考虑残余应力的螺旋锥齿轮接触疲劳裂纹萌生-扩展寿命计算方法研究

doi:10.3901/JME.2022.23.028

机械工程学报 ›› 2022, Vol. 58 ›› Issue (23): 28-38.doi: 10.3901/JME.2022.23.028

扫码分享

考虑残余应力的螺旋锥齿轮接触疲劳裂纹萌生-扩展寿命计算方法研究

周长江¹, 王豪野¹, 靳广虎², 艾永生³

1. 湖南大学汽车车身先进设计制造国家重点实验室长沙 410082;
2. 南京航空航天大学直升机传动技术重点实验室南京 210016;
3. 中国航发湖南动力机械研究所株洲 412002

收稿日期:2022-06-14 修回日期:2022-09-15 出版日期:2022-12-05 发布日期:2023-02-08
通讯作者: 周长江(通信作者),男,1975年出生,博士,教授,博士研究生导师。主要研究方向为高性能传动、摩擦磨损与润滑、界面损伤与可靠性设计。E-mail:yangtsezhou@hnu.edu.cn
作者简介:王豪野,男,1996年出生,博士研究生。主要研究方向为结构强度与齿面损伤。E-mail:why27@hnu.edu.cn;靳广虎,男,1971年出生,博士,副教授,硕士研究生导师。主要研究方向为机械传动、结构强度与动力学。E-mail:meeghjin@nuaa.edu.cn;艾永生,男,1982年出生,学士,高级工程师。主要研究方向为直升机传动系统设计与优化。E-mail:aiyongsheng04@163.com
基金资助:
国家自然科学基金(5207051373)和直升机传动技术重点实验室基金(HTL-O-21K01)资助项目。

Calculation Method of Contact Fatigue Life of Spiral Bevel Gears Considering Residual Stress

ZHOU Changjiang¹, WANG Haoye¹, JIN Guanghu², AI Yongshen³

1. State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha 410082;
2. National Key Laboratory of Science and Technology on Helicopter Transmission, Nanjing University of Aeronautics and Astronautics, Nanjing 210016;
3. AECC Hunan Aviation Powerplant Research Institute, Zhuzhou 412002

Received:2022-06-14 Revised:2022-09-15 Online:2022-12-05 Published:2023-02-08

摘要/Abstract

摘要： 考虑渗碳、磨齿、喷丸等工艺产生的齿面残余应力，建立齿面接触应力与残余应力的复合应力场，提出一种螺旋锥齿轮接触疲劳裂纹萌生-扩展寿命计算方法。构建齿轮有限元接触分析模型，计算多轴交变接触应力场。考虑空间螺旋曲面残余应力分布的复杂性，将变曲率齿面离散为网状节点；测量各节点表面与次表面的残余应力，建立齿面残余应力场。基于Dang Van多轴疲劳准则，构建齿面裂纹萌生模型；计及残余应力与裂纹闭合效应，构建齿面裂纹扩展模型。计算复合应力场下齿轮接触疲劳寿命，研究残余应力对齿面裂纹萌生-扩展寿命的影响规律。结果发现：复杂齿面空间变曲率会影响喷丸等工艺产生的残余应力分布，中心区域的残余压应力高出齿面边缘区域约20%；复合应力场下齿面裂纹萌生位置与寿命主要取决于接触应力，残余应力会改变齿面节点平均应力进而影响疲劳寿命；齿面裂纹扩展寿命约占全寿命的10%，表征齿轮接触疲劳快速失效至迅速断裂。上述研究对于高性能齿轮传动的长寿命、高可靠性设计具有一定的参考价值。

关键词: 螺旋锥齿轮, 复合应力场, 裂纹萌生, 裂纹扩展, 接触疲劳寿命

Abstract: Considering the residual stress of tooth surface produced by carburizing, tooth grinding and shot peening, the complex stress field of tooth surface contact stress and residual stress is established, and a method for calculating contact fatigue crack initiation and propagation life of spiral bevel gears is proposed. A gear finite element contact analysis model is established to calculate the multi-axis alternating contact stress field. Considering the complexity of residual stress distribution of space spiral surface, the tooth surface with variable curvature is discretized into network nodes. The residual stress field of tooth surface is established by measuring the surface and sub-surface residual stress. Based on Dang Van criterion, a tooth surface crack initiation model is established. Considering the residual stress and crack closure effect, a model of tooth surface crack propagation is established, and the gear contact fatigue life under compound stress field is calculated. The results show that the spatial curvature of tooth surface affects the distribution of residual stress caused by shot peening, and the residual compressive stress in the central region is about 20% higher than that in the edge region. The crack initiation location and the fatigue life of the tooth surface are mainly determined by the contact stress, and the residual stress will affect the average stress. The crack propagation life accounts for about 10% of the whole life, which indicates the failure to rapid fracture of gear contact fatigue. The research can be an important reference in the design of long life and high reliability gear transmission.

Key words: spiral bevel gear, complex stress field, crack initiation, crack propagation, contact fatigue life

中图分类号:

TG156

周长江, 王豪野, 靳广虎, 艾永生. 考虑残余应力的螺旋锥齿轮接触疲劳裂纹萌生-扩展寿命计算方法研究[J]. 机械工程学报, 2022, 58(23): 28-38.

ZHOU Changjiang, WANG Haoye, JIN Guanghu, AI Yongshen. Calculation Method of Contact Fatigue Life of Spiral Bevel Gears Considering Residual Stress[J]. Journal of Mechanical Engineering, 2022, 58(23): 28-38.

参考文献

[1] DAVIES D P,JENKINS S L,BELBEN F R. Survey of fatigue failures in helicopter components and some lessons learnt[J]. Engineering Failure Analysis,2013,32(9):134-151.
[2] 刘怀举,张博宇,朱才朝,等. 齿轮接触疲劳理论研究进展[J]. 机械工程学报,2021,52(3):95-120.LIU Huaiju,ZHANG Boyu,ZHU Caichao,et al. State of art of gear contact fatigue theories[J]. Journal of Mechanical Engineering,2021,52(3):95-120.
[3] YANG S,JI Y,MO Y,et al. Effects of prestressing of the ring gear in interference fit on flexural fatigue strength of tooth root[J]. Chinese Journal of Mechanical Engineering,2019,32(4):95-103.
[4] 梁志强,黄迪青,周天丰,等. 螺旋伞齿轮磨削表面形貌仿真与试验研究[J]. 机械工程学报,2019,55(3):191-198. LIANG Zhiqiang,HUANG Diqing,ZHOU Tianfeng,et al. Simulation and experimental research on grinding surface topography of spiral bevel gear[J]. Journal of Mechanical Engineering,2019,55(3):191-198.
[5] 周长江,龙继国,王昊辰,等. 弧齿锥齿轮接触与弯曲强度ISO与AGMA标准比较及有限元验证[J]. 湖南大学学报(自然科学版),2018,45(4):1-9.ZHOU Changjiang,LONG Jiguo,WANG Haochen,et al. Comparative analysis of contact and bending strength using ISO and AGMA standards in spiral bevel gears with numerical verification[J]. Journal of Hunan University (Natural Sciences),2018,45(4):1-9.
[6] XIANG Dong,SHEN Y,WEI Y. A contact force model considering meshing and collision states for dynamic analysisin helical gear system[J]. Chinese Journal of Mechanical Engineering,2019,32(3):78-89.
[7] ASLANTAS K,TASGETIREN S. A study of spur gear pitting formation and life prediction[J]. Wear,2004,257:1167-1175.
[8] SEABRA J,KLEIN M,HN B,et al. Theoretical and experimental investigations about flank breakage in bevel gears[J]. Industrial Lubrication and Tribology,2011,63(1):5-10.
[9] LI S,KAHRAMAN A. A fatigue model for contacts under mixed elastohydrodynamic lubrication condition[J]. International Journal of Fatigue,2011,33(3):427-436.
[10] 贾小攀,王文中,赵自强,等. 斜齿轮弹流润滑下的接触疲劳寿命计算[J]. 摩擦学学报,2014,34(1):8-14.JIA Xiaopan,WANG Wenzhong,ZHAO Ziqiang,et al. A contact fatigue model of helical gear under elastohydrodynamic lubrication[J]. Tribology,2014,34(1):8-14.
[11] KAROLCZUK A,MACHA E. A review of critical plane orientations in multiaxial fatigue failure criteria of metallic materials[J]. International Journal of Fracture,2005,134(3-4):267-304.
[12] QIN W J,GUAN C Y. An investigation of contact stresses and crack initiation in spur gears based on finite element dynamics analysis[J]. International Journal of Mechanical Sciences,2014,83(1):96-103.
[13] CHOI Y. A study on the effects of machining-induced residual stress on rolling contact fatigue[J]. International Journal of Fatigue,2009,31(10):1517-1523.
[14] BATISTA A C,DIAS A M,LEBRUN J C,et al. Contact fatigue of automotive gears:Evolution and effects of residual stresses introduced by surface treatments[J]. Fatigue & Fracture of Engineering Materials & Structures,2000,23(3):217-228.
[15] LIU H,LIU H,ZHU C,et al. Evaluation of contact fatigue life of a wind turbine gear pair considering residual stress[J]. Journal of Tribology,2018,140(6):041102.
[16] HE H,LIU H,ZHU C,et al. Study on the gear fatigue behavior considering the effect of residual stress based on the continuum damage approach[J]. Engineering Failure Analysis,2019,104(11):531-544.
[17] WEI W,LIU H,ZHU C,et al. Effect of the residual stress on contact fatigue of a wind turbine carburized gear with multiaxial fatigue criteria[J]. International Journal of Mechanical Sciences,2019,151(1):263-273.
[18] 张宇,严宏志,曾韬. 弧齿锥齿轮双重螺旋法切齿原理及齿面接触分析研究[J]. 机械工程学报,2015,51(21):15-23.ZHANG Yu,YAN Hongzhi,ZENG Tao. Cutting principle and tooth contact analysis of spiral bevel and hypoid gears generated by duplex helical method[J]. Journal of Mechanical Engineering,2015,51(21):15-23.
[19] DING H,TANG J,SHAO W,et al. Optimal modification of tooth flank form error considering measurement and compensation of cutter geometric errors for spiral bevel and hypoid gears[J]. Mechanism Machine Theory,2017,118(2):14-31.
[20] 唐祎,何玉辉,唐进元. 基于万能运动参数的弧齿锥齿轮建模方法[J]. 中南大学学报,2020,51(1):33-40.TANG Yi,HE Yuhui,TANG Jinyuan. General modeling method of spiral bevel gear based on universal motion parameters[J]. Journal of Central South University (Science and Technology),2020,51(1):33-40.
[21] 魏冰阳,王振,杨建军,等. Ease-off拓扑修形齿面拟赫兹接触与摩擦特性分析[J]. 机械工程学报,2021,57(1):61-67.WEI Bingyang,WANG Zhen,YANG Jianjun,et al. Analysis on quasi hertzian contact and friction characteristics of tooth surface modified by ease-off topology[J]. Journal of Mechanical Engineering,2021,57(1):61-67.
[22] ZHOU C,HU B,QIAN X,et al. A novel prediction method for gear friction coefficients based on a computational inverse technique[J]. Tribology International,2018,127(2):200-208.
[23] WANG Y,YAO W. Evaluation and comparison of several multiaxial fatigue criteria[J]. International Journal of Fatigue,2004,26(1):17-25.
[24] DANTAS R,CORREIA J,LESIUK G,et al. Evaluation of multiaxial high-cycle fatigue criteria under proportional loading for S355 steel[J]. Engineering Failure Analysis,2020,120(2):105037.
[25] CONRADO E,GORLA C. Contact fatigue limits of gears,railway wheels and rails determined by means of multiaxial fatigue criteria[J]. Procedia Engineering,2011,10(5):965-970.
[26] LÜ Y,LEI L,SUN L,et al. Effect of shot peening on the fatigue resistance of laser surface melted 20CrMnTi steel gear[J]. Materials Science & Engineering A,2015,629:8-15.
[27] 杨佳,王勇,李蕊,等. 取样方向对含单边裂纹牛卡纸拉伸断裂行为的影响[J]. 包装工程,2022,43(15):203-208.YANG Jia,WANG Yong,LI Rui,et al. Effect of sampling direction on tensile fracture behavior of kraft paper with unilateral crack[J]. Packaging Engineering,2022,43(15):203-208.
[28] KEER L M,BRYANT M D. A pitting model for rolling contact fatigue[J]. Journal of Lubrication Technology,1983,105(4):198-205.
[29] RYCERZ P,OLVER A,KADIRIC A. Propagation of surface initiated rolling contact fatigue cracks in bearing steel[J]. International Journal of Fatigue,2017,97(3):29-38.
[30] 银朝晖,赖旭平,赵永福,等. 冷却剂加锌对316LN应力腐蚀性能影响[J]. 包装工程,2022,43(7):139-145.YIN Zhaohui,LAI Xuping,ZHAO Yongfu,et al. Effects of zinc in coolant on stress corrosion resistance of 316LN[J]. Packaging Engineering,2022,43(7):139-145.
[31] HEARLE A D,JOHNSON K L. Mode Ⅱ stress intensity factors for a crack parallel to the surface of an elastic half-space subjected to a moving point load[J]. Journal of the Mechanics Physics of Solids,1985,33(1):61-81.
[32] SANGEON L,JUNGWUK H. Effect of crack closure on magnitude of modulated wave[J]. International Journal of Structural Stability Dynamics,2020,20(13):2041018.

考虑残余应力的螺旋锥齿轮接触疲劳裂纹萌生-扩展寿命计算方法研究

Calculation Method of Contact Fatigue Life of Spiral Bevel Gears Considering Residual Stress

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王博士, 陈楠楠, 蔡艳, 王敏. 低合金贝氏体高强钢模拟焊接粗晶热影响区低温疲劳韧脆转变行为及机制[J]. 机械工程学报, 2024, 60(6): 271-278.
[2]	孙士勇, 朱殿立, 李佳琦, 樊俊铃, 杨睿, 赵延广. 基于图像对比的疲劳裂纹扩展动态检测方法[J]. 机械工程学报, 2024, 60(18): 24-31.
[3]	高冲, 董丽虹, 王海斗, 刘彬, 吕晓仁. 整体加筋结构疲劳损伤研究进展[J]. 机械工程学报, 2024, 60(18): 116-127.
[4]	陈健, 孟义兴, 袁慎芳, 徐秋慧, 王卉. 融合导波监测的搭接结构裂纹扩展寿命孪生预测[J]. 机械工程学报, 2024, 60(16): 34-42.
[5]	李怡然, 尧军平, 梁超群, 肖鹏, 陈国鑫, 李步炜. 基于三维微观结构的SiC/AZ91D复合材料单轴拉伸过程中裂纹萌生扩展机制[J]. 机械工程学报, 2024, 60(16): 160-170.
[6]	赵雷, 武言, 徐连勇, 韩永典, 熊昱. 纳入拘束效应的焊接接头蠕变裂纹扩展速率预测方法[J]. 机械工程学报, 2024, 60(14): 126-138.
[7]	邓智铭, 黄土地, 黄洪钟, 尉询楷, 王浩. 变工况条件下角接触球轴承疲劳剥落故障演化加速试验载荷谱研究[J]. 机械工程学报, 2024, 60(13): 193-204.
[8]	唐沛, 张勇, 贾云飞, 李晓, 汪永纪. 双峰结构纯钛的低周疲劳性能研究：试验和模拟[J]. 机械工程学报, 2024, 60(12): 228-239.
[9]	喻健, 缑百勇, 陈桂勇, 张腾, 马斌麟, 樊祥洪, 陈鑫, 王逸韬. 胶铆混合修理结构疲劳裂纹扩展性能分析[J]. 机械工程学报, 2023, 59(22): 352-368.
[10]	韩啸, 孙亮亮, 刘博, 刘哲远, 吴承伟. 胶层厚度对胶接波纹板三点弯曲力学性能影响研究[J]. 机械工程学报, 2023, 59(2): 104-112.
[11]	李鹤飞, 张鹏, 张哲峰. 高强钢断裂韧性与疲劳裂纹扩展评价方法研究进展[J]. 机械工程学报, 2023, 59(16): 18-31.
[12]	王超, 杨冰, 朱涛, 肖守讷, 阳光武, 范晓达. 表面强化车轴裂纹扩展及剩余寿命预测方法研究[J]. 机械工程学报, 2023, 59(14): 43-53.
[13]	曹雪梅, 何宏图, 魏冰阳, 许浩. 螺旋锥齿轮数字孪生体模态参数的提取与分析[J]. 机械工程学报, 2023, 59(13): 260-267.
[14]	宋明, 马帅, 杜传胜, 蒋文春, 王炳英. 不同流道布置的平板式固体氧化物燃料电池蠕变损伤研究[J]. 机械工程学报, 2023, 59(10): 76-84.
[15]	郑战光, 覃里杜, 谢昌吉, 潘淑琴, 孙腾. 晶体塑性疲劳指示因子研究方法综述[J]. 机械工程学报, 2022, 58(8): 105-116.