• CN：11-2187/TH
  • ISSN：0577-6686
机械工程学报

机械工程学报 ›› 2015, Vol. 51 ›› Issue (15): 67-74.doi: 10.3901/JME.2015.15.067

• 机械动力学 • 上一篇    下一篇

基于混合ES-FE-SEA方法的中频声固耦合分析

吴飞， 李光耀， 成艾国， 何智成   

  1. 湖南大学汽车车身先进设计制造国家重点实验室
  • 出版日期:2015-08-05 发布日期:2015-08-05
  • 基金资助:
    国家自然科学基金(61232014)和国家重点基础研究发展计划(973计划，2010CB328005)资助项目

Hybrid ES-FE-SEA Approach for the Analysis of Vibro-acoustic Problems in Mid-frequency Range

WU Fei, LI Guangyao, CHENG Aiguo, HE Zhicheng   

  1. State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University
  • Online:2015-08-05 Published:2015-08-05

PDF

282

摘要： 结构声学的中频预测问题是一直是业界的一个难点和热点。结构声学中频响应复杂，单一确定性的低频方法和统计性的高频方法都不合适中频问题的分析与预测。针对中频结构声学问题，引入基于单元边的梯度光滑技术，软化三维声学系统的刚度，结合统计能量法，构造基于光滑有限元和统计能量法的混合方法(ES-FE-SEA)的理论框架。算例表明，新构造的混合ES-FE-SEA能够在声固耦合系统的频响分析中得到比传统的FE-SEA混合方法更好的精度。

关键词: 边光滑有限元, 混合ES-FE-SEA, 结构声学, 统计能量法, 中频

Abstract: The predictions of the response of the vibro-acoustic problems in mid-frequency regime is one of hotspots and difficulties in academy and engineering. However, there is a broad series of mid-frequency vibro-acoustic problems that are not suited to either deterministic methods or statistic methods, due to the complexity of mixed behaviors in this frequency range. An edge-based smoothing technique is applied in the acoustic FEM model to soften the stiffness of whole system. This edge-based smooth finite element method (ES-FEM) is then embedded to achieve a similar hybrid ES-FE-SEA framework. The higher accuracy of proposed ES-FE-SEA comparing with FE-SEA is verified by various numerical examples.

Key words: edge-based smoothed finite element, ES-FE-SEA, mid-frequency, statistical energy analysis, vibro-acoustic problems

中图分类号: 

版权所有 © 2019 《机械工程学报》编辑部 | 京icp备05055788号-40