TIG电弧辅助熔滴沉积增材制造中熔滴偏距对熔池形貌的影响机制研究

doi:10.3901/JME.2024.05.219

机械工程学报 ›› 2024, Vol. 60 ›› Issue (5): 219-230.doi: 10.3901/JME.2024.05.219

扫码分享

TIG电弧辅助熔滴沉积增材制造中熔滴偏距对熔池形貌的影响机制研究

杜军^1,2, 王谦元², 何冀淼², 张永恒², 魏正英²

1. 宁夏大学材料与新能源学院银川 750021;
2. 西安交通大学机械制造系统工程国家重点实验室西安 710049

收稿日期:2023-04-02 修回日期:2023-09-24 出版日期:2024-03-05 发布日期:2024-05-30
通讯作者: 杜军，男，1978年出生，博士，副教授，硕士研究生导师。主要研究方向为多材料增材制造相关方法理论与应用研究。E-mailsiyao815@gmail.com
基金资助:
国家自然科学基金(51775420)、航空科学基金(20200054070001)、浙江省自然科学基金(LQZ1E010004)、宁波市自然科学基金(202003N4071)和民用航空预研(D020208)资助项目。

Influence of the Offset Distance between Droplet and Molten Pool on the Molten Pool Morphology in TIG-assisted Droplet Deposition Manufacturing

DU Jun^1,2, WANG Qianyuan², HE Jimiao², ZHANG Yongheng², WEI Zhengying²

1. School of Materials and New Energy, Ningxia University, Yinchuan 750021;
2. The State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049

Received:2023-04-02 Revised:2023-09-24 Online:2024-03-05 Published:2024-05-30

摘要/Abstract

摘要： 针对传统d属熔滴微喷沉积成形中气孔、冷叠等冶金缺陷难抑制的问题，提出一种TIG电弧辅助熔滴沉积增材制造新方法。基于计算流体力学方法，建立铝合金TIG电弧辅助熔滴沉积增材制造过程三维瞬态熔池行为数值模型，对比研究了3组不同熔滴偏距下的熔池行为，通过与堆积层特征尺寸(层高、层宽、熔深)实测值相比较，验证所建熔池行为数值模型的有效性，澄清了单层单道堆积成形中熔滴偏距对熔池热流场和堆积层形貌的影响规律。结果表明：随着熔滴偏距的增加，熔滴与TIG电弧熔池一侧基板表面的接触面积增加，熔池与基板之间的散热效率得到提高，熔池凝固前沿的对称性被打破，进而导致熔滴冲击诱导的熔池热流场与堆积层形貌呈现明显的非对称特征。研究结论可为TIG电弧辅助熔滴沉积增材制造增材技术的工艺参数调控提供理论支撑和依据。

关键词: 增材制造, TIG电弧, 熔滴沉积, 熔池行为, 堆积层形貌

Abstract: To eliminate metallurgical defects such as porosity and cold lap in the formed parts fabricated by metal droplets deposition manufacturing technology, a novel droplet-based additive manufacturing method, called TIG-assisted droplet deposition manufacturing, for producing three-dimensional metal components is presented. A numerical model based on the computational fluid dynamics (CFD) method is developed to comparatively investigate the effect of the offset distance between the impacting point of droplet and the longitudinal plane of molten pool on the deposition morphology and the impact-induced molten pool behaviors. The numerical model is validated with corresponding experiments for three different lateral offset distances. The results indicated that as the lateral offset distance increases, the amount of liquid metal that contacts with the cooler substrate or the asymmetric pre-solidified bead increased, which leads to exposing more contact area for heat dissipation. Consequently, the symmetry of solidification front morphologies will be broken, an obvious increase of the asymmetry in the thermal-flow fields within the droplet impact-induced molten pool and deposition geometry was observed. The results of this paper can provide theoretical support and basis for the process parameters’ controlling and adjusting of TIG-assisted droplet deposition manufacturing.

Key words: additive manufacturing, TIG welding arc, droplet deposition, molten pool behavior, deposition morphology

中图分类号:

TG456

杜军, 王谦元, 何冀淼, 张永恒, 魏正英. TIG电弧辅助熔滴沉积增材制造中熔滴偏距对熔池形貌的影响机制研究[J]. 机械工程学报, 2024, 60(5): 219-230.

DU Jun, WANG Qianyuan, HE Jimiao, ZHANG Yongheng, WEI Zhengying. Influence of the Offset Distance between Droplet and Molten Pool on the Molten Pool Morphology in TIG-assisted Droplet Deposition Manufacturing[J]. Journal of Mechanical Engineering, 2024, 60(5): 219-230.

参考文献

[1] SIMONELLI M，ABOULKHAIR N，RASA M，et al. Towards digital metal additive manufacturing via high-temperature drop-on-demand jetting[J]. Additive Manufacturing，2019，30： 100930.
[2] MURR L E，JOHNSON W L. 3D metal droplet printing development and advanced materials additive manufacturing[J]. Journal of Materials Research and Technology，2017，6(1)：77-89.
[3] ZUO H，LI H，QI L，et al. Influence of interfacial bonding between metal droplets on tensile properties of 7075 aluminum billets by additive manufacturing technique[J]. Journal of Materials Science & Technology，2016，32(5)：485-488.
[4] YI H，QI L，LUO J，et al. Effect of the surface morphology of solidified droplet on remelting between neighboring aluminum droplets[J]. International Journal of Machine Tools and Manufacture，2018，130-131：1-11.
[5] WEI H L，MUKHERJEE T，ZHANG W，et al. Mechanistic models for additive manufacturing of metallic components[J]. Progress in Materials Science，2021，116：100703.
[6] BOUABBOU A，VAUDREUIL S. Understanding laser-metal interaction in selective laser melting additive manufacturing through numerical modelling and simulation：A review[J]. Virtual and Physical Prototyping，2022，17(3)：543-562.
[7] SONG B，YU T，JIANG X，et al. The relationship between convection mechanism and solidification structure of the iron-based molten pool in metal laser direct deposition[J]. International Journal of Mechanical Sciences，2020，165：105207.
[8] OU W，KNAPP G L，MUKHERJEE T，et al. An improved heat transfer and fluid flow model of wire-arc additive manufacturing[J]. International Journal of Heat and Mass Transfer，2021，167：120835.
[9] RIOS S，COLEGROVE P A，MARTINA F，et al. Analytical process model for wire + arc additive manufacturing[J]. Additive Manufacturing，2018，21：651-657.
[10] AZIZ S D，CHANDRA S. Impact，recoil and splashing of molten metal droplets[J]. International Journal of Heat and Mass Transfer，2000，43(16)：2841-2857.
[11] KAMNIS S，GU S. Numerical modelling of droplet impingement[J]. Journal of Physics D：Applied Physics，2005，38：3664-3673.
[12] GIELEN M V，RUITER R D，KOLDEWEIJ R B J，et al. Solidification of liquid metal drops during impact[J]. Journal of Fluid Mechanics，2020，883：A32
[13] DOU Y，LUO J，QI L，et al. Generation mechanism and suppression method of landing error of two successively deposited metal droplets caused by coalescence and solidification[J]. International Journal of Heat and Mass Transfer，2021，172：121100.
[14] 徐秉声，吴湖，韩琳，等. 熔融Sn-3.0Ag-0.5Cu在倾斜铜基板上表面形貌的模拟[J]. 有色金属科学与工程，2014，5(4)：7-12. XU Bingsheng，WU Hu，HAN Lin，et al. Simulation analysis on the surface morphology of Sn-3.0Ag-0.5Cu melting on the inclined Cu substrate[J]. Nonferrous Metals Science and Engineering，2014，5(4)：7-12.
[15] 王锡武山. 超声波作用下锡滴撞击不同金属表面的铺展及润湿行为[D]. 兰州：兰州理工大学，2022. WANG Xiwushan. Spreading and wetting behavior of tin droplets impacting different metal surfaces under ultrasonic action[D]. Lanzhou：Lanzhou University of Technology，2022.
[16] HUANG J，QI L，LUO J，et al. Insights into the impact and solidification of metal droplets in ground-based investigation of droplet deposition 3D printing under microgravity[J]. Applied Thermal Engineering，2021，183：116176.
[17] XU Z G，QI H C，WANG T Y，et al. Coalescence delay mediated by the gas layer during the impact of hot droplets[J]. International Journal of Heat and Mass Transfer，2023，204：123864.
[18] WU D，TASHIRO S，WU Z，et al. Analysis of heat transfer and material flow in hybrid KPAW-GMAW process based on the novel three dimensional CFD simulation[J]. International Journal of Heat and Mass Transfer，2020，147：118921.
[19] CHO D W，NA S J，CHO M H，et al. A study on V-groove GMAW for various welding positions[J]. Journal of Materials Processing Technology，2013，9：1640-1652.
[20] KOU S，SUN D. Fluid flow and weld penetration in stationary arc welds[J]. Metallurgical and Materials Transactions A，1985，16(2)：203-213.
[21] SREEDHAR U. Static GTAW：Experimental and numerical investigations and heat ﬂux parameter estimation[D]. Montpellier：Universitxe Montpellier-II， France，2014.
[22] LIN M，EAGAR T. Pressures produced by gas tungsten arcs[J]. Metallurgical and Materials Transactions B，1986，17：601-607.
[23] NASIRI M B，BEHZADINEJAD M，LATIFI H，et al. Investigation on the influence of various welding parameters on the arc thermal efficiency of the GTAW process by calorimetric method[J]. Journal of Mechanical Science and Technology，2014，28：3255-3261.<

TIG电弧辅助熔滴沉积增材制造中熔滴偏距对熔池形貌的影响机制研究

Influence of the Offset Distance between Droplet and Molten Pool on the Molten Pool Morphology in TIG-assisted Droplet Deposition Manufacturing

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张云舒, 吴斌涛, 赵昀, 丁东红, 潘增喜, 李会军. 电弧熔丝增材制造传热传质数值模拟研究现状与展望[J]. 机械工程学报, 2024, 60(8): 65-80.
[2]	李坤, 吉辰, 白生文, 蒋斌, 潘复生. 高性能镁合金电弧增材制造技术研究现状与展望[J]. 机械工程学报, 2024, 60(7): 289-311.
[3]	陈伟, 赵杰, 朱利斌, 曹海波. 增材制造低活化钢研究现状及展望[J]. 机械工程学报, 2024, 60(7): 312-333.
[4]	杜文博, 李晓亮, 李霞, 胡深恒, 朱胜. 搅拌摩擦沉积增材技术研究现状[J]. 机械工程学报, 2024, 60(7): 374-384.
[5]	郑洋, 赵梓昊, 刘伟, 余政哲, 牛伟, 雷贻文, 孙荣禄. 高性能镁合金增材制造技术研究进展[J]. 机械工程学报, 2024, 60(7): 385-400.
[6]	蒋周明矩, 熊异, 王柏村. 面向工业5.0的人机协作增材制造[J]. 机械工程学报, 2024, 60(3): 238-253.
[7]	石毅磊, 权银洙, 许海鹰, 王壮, 马文龙, 彭勇. 丝束同轴冷阴极电子枪电子束注腰位置影响因素分析[J]. 机械工程学报, 2024, 60(3): 328-336.
[8]	荣鹏, 成靖, 邓鸿文, 陶常安, 高川云, 冉先喆, 程序, 汤海波, 刘栋. 不同热处理对激光定向能量沉积制造TC4钛合金组织和拉伸性能的影响[J]. 机械工程学报, 2024, 60(20): 99-107.
[9]	夏令伟, 谢亿民, 马国伟. 3D打印制造约束下的多孔结构与路径协同优化方法[J]. 机械工程学报, 2024, 60(19): 241-249.
[10]	张明康, 师文庆, 徐梅珍, 王迪, 陈杰. 隐式曲面多孔结构压缩性能与流体压降性能研究[J]. 机械工程学报, 2024, 60(18): 394-406.
[11]	黄金杰, 赵欣. 3D打印中的分层计算研究进展[J]. 机械工程学报, 2024, 60(17): 235-262.
[12]	喻康, 傅建中, 贺永. 面向软组织缺损修复的组织工程支架研究进展[J]. 机械工程学报, 2024, 60(15): 255-271.
[13]	张立浩, 钱波, 茅健, 樊红日, 张朝瑞, 李旭鹏. 基于增材制造的“猫耳形”气膜孔冷却性能研究[J]. 机械工程学报, 2024, 60(15): 334-345.
[14]	肖锋, 刘佳, 石岩. 基于增材制造的激光焊接保护喷嘴设计[J]. 机械工程学报, 2024, 60(14): 185-193.
[15]	宗子凯, 肖蜜, 周冕, 沙伟, 高亮. 考虑局部过热约束的自支撑结构等几何拓扑优化[J]. 机械工程学报, 2024, 60(11): 41-52.