[1] 郭琳娜,郑天池,鞠家全,等. 动梁龙门加工中心横梁结构设计与优化[J]. 现代制造工程,2017(6):90-93. GUO Linna,ZHENG Tianchi,JU Jiaquan,et al. Structural design and optimization in the beam of moving beam longmen processing center[J]. Modern Manufacturing Engineering,2017(6):90-93.
[2] 李其龙. XH2130龙门加工中心横梁系统静动热态特性研究[D]. 苏州:苏州大学,2015. LI Qilong. XH2130 Gantry machine crossbeam system static and dynamic and thermal properties research[D]. Suzhou:Soochow University,2015.
[3] HAN G H,GAO B W,SHAO J P,et al. Structural analysis and optimization on crossbeam of heavy NC gantry moving boring & milling machine[C]//Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology,Harbin,Heilongjiang,China,2011:1586-1589.
[4] YANG Q J,LI D N,KONG L L,et al. Research on MFBD modeling method for a gantry machining center beam components[J]. Advanced Materials Research, 2011,188:487-492.
[5] MOEHRIN H C,BRECHER C,ABELE E,et al. Materials in machine tool structures[J]. CIRP Annals-Manufacturing Technology,2015,64(2):725-748.
[6] 郭垒,张辉,叶佩青,等. 基于灵敏度分析的机床轻量化设计[J]. 清华大学学报,2011,51(6):846-850. GUO Lei,ZHANG Hui,YE Peiqing,et al. Light weight design of a machine tool based on sensitivity analysis[J]. J. Tsinghua Univ.,2011,51(6):846-850.
[7] 刘聪颖,殷国富,方辉,等. 基于正交试验的机床结合部动刚度优化配置[J]. 机械工程学报,2015,51(19):146-153. LIU Chongying,YIN Guofu,FANG Hui,et al. Optimal configuration of dynamic stiffness of machine tool joints based on orthogonal experiment[J]. Journal of Mechanical Engineering,2015,51(19):146-153.
[8] LIU S,LI Y,LIAO Y,et al. Structural optimization of the cross-beam of a gantry machine tool based on grey relational analysis[J]. Structural & Multidisciplinary Optimization,2014,50(2):297-311.
[9] 于英华,沈佳兴,阮德灵,等. 泡沫铝填充结构机床工作台结构优化设计[J]. 机械设计,2014(11):52-55. YU Yinghua,SHEN Jiaxing,RUAN Deling,et al. Optimal design of machine tool filled with foam aluminum[J]. Journal of Machine Design,2014(11):52-55.
[10] 徐平,盖巍巍,于英华. 钢纤维树脂混凝土填充结构机床构件静动态性能研究[J]. 制造技术与机床,2011(4):66-68. XU Ping,GAI Weiwei,YU Yinghua. The performance of machine tool component of steel fiber concrete filled structure[J]. Manufacturing Technology & Machine Tool,2011(4):66-68.
[11] 徐平,沈佳兴,于英华,等. 玄武岩纤维树脂混凝土阻尼特性研究[J]. 非金属矿,2017,40(1):30-32. XU Ping,SHEN Jiaxing,YU Yinghua,et al. Study on damping properties of basalt fiber reinforced concrete[J]. Nonmetallic Mines,2017,40(1):30-32.
[12] 徐平,沈佳兴,陈玉明,等. 偶联时间对玄武岩纤维树脂混凝土强度的影响[J]. 非金属矿,2016,39(3):47-49, 80. XU Ping,SHEN Jiaxing,CHEN Yuming,et al. Effect of coupling time on strength of basalt fiber reinforced resin concrete[J]. Non Metallic Mines,2016,39(3):47-49, 80.
[13] 张学玲. 基于广义模块化设计的机械结构静、动态特性分析及优化设计[D]. 天津:天津大学,2001. ZHANG Xueling. Static/dynamic property analysis and optimization design for mechanical structure based on generalized modular design[D]. Tianjin:Tianjin University,2001.
[14] 谭锋. 高速卧式加工中心静动态性能分析与结构优化[D]. 成都:电子科技大学,2015. TAN Feng. The static/dynamic performance analysis and structure optimization of the high speed horizontal machining centers[D]. Chengdu:University of Electronic Science and Technology of China,2015.
[15] 张彬. 铣车复合加工中心整机热特性分析研究[D]. 兰州:兰州理工大学,2014. ZHANG Bin. Analysis and research on thermal characteristics of the milling-turning compound machining center[D]. Lanzhou:Lanzhou University of Technology,2014. |