基于医工结合的指关节运动学模型建立与验证

doi:10.3901/JME.2024.15.149

机械工程学报 ›› 2024, Vol. 60 ›› Issue (15): 149-159.doi: 10.3901/JME.2024.15.149

扫码分享

基于医工结合的指关节运动学模型建立与验证

于金须^1,2, 闫建华^1,2, 肖俊明³, 李永泉^1,4, 谢平³, 张立杰^1,2

1. 燕山大学先进锻压成形技术与科学教育部重点实验室秦皇岛 066004;
2. 燕山大学河北省重型机械流体动力传输与控制实验室秦皇岛 066004;
3. 燕山大学电气工程学院河北省智能康复及神经调控重点实验室秦皇岛 066004;
4. 燕山大学河北省并联机构与机电系统实验室秦皇岛 066004

收稿日期:2023-09-08 修回日期:2023-12-10 出版日期:2024-08-05 发布日期:2024-09-24
作者简介:于金须，男，1994年出生，博士研究生。主要研究方向为康复机器人。E-mail：yujinxustudy@foxmail.com
张立杰(通信作者)，男，1969年出生，博士，教授。主要研究方向为机器人学、并联机构学、液压测控技术。E-mail：lijiang197879@sina.com
基金资助:
河北省创新能力提升计划(22567619H)和河北省自然科学基金重点(F2022203079)资助项目。

Establishment and Verification of Finger Joint Kinematic Model Based on the Combination of Medicine and Engineering

YU Jinxu^1,2, YAN Jianhua^1,2, XIAO Junming³, LI Yongquan^1,4, XIE Ping³, ZHANG Lijie^1,2

1. Key Laboratory of Advanced Forging & Stamping Technology and Science (Yanshan University), Ministry of Education of China, Qinhuangdao 066004;
2. Hebei Provincial Key Laboratory of Heavy Machinery Fluid Power Transmission and Control, Yanshan University, Qinhuangdao 066004;
3. Key Laboratory of Intelligent Rehabilitation and Neuromodulation of Hebei Province, Institute of Electric Engineering, Yanshan University, Qinhuangdao 066004;
4. Parallel Robot and Mechatronic System Laboratory of Hebei Province, Yanshan University, Qinhuangdao 066004

Received:2023-09-08 Revised:2023-12-10 Online:2024-08-05 Published:2024-09-24

摘要/Abstract

摘要： 手部外骨骼机构是进行手部康复训练的主要选择之一，其舒适性和安全性主要取决于是否符合人体指关节运动学特征。为了建立准确的指关节运动学模型，首先通过采集手指屈伸过程的医学影像，分析关节运动过程中指骨的接触方式，确定了在关节转动时两指骨的相对运动为滚动与滑动叠加的混合运动，进而证明了指关节运动为非定中心转动。然后，提出“瞬径法”计算连续瞬心轨迹，并通过极坐标变换获取了手指各关节连续瞬心轨迹曲线，并通过能够适应指关节瞬心变化的角度采集设备获取了关节角度变化规律，建立了指关节关联性映射，并分析了关节角度和角速度特征。最后，利用等效瞬心将指关节运动学模型与工程应用相对接，设计了能够定位指关节等效瞬心的跨越式转动副，并将其加装在手部外骨骼机构上进行运动学测试和人机相容性测试，结果表明符合指关节运动学特征的外骨骼机构能够更好地拟合手指生理运动轨迹，在辅助过程中对各指段的压力也更低，证明了模型的有效性。

关键词: 指关节运动学模型, 手部外骨骼机构, 关节转动瞬心, 关节角度, 人机相容性

Abstract: Hand exoskeletons are one of the primary choices for hand rehabilitation training, and their comfort and safety largely depend on their adherence to human finger joint kinematics. In order to establish an accurate finger joint kinematic model, medical images of the finger flexion and extension process are first collected. The analysis of joint motion during the process identified how the finger bones make contact and demonstrated that during joint rotation, the motion of the two finger bones involves both rolling and sliding, thereby proving that finger joint motion is non-fixed center rotation. Next, the “instantaneous center radius method” is proposed to calculate continuous instantaneous center trajectories. Through polar coordinate transformation, continuous instantaneous center trajectory curves for each finger joint are obtained. By using angle acquisition devices that can adapt to changes in the instantaneous center of finger joints, the patterns of joint angle changes are captured. This led to the establishment of a correlation mapping of finger joint movements and an analysis of joint angle and angular velocity characteristics. Finally, by employing equivalent instantaneous centers, the finger joint kinematic model is integrated with engineering applications. A straddle rotating pair that can locate the equivalent instantaneous centers of finger joints is designed and installed on the hand exoskeleton mechanism for kinematic testing and human-machine compatibility testing. The results show that exoskeleton mechanisms conforming to finger joint kinematic characteristics can better replicate the physiological finger movement trajectory, and they apply lower pressure on different segments of the fingers during assistance, thus confirming the effectiveness of the model.

Key words: finger joint kinematic modeling, hand exoskeleton mechanism, joint rotation instantaneous centers, joint angles, human-machine compatibility

中图分类号:

TH112

于金须, 闫建华, 肖俊明, 李永泉, 谢平, 张立杰. 基于医工结合的指关节运动学模型建立与验证[J]. 机械工程学报, 2024, 60(15): 149-159.

YU Jinxu, YAN Jianhua, XIAO Junming, LI Yongquan, XIE Ping, ZHANG Lijie. Establishment and Verification of Finger Joint Kinematic Model Based on the Combination of Medicine and Engineering[J]. Journal of Mechanical Engineering, 2024, 60(15): 149-159.

参考文献

[1] LIU C，LU J，YANG H，et al.Current state of robotics in hand rehabilitation after stroke:A systematic review[J].Applied Sciences，2022，12(9):4540.
[2] LI Y，GAO X，LIAO B，et al.Research progress of exoskeleton for hand rehabilitation following stroke[J].Journal of Physics:Conference Series，2021，1820(1):012076.
[3] 张立杰，于金须，闫建华，等.基于人机共融的外骨骼机构构型综合及优选方法[J].机械工程学报，2022，58(11):37-45.ZHANG Lijie，YU Jinxu，YAN Jianhua，et al.Synthesis and optimization method of exoskeleton mechanism based on human-machine fusion[J].Journal of Mechanical Engineering，2022，58(11):37-45
[4] 李剑锋，张兆晶，张雷雨，等.手部外骨骼运动相容性设计综述[J].上海交通大学学报，2018，52(6):729-742.LI Jianfeng，ZHANG Zhaojing，ZHANG Leiyu，et al.Review of the kinematic compatibility design of hand exoskeletons[J].Journal of Shanghai Jiaotong University，2018，52(6):729-742.
[5] THOMPSON D E，BUFORD W L，MYERS L M，et al.A hand biomechanics workstation[J].ACM SIGGRAPH Computer Graphics，1988，22(4):335-343.
[6] JOHANSON M E，SKINNER S R，LAMOREUX L W，et al.Phasic relationships of the extrinsic muscles of the normal hand[J].The Journal of Hand Surgery，1990，15(4):587-594.
[7] RASH G S，BELLIAPPA P P，WACHOWIAK M P，et al.A demonstration of the validity of a 3-D video motion analysis method for measuring finger flexion and extension[J].Journal of Biomechanics，1999，32(12):1337-1341.
[8] COUPIER J，HAMOUDI S，TELESE-IZZI S，et al.A novel method for in-vivo evaluation of finger kinematics including definition of healthy motion patterns[J].Clinical Biomechanics，2016，31:47-58.
[9] 康永强.2-5掌指关节屈伸活动中有效关节接触面积的三维可视化研究[D].苏州:苏州大学，2017.KANG Yongqiang.The 3D visualization study evaluating contact areas of the 2-5 metacarpophalangeal joint during flexion[D].Soochow:Soochow University，2017.
[10] YANG J，XIE H，SHI J.A novel motion-coupling design for a jointless tendon-driven finger exoskeleton for rehabilitation[J].Mechanism and Machine Theory，2016，99:83-102.
[11] LIANG R，XU G，TENG Z，et al.A general arthropod joint model and its applications in modeling human robotic joints[J].IEEE Access，2021，9:7814-7822.
[12] PARK C B，PARK H S.Portable 3D-printed hand orthosis with spatial stiffness distribution personalized for assisting grasping in daily living[J].Frontiers in Bioengineering and Biotechnology，2023，11:895745.
[13] PEPERONI E，CAPITANI S L，FIUMALBI T，et al.Self-aligning finger exoskeleton for the mobilization of the metacarpophalangeal joint[J].IEEE Transactions on Neural Systems and Rehabilitation Engineering，2023，31:884-894.
[14] HAARMAN C J W，HEKMAN E E G，RIETMAN J S，et al.Mechanical design and feasibility of a finger exoskeleton to support finger extension of severely affected stroke patients[J].IEEE Transactions on Neural Systems and Rehabilitation Engineering，2023，31:1268-1276.
[15] BARTALUCCI L，SECCIANI N，BROGI C，et al.An original mechatronic design of a kinaesthetic hand exoskeleton for virtual reality-based applications[J].Mechatronics，2023，90:102947.
[16] ZHANG H.Design，modeling，and characteristic analysis of an index finger exoskeleton for rehabilitation[J].Journal of Physics:Conference Series，2022，2405(1):012012.
[17] 张雷雨，李剑锋，刘钧辉，等.上肢康复外骨骼的设计与人机相容性分析[J].机械工程学报，2018，54(5):19-28.ZHANG Leiyu，LI Jianfeng，LIU Junhui，et al.Design and human-machine compatibility analysis of co-exos for upper-limb rehabilitation[J].Journal of Mechanical Engineering，2018，54(5):19-28.
[18] MÜLLER-GERBL M，PUTZ R，HODAPP N，et al.Die darstellung der subchondralen dichtemuster mittels der ct-osteoabsorptiometrie (CT-OAM) zur beurteilung der individuellen gelenkbeanspruchung am lebenden[J].Zeitschrift für Orthopädie und ihre Grenzgebiete，2008，128(2):128-133.
[19] VALENTIN J.Managing patient dose in multi-detector computed tomography (MDCT)[M].New York:Elsevier，2007.
[20] SALTYBAEVA N，JAFARI M E，HUPFER M，et al.Estimates of effective dose for ct scans of the lower extremities[J].Radiology，2014，273(1):153-159.
[21] HUDA W，OGDEN K M，KHORASANI M R.Converting dose-length product to effective dose at CT[J].Radiology，2008，248(3):995-1003.
[22] 李亮，魏立友，王国强，等.小夹板与高分子石膏固定治疗桡骨远端骨折的疗效比较[J].中国骨与关节损伤杂志，2022，37(1):88-90. LI Liang，WEI Liyou，WANG Guoqiang，et al.Comparison of the efficacy of small splint and polymer plaster immobilization in the treatment of distal radius fracture[J].Chinese Journal of Bone and Joint Injury，2022，37(1):88-90.
[23] 魏明杰.应用Mimics软件构建钩骨3D可视化解剖学研究[D].昆明:昆明医科大学，2021.WEI Mingjie.Application of MIMICS software to construct 3d visualization anatomy of hook bone[D].Kunming:Kunming Medical University，2021.
[24] 李江涛.Mimics软件三维重建结合快速成形技术在骨折治疗中的探索[D].石家庄:河北医科大学，2014. LI Jiangtao.Exploration of MIMICS software 3D reconstruction combined with rapid prototyping in fracture treatment[D].Shijiazhuang:Hebei Medical University，2014.
[25] SOMAN S，ANBURAJAN M.Finite element analysis of fractured finger with implant fixation using MIMICS[C]//20113rd International Conference on Electronics Computer Technology.Kanyakumari，India:IEEE，2011:380-385.
[26] ZURL B，TIEFLING R，WINKLER P，et al.Hounsfield units variations:Impact on CT-density based conversion tables and their effects on dose distribution[J].Strahlentherapie und Onkologie，2014，190(1):88-93.
[27] HESS F，FÜRNSTAHL P，GALLO L M，et al.3D analysis of the proximal interphalangeal joint kinematics during flexion[J].Computational and Mathematical Methods in Medicine，2013，2013:e138063.
[28] VAN SINT JAN S，GIURINTANO D J，THOMPSON D E，et al.Joint kinematics simulation from medical imaging data[J].IEEE Transactions on Biomedical Engineering，1997，44(12):1175-1184.
[29] YANG X，LIM Z，JUNG H，et al.Estimation of finite finger joint centers of rotation using 3D hand skeleton motions reconstructed from CT scans[J].Applied Sciences，2020，10(24):9129.
[30] FIGUEROA R，ARMSTRONG T J，WOOLLEY C，et al.Determining instantaneous centers of rotation for finger joints through different postures using the iterative closest point algorithm (ICP)[J].Proceedings of the Human Factors and Ergonomics Society Annual Meeting，2016，60(1):1470-1474.
[31] 沈乃勋，吕恬生，朱香亭，等.用解析法求取膝关节运动时的瞬心轨迹[J].中国生物医学工程学报，1986(1):61-66.SHEN Naixun，LÜ Tiansheng，ZHU Xiangting，et al.An analytical method to find the instantaneous center trajectory of the knee joint during motion[J].Chinese Journal of Biomedical Engineering，1986(1):61-66.

基于医工结合的指关节运动学模型建立与验证

Establishment and Verification of Finger Joint Kinematic Model Based on the Combination of Medicine and Engineering

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价

[1]	申慧敏, 葛瑞康, 葛迪, 李炳初, 甘屹, 秦龙辉, 杨赓. 基于肩部协同运动特征的康复外骨骼设计与人机相容性分析[J]. 机械工程学报, 2022, 58(19): 34-44.
[2]	张雷雨, 李剑锋, 刘钧辉, 侯增广, 彭亮, 王卫群. 上肢康复外骨骼的设计与人机相容性分析[J]. 机械工程学报, 2018, 54(5): 19-28.
[3]	李剑锋, 刘钧辉, 张雷雨, 陶春静, 季润, 赵朋波. 人机相容型肩关节康复外骨骼机构的运动学与灵活性分析[J]. 机械工程学报, 2018, 54(3): 46-54.