大型锻件应力场分析计算的新方法及应用

doi:10.3901/JME.2023.14.106

机械工程学报 ›› 2023, Vol. 59 ›› Issue (14): 106-115.doi: 10.3901/JME.2023.14.106

扫码分享

大型锻件应力场分析计算的新方法及应用

任杰^1,2, 葛苏³, 郭宝峰¹, 金淼¹

1. 先进锻压成形技术与科学教育部重点实验室(燕山大学) 秦皇岛 066004;
2. 上海电机学院高职学院上海 200240;
3. 上海第二工业大学智能制造与控制工程学院上海 201209

收稿日期:2022-09-19 修回日期:2023-03-30 出版日期:2023-07-20 发布日期:2023-08-16
通讯作者: 葛苏(通信作者),女,1985年出生,硕士,讲师。主要从事金属塑性成形理论及工艺研究。E-mail:gesu@sspu.edu.cn
作者简介:任杰,男,1983年出生,博士研究生。主要从事金属塑性成形理论及工艺研究。E-mail:renj@sdju.edu.cn
基金资助:
国家科技重大专项(2012ZX04010082)、高技术船舶科研和上海多向模锻工程技术研究中心(20DZ2253200)资助项目。

New Method and Application of Stress Field Calculation for Large Forgings

REN Jie^1,2, GE Su³, GUO Baofeng¹, JIN Miao¹

1. Key Laboratory of Advanced Forging & Stamping Technology and Science, Ministry of Education of China, Yanshan University, Qinhuangdao 066004;
2. College of Vocational Education, Shanghai Dianji University, Shanghai 200240;
3. School of Intelligent Manufacturing and Control Engineering, Shanghai Polytechnic University, Shanghai 201209

Received:2022-09-19 Revised:2023-03-30 Online:2023-07-20 Published:2023-08-16

摘要/Abstract

摘要： 大型锻件是高端装备制造业的基础，锻造生产过程中，准确掌握坯料内部应力场分布是十分必要的。大型锻件的锻造变形接近于理想刚塑性材料的变形模型，缺少应力球张量与变形球张量的关系，计算其内部应力场的方法，只能按应力求解。针对计算大型锻件内部应力场中所遇到的理论和方法两方面的困难，在提出静力平衡应力场概念的基础上，建立了刚塑性材料扩展的第二变分原理，并给出了详细证明。应用此变分原理计算应力场，由于预设静力平衡应力场容易，不仅便于解析计算分析，而且也便于刚塑性有限元法的加载。采用该变分原理求解了DSF法锻造中锻件内部的应力场，计算结果给出了DSF法锻造的工艺规律，为防止和消除大型锻件内部缺陷提供了理论依据。算例的求解过程体现了刚塑性材料扩展的第二变分原理在解析计算应力场中的优越性。

关键词: 大型锻件, 内部应力场, 刚-塑性材料, 变分原理, DSF法锻造

Abstract: Large forgings are the basis of high-end equipment manufacturing industry.In the forging process, it is necessary to accurately grasp the distribution of stress field inside the blank. The forging deformation of large forgings is close to the theoretical ideal rigid-plastic material deformation model, and the relationship between the stress sphere tensor and the deformation sphere tensor is lacking. The method of calculating the internal stress field can only be solved according to the stress. In view of the theoretical and methodological difficulties in calculating the internal stress field of large forgings, based on the concept of static equilibrium stress field, the expansion second variational principle of rigid-plastic material is established and proved in detail. Applying this variational principle to calculate the stress field, due to the ease of preset static equilibrium stress field, it is not only convenient for analytical calculation and analysis, but also for loading of rigid plastic finite element method. This variational principle is used to solve the stress field inside the forging in DSF forging, and the calculation results give the technological rules in DSF forging, which provides a theoretical basis for preventing and eliminating the internal defects of large forgings.The solving process of the example reflects the superiority of the expansion second variational principle of rigid-plastic material in the analytical calculation of stress fields.

Key words: large forging, internal stress field, rigid-plastic material, variational principle, DSF forging

中图分类号:

TG316

任杰, 葛苏, 郭宝峰, 金淼. 大型锻件应力场分析计算的新方法及应用[J]. 机械工程学报, 2023, 59(14): 106-115.

REN Jie, GE Su, GUO Baofeng, JIN Miao. New Method and Application of Stress Field Calculation for Large Forgings[J]. Journal of Mechanical Engineering, 2023, 59(14): 106-115.

参考文献

[1] CHAUVY C,COUDREUS L,TOUSSAINT P. Potential detrimental consequences of excessive PWHT on pressure vessel steel properties[J]. Journal of Pressure Vessel Technology-Transactions of the ASME,2012,134(2):021401-1-021401-6.
[2] NEERAJ B,ANIRUDH S. Potential detrimental consequences of stringent PWHT on pressure vessel steel forging[C]//Proceedings of 20th International Forgemasters Meeting,2017:254-263.
[3] CHANG H,LEE J,KIM N,et al Manufacturing of Ø1,000 grade large diameter round bloom and development of cost effective hot forging process using the round bloom[C]//Proceedings of 20th International Forgemasters Meeting,2017:399-407.
[4] 李昱明,洪锡军,彭颖红. 刚塑性含空洞材料变分原理的研究[J]. 上海交通大学学报,2001,35(10):1535-1538. LI Yuming,HONG Xinjun,PENG Yinghong. Study on the variation principle of rigid-plastic material containing voids[J]. Journal of Shanghai Jiao Tong University,2001,35(10):1535-1538.
[5] 祁荣胜,康冬,金淼,等. 大型锻件内部缺陷演变行为的跨尺度模拟方法[J]. 中国机械工程,2015(20):2821-2826. QI Rongsheng,KANG Dong,JIN Miao,et al. Trans-scale simulation method of evolution behavior of internal defects in large forgings[J]. China Mechanical Engineering,2015(20):2821-2826.
[6] 李学通,张沛,王敏婷,等. 大型饼类锻件镦粗夹层裂纹缺陷形成机理研究[J]. 固体力学学报,2012,33(3):273-278. LI Xuetong,ZHANG Pei,WANG Minting,et al. Study on mechanism of laminated crack defect in the upsetting process of heavy disk-shaped forgings[J]. Chinese Journal of Solid Mechanics,2012,33(3):273-278.
[7] 刘丽娟. 大锻件材料内部空洞型缺陷高温焊合过程的研究[D]. 上海:上海交通大学,2010. LIU Lijuan. Study on the bonding process of inner void defects in heavy forging at high temperature[D]. Shanghai:Shanghai Jiao Tong University,2010.
[8] 杨继东,车海伟,刘昆,等. 大型模锻压机多液压缸同步控制系统的研究[J]. 机床与液压,2015,43(14):85-87,90. YANG Jidong,Che Haiwei,LIU Kun,et al. Research on large forging presses multi-cylinder synchronous control system[J]. Machine Tool & Hydraulics,2015,43(14):85-87,90.
[9] 任运来,陈跃男,王志强,等. 基于塑性力学变分原理的大锻件镦粗变形研究[J]. 燕山大学学报,2018,42(1):22-28. REN Yunlai,CHEN Yuenan,WANG Zhiqiang,et al. On deformation of upsetting of heavy forgings based on variation principles for plastic mechanics[J]. Journal of Yanshan University,2018,42(1):22-28.
[10] 任运来,聂绍珉,牛龙江,等. 大型锻件内部空洞缺陷修复条件[J]. 机械工程学报,2008,44(2):248-252. REN Yunlai,NIE Shaomin,NIU Longjiang,et al. Healing conditions of large forgings internal voids defect[J]. Journal of Mechanical Engineering,2008,44(2):248-252.
[11] 希尔R. 塑性数学理论[M]. 北京:世界图书出版公司北京公司,2013. HILL R. The mathematical theory of plasticity[M]. Beijing:Beijing Company of World Publishing Corporation,2013.
[12] 徐秉业,陈森灿. 塑性理论简明教程[M]. 北京:清华大学出版社,1981. XU Bingye,CHEN Sencan. Concise tutorial on plasticity theory[M]. Beijing:Tsinghua University Press,1981.
[13] 鹫津久一郎. 弹性和塑性力学中的变分法[M]. 北京:科学出版社,2019. WASHIZU. Variational methods in elasticity and plasticity[M]. Beijing:Science Press,2019.
[14] QIAN W C. Second order approximation solution of nonlinear large deflection problems of Yongjiang railway bridge in Ningbo[J]. Applied Mathematics and Mechanics,2002,23(5):493-506.
[15] 任杰,孙贺磊,李加欣,等. 刚塑性材料第二变分原理的证明研究及应用[J]. 燕山大学学报,2019,43(6):497-502. REN Jie,SUN Helei,LI Jiaxin,et al. Proof and application of the second variational principle of rigid plastic materials[J]. Journal of Yanshan University,2019,43(6):497-502.
[16] 胡海昌. 广义变分原理在近似解中的合理应用[J]. 力学学报,1982(1):1-17. HU Haichang. On the rational utilization of generalized variational principles for approximate solutions[J]. Chinese Journal of Theoretical and Applied Mechanics,1982(1):1-17.
[17] LIANG Lifu,HU Haichang,LIU Shiquan.. Non-contemporaneous variations and Holder's principle[J]. Science in China Series G,2003,46(5):449-459.
[18] 张学良,张伟,温淑花,等. 结合面静摩擦因数尺度关联三维分形模型[J]. 机械工程学报,2021,57(9):127-138. ZHANG Xueliang,ZHANG Wei,WEN Shuhua,et al. Three-dimensional fractal model with scale correlation for static friction factor of joint interfaces[J]. Journal of Mechanical Engineering,2021,57(9):127-138.
[19] 王晓笋,巫世晶. 二维库伦摩擦力系统的精确解及新数值算法研究[J]. 机械工程学报,2016,52(19):110-115. WANG Xiaosun,WU Shijing. Investigation of the closed form solutions and new algorithm for two-dimensional frictional system[J]. Journal of Mechanical Engineering,2016,52(19):110-115.
[20] 俞汉清,陈金德. 金属塑性成形原理[M]. 北京:机械工业出版社,2017. YU Hanqing,CHEN Jinde. Principles of metal forming[M]. Beijing:China Machine Press,2017.
[21] 张凯锋,陆辛. 锻压手册[M]. 北京:机械工业出版社,2020. ZHANG Kaifeng,LU Xin. Forging manual[M]. Beijing:China Machine Press,2020.
[22] 梁晨,刘助柏,王连东. 新FM法拔长的临界砧宽比、临界料宽比及工艺参数研究[J]. 机械工程学报,2003,39(12):154-157. LIANG Chen,LIU Zhubai,WANG Liandong. Study on the critical values of tool width ratio and blank width ratio and the processing parameter matching of FM forging[J]. Journal of Mechanical Engineering,2003,39(12):154-157.

大型锻件应力场分析计算的新方法及应用

New Method and Application of Stress Field Calculation for Large Forgings

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 9

编辑推荐

Metrics

本文评价

[1]	任运来;牛龙江;陈志英;聂绍珉;王庆伟. 锻件内部脆性夹杂物边界裂纹锻合的应力条件[J]. , 2014, 50(22): 84-89.
[2]	刘鑫;钟约先;马庆贤;袁朝龙. 大型核电低压转子锻件倒棱新工艺的模拟[J]. , 2010, 46(24): 16-21.
[3]	任运来;聂绍珉;牛龙江;朱磊. 大型锻件内部空洞缺陷修复条件[J]. , 2008, 44(2): 248-252.
[4]	任运来;聂绍珉;牛龙江;陈颖. 大型锻件锻造拔长新工艺[J]. , 2007, 43(11): 224-228.
[5]	孙辉;扶名福;杨国泰. 摩擦约束有限变形弹塑性广义变分不等原理[J]. , 2005, 41(3): 38-41.
[6]	张敦福;王锡平;赵俊峰. 悬臂输送管道流—固耦合动力学系统的直接解法[J]. , 2004, 40(3): 195-198.
[7]	孙辉;扶名福. 摩擦约束有限变形非线性弹性广义变分不等原理的半反推法[J]. , 2001, 37(8): 14-17.
[8]	付宝连;刘建军. 塑性力学相似非耦联系统的模拟变分原理[J]. , 1998, 34(6): 73-79，9.
[9]	郭会光;孙捷先;董仕深;李林章;杨明鼎;施香儒;赖长德. 大型汽轮机转子锻压技术的试验研究[J]. , 1993, 29(4): 71-74.