manufacturing Technology, 2007, 56(2):760-782.
[9] MAHDI M, ZHANG L. The finite element thermal analysis of grinding processes by ADINA[J]. Computers & Structures, 1995, 56(2-3):313-320.
[10] ROWE W B, BLACK S C E, MILLS B, et al. Experimental investigation of heat transfer in grinding[J]. CIRP Annals-Manufacturing Technology, 1995, 44(1):329-332.
[11] GUO C, WU Y, VARGHESEB V, et al. Temperatures and energy partition for grinding with vitrified CBN wheels[J]. CIRP Annals-Manufacturing Technology, 1999, 48(1):247-250.
[12] FANG C, XU X. Analysis of temperature distributions in surface grinding with intermittent wheels[J]. International Journal of Advanced Manufacturing Technology, 2014, 71(1-4):23-31.
[13] 席辉. 杯形砂轮平面磨削温度场的试验研究及其仿真[D]. 天津:天津大学, 2007. XI Hui. Experimental study and simulation of surface grinding temperature field of cup-shaped grinding wheel[D]. Tianjin:Tianjin University, 2007.
[14] 周德旺. 平面磨削温度场的研究[D]. 长沙:湖南大学, 2008. ZHOU Dewang. Research on surface grinding temperature field[D]. Changsha:Hunan University, 2008.
[15] 毛聪,周志雄,周德旺,等. 平面磨削温度场三维数值仿真的研究[J]. 中国机械工程, 2009, 20(5):589-595. MAO Cong, ZHOU Zhixiong, ZHOU Dewang, et al. Study on 3D numerical simulation of surface grinding temperature field[J]. China Mechanical Engineering, 2009, 20(5):589-595.
[16] CHEN H F, TANG J Y. A model for prediction of surface roughness in ultrasonic-assisted grinding[J]. International Journal of Advanced Manufacturing Technology, 2015, 77:643-651.
[17] DARAFON A, WARKENTIN A, BAUER R. 3D metal removal simulation to determine uncut chip thickness, contact length, and surface finish in grinding[J]. International Journal of Advanced Manufacturing Technology, 2013, 66(9-12):1715-1724.
[18] ROWE W B. Thermal analysis of high efficiency deep grinding[J]. International Journal of Machine Tools & Manufacture, 2001, 41(1):1-19.
[19] 唐进元, 周伟华, 黄于林. 轴向超声振动辅助磨削的磨削力建模[J]. 机械工程学报, 2016, 52(15):184-191. TANG Jinyuan, ZHOU Weihua, HUANG Yulin. Modeling on grinding force assisted with axial ultrasonic vibration[J]. Journal of Mechanical Engineering, 2016, 52(15):184-191.
[20] HE Yuhui, ZHOU Qun, ZHOU Jianjie, et al. Comprehensive modeling approach of axial ultrasonic vibration grinding force[J]. Journal of Central South University, 2016, 23(3):562-569.
[21] JU Y, FARRIS T N, CHANDRASEKAR S. Theoretical analysis of heat partition and temperatures in grinding[J]. Zeitschrift Fü Chemie, 1998, 120(4):215-216.
[22] ROWE W B, BLACK S C E, MILLS B, et al. Grinding temperatures and energy partitioning[J]. Proceedings of the Royal Society A, 1997, 453(1960):1083-1104.
[23] HADAD M, SADEGHI B. Thermal analysis of minimum quantity lubrication-MQL grinding process[J]. International Journal of Machine Tools & Manufacture, 2012, 63(1):1-15.
[24] 马尔金. 磨削技术理论与应用[M]. 沈阳:东北大学出版社, 2002. MA Erjin. Theory and application of grinding technology[M]. Shenyang:Northeastern University Press, 2002. |