高性能环类零件绿色智能轧制的研究进展

doi:10.3901/JME.2022.20.186

机械工程学报 ›› 2022, Vol. 58 ›› Issue (20): 186-197.doi: 10.3901/JME.2022.20.186

• 特邀专栏：高性能塑性成形制造(下) • 上一篇下一篇

扫码分享

高性能环类零件绿色智能轧制的研究进展

兰箭^1,2,3, 钱东升^1,2,3, 邓加东^1,2, 华林^1,4

1. 武汉理工大学现代汽车零部件技术湖北省重点实验室武汉 430070;
2. 武汉理工大学湖北省材料绿色精密成形工程技术研究中心武汉 430070;
3. 武汉理工大学材料科学与工程学院武汉 430070;
4. 武汉理工大学汽车零部件技术湖北省协同创新中心武汉 430070

收稿日期:2021-12-06 修回日期:2022-06-09 出版日期:2022-10-20 发布日期:2022-12-27
通讯作者: 华林(通信作者)，男，1962 年出生，博士，教授，博士研究生导师。主要研究方向为高性能成形制造技术与装备。E-mail：hualin@whut.edu.cn
作者简介:兰箭，男，1972年出生，博士，教授。主要研究方向为环类零件精密成形制造技术。E-mail：jlan@whut.edu.cn;钱东升，男，1982年出生，博士，教授。主要研究方向为环类零件精密轧制技术。E-mail：qiands@whut.edu.cn;邓加东，男，1988年出生，博士，讲师。主要研究方向为环类零件精密轧制技术。E-mail：dengjd88@126.com
基金资助:
国家重点研发计划(2019YFB1704500)、国家自然科学基金(51975439)和教育部创新团队发展计划(IRT13087)资助项目。

Development of Green and Intelligent Rolling for High Performance Ring Parts

LAN Jian^1,2,3, QIAN Dongsheng^1,2,3, DENG Jiadong^1,2, HUA Lin^1,4

1. Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan 430070;
2. Hubei Engineering Research Center for Green & Precision Material Forming, Wuhan University of Technology, Wuhan 430070;
3. School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070;
4. Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan University of Technology, Wuhan 430070

Received:2021-12-06 Revised:2022-06-09 Online:2022-10-20 Published:2022-12-27

摘要/Abstract

摘要： 高性能环类零件广泛应用于众多重要工业领域，其制造技术体现了国家机械制造能力和水平。环件轧制是一种连续局部塑性成形技术，也是高性能环类零件先进成形制造技术。基于作者在高性能环类件轧制成形领域的研究基础，对我国高性能环件轧制成形理论和应用现状和工艺发展进行系统介绍：分析高性能环件轧制成形特点；阐述环件轧制成形理论，包括轧环条件、力能计算方法和轧制过程模拟进展；介绍我国高性能环件轧制成形技术在机械、航空、航天等工业领域的应用成果；例举当前我国环轧制成形工艺装备的最新进展；结合国家重点研发计划的研发情况，介绍高性能环类零件智能轧制和绿色轧制的建设现状。我国已经成为世界高性能环类零件重要制造基地，作为基础和关键重要部件的高效制造方法，高性能环类零件绿色智能轧制将为我国制造业双碳目标提供有效的解决方案。

关键词: 环类零件, 环件轧制, 绿色制造, 智能制造

Abstract: High Performance Ring Parts(HPRPs) are a widely applied in many industry sectors, whose manufacturing technology is an important symbol of the national mechanical manufacturing capacity. Ring rolling is a continuously partial plastic forming technology, which is an advanced forming manufacturing technology of HPRPs. On basis of the research foundation of authors in rolling of HPRPs, the theory, applications and new technologies of HPRPs rolling are systematically introduced. The forming characteristics of bearing rolling are analyzed; the ring rolling forming theory are formulated, which include the rolling condition and force and energy computational method; the applications of HPRPs rolling technology in China mechanic, aviation and aerospace industry sectors are introduced; the new development of ring rolling process and equipment are described. Combined with the progress of national key R & D plan, the construction status of intelligent rolling and green rolling of HPRPs is introduced. China has become an important country of HPRPs rolling. As an efficient manufacturing method of fundamental, key and important parts, green and intelligent rolling for HPRPs would provide the best solution for China’s double carbon target.

Key words: ring parts, ring rolling, green manufacturing, intelligent manufacturing

中图分类号:

TG331

兰箭, 钱东升, 邓加东, 华林. 高性能环类零件绿色智能轧制的研究进展[J]. 机械工程学报, 2022, 58(20): 186-197.

LAN Jian, QIAN Dongsheng, DENG Jiadong, HUA Lin. Development of Green and Intelligent Rolling for High Performance Ring Parts[J]. Journal of Mechanical Engineering, 2022, 58(20): 186-197.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: http://www.cjmenet.com.cn/CN/10.3901/JME.2022.20.186

http://www.cjmenet.com.cn/CN/Y2022/V58/I20/186

参考文献

[1] 杨博文. 习近平新发展理念下碳达峰、碳中和目标战略实现的系统思维、经济理路与科学路径[J]. 经济学家，2021(9):5-12. YANG Bowen. The systematic thinking, economic logic and scientific path for the realization of carbon summit and carbon neutral target strategy under Xi Jin-Ping’s new development concept[J]. Economist，2021(9):5-12.
[2] 国家自然科学基金委员会工程与材料科学部. 机械工程学科发展战略报告(2011-2020)[M]. 北京:科学出版社，2010. Engineering and Materials Science Division of the National Natural Science Foundation Committee. Mechanical engineering disciplines development trategy report (2011-2020)[M]. Beijing:Science Press，2010.
[3] 中华人民共和国国务院. 国家中长期科学和技术发展规划纲要(2006-2020年)[EB/OL]. [2006-02-09]. http://www.gov.cn/jrzg/200602/09/content_183787.htm. State Council of the People’s Republic of China. National medium-and-long-term scientific and technological development plan (2006-2020 year) [EB/OL]. [2006-02-09]. http://www.gov.cn/jrzg/2006-02/09/content_183787.htm.
[4] 华林，黄兴高，朱春东. 环件轧制理论和技术[M]. 北京:机械工业出版社，2001. HUA Lin，HUANG Xinggao，ZHU Chundong. Theory and technology of ring rolling[M]. Beijing:China Machine Press，2001.
[5] 胡正寰，华林. 零件轧制成形技术[M]. 北京:化学工业出版社，2010. HU Zhenghuan，HUA Lin. Technology of rotary metal forming[M]. Beijing:Chemical Industry Press，2010.
[6] 华林，钱东升. 轴承环轧制成形理论和技术[J]. 机械工程学报，2014(16):70-76. HUA Lin，QIAN Dongsheng. Ring rolling forming theory and technology for bearing[J]. Journal of Mechanical Engineering，2014(16):70-76.
[7] 华林，钱东升，邓加东，等. 超大型环件轧制理论与技术[J]. 锻压技术，2018，43(7):17-31. Hua Lin，Qian Dongsheng，Deng Jiadong，et al. Theory and technology of super-large ring rolling[J]. Forging & Stamping Technology，2018，43(7):17-31.
[8] Hua Lin，Deng Jiadong，Qian Dongsheng. Recent development of ring rolling theory and technique[J]. International Journal of Materials & Product Technology，2017，54(1-3):65-87.
[9] M Ю席夫林. 车轮和轮箍轧制[M]. 北京:中国工业出版社，1965. M Ю Шифрин. Rolling of wheel and tyre[M]. Beijing:Chinese Industry Press，1965.
[10] JOHNSON W，NEEDHAM G. Experiments on ring rolling[J]. International Journal of Mechanical Sciences，1968，10(2):95-113.
[11] HAWKYARD J B，JOHNSON W，KIRHLAND J，et al. Analyses for roll force and torque in ring rolling，with some supporting experiments[J]. International Journal of Mechanical Sciences，1973，15(11):873-893.
[12] MAMALIS A G，HAKYARD J B，JOHNSON W. On the pressure distribution between stock and rolls in ring rolling[J]. International Journal of Mechanical Sciences，1976，18(4):184-195.
[13] ALLWOOD J M，TEKKAYA A E，STANISTREET T F. The development of ring rolling technology[J]. Steel Research International，2005，76(2-3):111-120.
[14] ALLWOOD J M，TEKKAYA A E，STANISTREET T F. The development of ring rolling technology-part2:Investigation of process behavior and production equipment[J]. Steel Research International，2005，76(7):491-507.
[15] JOUN M S，CHUNG J H，SHIVPURI R. Axisymmetric forging approach to preform design in ring rolling using a rigid-viscoplastic finite element method[J]. International Journal of Machine Tools and Manufacture，1998，38(10-11):1183-1191.
[16] YANG D Y，KIM K H，HAWKYARD J B. Simulation of T-section profile ring rolling by the 3-D rigid-plastic finite element method[J]. International Journal of Mechanical Sciences，1991，33(7):541-550.
[17] DAVEY K，WARD M J. The practicalities of ring rolling simulation for profiled rings[J]. Journal of Materials Processing Technology，2002，125-126:619-625.
[18] SONG J L，DOWSON A L，JACOBS M H，et al. Coupled thermo-mechanical finite-element modeling of hot ring rolling process[J]. Journal of Materials Processing Technology，2002，121:332-340.
[19] MENG Wen，Zhao Guoqun，Guan Yanjin. A mandrel feeding strategy in conical ring rolling process[J]. Mathematical Problems in Engineering，2014，2014:364274.
[20] TANG Xuefeng，Wang Baoyu，Zhang Hua，et al. Study on the microstructure evolution during radial-axial ring rolling of IN718 using a unified internal state variable material model[J]. International Journal of Mechanical Sciences，2017，128-129:235-252.
[21] ZHOU J，Wang F L，Wang M H，et al. Study on forming defects in the rolling process of large aluminum alloy ring via adaptive controlled simulation[J]. International Journal of Advanced Manufacturing Technology，2011，55(1-4):95-106.
[22] XU Wujiao，Yang Xiaobing，Gong Xiaotao，et al. A new mathematical model for predicting the diameter expansion of flat ring in radial-axial ring rolling[J]. International Journal of Advanced Manufacturing Technology，2012，60(9-12):913-921.
[23] YANG H，Wang M，Guo L G，et al. 3D coupled thermo-mechanical FE modeling of blank size effects on the uniformity of strain and temperature distributions during hot rolling of titanium alloy large rings[J]. Computational Materials Science，2008，44(2):611-621.
[24] WANG M，Yang H，Zhang C，et al. Microstructure evolution modeling of titanium alloy large ring in hot ring rolling[J]. International Journal of Advanced Manufacturing Technology，2013，66(9-12):1427-1437.
[25] SEITZ J，Jenkouk V，Hirt G. Manufacturing dish shaped rings on radial-axial ring rolling mills[J]. Production Engineering，2013，7(6):611-618.
[26] ZHOU P Z，Zhang L W，GU S D，et al. Mathematic modeling and FE simulation of radial-axial ring rolling large L-section ring by shape axial roll[J]. International Journal of Advanced Manufacturing Technology，2014，72(5-8):729-738.
[27] WANG L G，Zhang Y F，MA H. Optimization design of large-diameter non-rectangular sectional ring blank for ring rolling[J]. Advanced Materials Research，2011，308-310:847-851.
[28] HUA Lin，ZHAO Zhongzhi. The extremum parameters in ring rolling[J]. Journal of Materials Processing Technology，1997，69(1-3):273-276.
[29] HUA Lin，MEI Xuesong，WU Xutang. Vibration and control in ring rolling process[J]. Transactions of Nonferrous Metals Society of China，1999，9(2):213-217.
[30] 华林. 环件闭式轧制力和力矩上限计算[J]. 力学与实践，1994，16(3):39-43. HUA Lin. The rolling force and torque of closed ring rolling based on the upper bound solution[J]. Mechanics and Practice，1994，16(3):39-43.
[31] 华林，赵仲治，王华昌. 环件轧制原理和设计方法[J]. 机械工程学报，1996，32(6):66-70. HUA Lin，ZHAO Zhongzhi，WANG Huachang. Principle and design method forring rolling[J]. Journal of Mechanical Engineering，1996，32(6):66-70.
[32] 华林，梅雪松，吴序堂. 基于空间啮合理论的环件轧制孔型设计[J]. 机械科学与技术，1999，18(6):966-968. HUA Lin，MEI Xuesong，WU Xutang. Design of rolled groove of ring parts based on spatial engaging theory[J]. Mechanical Science and Technology，1999，18(6):966-968.
[33] 华林，梅雪松，吴序堂. 环件轧制孔型共轭设计[J]. 汽车工程，2000，22(1):59-61. HUA Lin，MEI Xuesong，WU Xutang. A conjugate design of ring rolling groove[J]. Automotive Engineering，2000，22(1):59-61.
[34] HUA Lin，PAN Libo，LAN Jian. Researches on the ring stiffness condition in radial-axial ring rolling[J]. Journal of Materials Processing Technology，2009，209:2570-2575.
[35] JENKOUK V，Hirt G，Franzke M，et al. Finite element analysis of the ring rolling process with integrated closed-loop control[J]. CIRP Annals，2012，61(1):267-270.
[36] 郭良刚，王凤琪，梁磊，等. 高性能环件辗轧成形智能仿真优化新思路与研究进展简[J]. 精密成形工程，2017，9(4):1-11. GUO Lianggang，Wang Fengqi，Liang Lei，et al. New idea and advances in intelligent simulation and optimization of high-performance ring rolling process[J]. Journal of Netshape Forming Engineering，2017，9(4):1-11.
[37] LIANG L，Guo L，Wang Y，et al. Towards an intelligent FE simulation for real-time temperature- controlled radial-axial ring rolling process[J]. Journal of Manufacturing Processes，2019，48:1-11.
[38] 顾青. GH4169机匣环锻件制坯工艺及强化机理研究[D]. 武汉:武汉理工大学，2019. GU Qing. Research on aeroengine case ring pre-forming and strengthening mechanism of GH4169[D]. Wuhan:Wuhan University of Technology，2019.
[39] LAN Jian，HUANG Hai，MAO Huajie，et al. Phase transformation and grain growth behaviors of superalloy IN718 during heat treatment[J]. Materials Today Communications，2020(24):101347.
[40] 钱东升，姜雪，兰箭，等. 一种铝合金锥筒环件径向热轧成形方法:中国，CN201610279295.X[P]. 2016-07-06. QIAN Dongsheng，JIANG Xue，LAN Jian，et al. A process of radial hot rolling for aluminum cone ring:China，CN201610279295.X[P]. 2016-07-06.
[41] 郭良刚，邸伟佳，杨合，等. 难变形材料环件双向辗轧过程轧制曲线设计方法[J]. 机械工程学报，2014，50(16):83-88. GUO Lianggang，DI Weijia，Yang He，et al. Design method of rolling curve during radial-axial ring rolling process for difficult-to-deform materials[J]. Journal of Mechanical Engineering，2014，50(16):83-88.
[42] 兰箭，顾青，李姚君. 大型铝合金铸锭均匀化镦拔优化与模拟[J]. 精密成形工程，2017，9(4):43-46. LAN Jian，GU Qing，LI Yaojun. Uniformity upsetting-stretching and simulation of large size aluminum alloy casting[J]. Journal of Net Shape Forming，2017，9(4):43-46.
[43] 秦芳诚，齐会萍，李永堂，等. 环形零件短流程铸辗复合成形技术研究进展[J]. 材料导报，2020，34(19):19152-19165. QIN Fangcheng，QI Huiping，LI Yongtang，et al. Advances in compact cast-rolling forming of ring-shape parts[J]. Materials Review，2020，34(19):19152-19165.
[44] CLEAVER C，Allwood J. Incremental profile ring rolling with axial and circumferential constraints[J]. CIRP Annals，2017，66:285-288.
[45] DENG J D，Mao H J. A blank optimization design method for three roll cross rolling of complex-groove and small-hole ring[J]. International Journal of Mechanical Sciences，2015，93:218-228.
[46] HUA L，Deng J D，Qian D S，et al. Using upper bound solution to analyze force parameters of three-roll cross rolling of rings with small hole and deep groove[J]. International Journal of Advanced Manufacturing Technology，2015，76(1-4):353-366.
[47] QIAN Dongsheng，ZHANG Zhiqiang，HUA Lin. An advanced manufacturing method for thick-wall and deep-groovering—Combined ring rolling[J]. Journal of Materials Processing Technology，2013，213:1258-1267.
[48] 曹强，华林，钱东升，等. 大型厚壁深槽环件卧式复合轧制新方法理论与模拟[J]. 塑性工程学报，2013，20(3):1-9. CAO Qiang，HUA Lin，QIAN Dongsheng，et al. The horizontal combined ring rolling new forming method for large ring with thick wall and deep groove of surface[J]. Journal of Plasticity Engineering，2013，20(3):1-9.
[49] 兰箭，华林，毛华杰，等. 带外岛屿凸台的异型薄壁机匣环锻件轧制方法:中国，CN202110861755.0[P]. 2021-11-02. LAN Jian，HUA Lin，MAO Huajie，et al. Rolling process for aero-engine casing ring with bosses on outer surface:China，CN202110861755.0[P]. 2021-11-02.
[50] LAN Jian，HUA Lin，QIAN Dongsheng，et al. Radial rolling process for ring product that can control strain distribution of ring product:USA，US10173256B2[P]. 2019-01-08.
[51] HAN X H，Hua L，Peng L，et al. An innovative radial envelope forming method for manufacturing thin-walled cylindrical ring with inner web ribs[J]. Journal of Materials Processing Technology，2020，286:116836.
[52] 马慧娟，崔旭华，冒文杰，等，一种环形锻件的智能生产方法和系统:中国，CN202011517357.9[P]. 2020-12-21. MA Huijuan，CUI Xuhua，MAO Wenjie，et al. A method and system of intelligent manufacturing for ring parts:China，CN202011517357.9[P]. 2020-12-21.
[53] 潘利波. 环件径轴向轧制变形规律与CAPP系统研究[D]. 武汉:武汉理工大学，2007. PAN Libo. Research on axial rolling deformation law of ring and CAPP system[D]. Wuhan:Wuhan University of Technology，2007.
[54] 钱东升，程奇林，邓加东，等. 一种大型环件轧制用环坯推演设计方法及系统:中国，CN202010190590.4[P]. 2020-07-24. QIAN Dongsheng，CHEN Qilin，DENG Jiadong，et al. A deductive method and system of blank design for large ring rolling process:China，CN202010190590.4[P]. 2020-07-24.
[55] 邓加东，钱东升，华林，等. 大型环件径-轴向轧制过程偏心状态自适应调控方法:中国，CN202110321206.4[P]. 2021-03-25. DENG Jiadong，QIAN Dongsheng，HUA Lin，et al. An adaptive control method of eccentric state of large ring during radial-axial rolling process:China，CN202110321206.4[P]. 2021-03-25.

高性能环类零件绿色智能轧制的研究进展

Development of Green and Intelligent Rolling for High Performance Ring Parts

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	邓加东, 关山月, 汪小凯, 钱东升, 刘超, 刘伟, 华林. 高端装备大型环件网络协同智能轧制成形技术研发及应用[J]. 机械工程学报, 2026, 62(6): 65-86.
[2]	程鼎豪, 胡炳涛, 冯毅雄, 杨晨, 王飞, 袁富邦, 汪勇, 谭建荣. 面向铅酸蓄电池的未来工厂适应性数据模型体系及关键技术研究[J]. 机械工程学报, 2026, 62(3): 458-478.
[3]	肖兴源, 王黎明, 汪晓光, 李方义, 李剑峰, 聂延艳, 刘伟彤, 王忆同, 马艳, 王泊云, 崔羽齐. 面向多场景的机床加工过程环境排放清单数据获取方法研究[J]. 机械工程学报, 2026, 62(1): 361-373.
[4]	李嘉佳, 易茜, 冯毅雄, 朱鹏兴, 易树平. 人本智造单元中人-智能系统协同双智能体工作机制研究[J]. 机械工程学报, 2025, 61(3): 105-118.
[5]	黄思翰, 陈建鹏, 徐哲, 阎艳, 王国新. 基于大语言模型和机器视觉的智能制造系统人机自主协同作业方法[J]. 机械工程学报, 2025, 61(3): 130-141.
[6]	牛帅, 仝晓萌, 蔡茂林, 李毅波, 岳烜德. 面向智能制造的数控加工工艺重用关键技术：系统回顾[J]. 机械工程学报, 2025, 61(20): 301-317.
[7]	周汶蓉, 熊世权, 杨秦秦, 叶驰川, 徐梦宇, 易茜, 冯毅雄, 易树平. 一种主观人因失效防范的核电建造协同质量智能见证方法[J]. 机械工程学报, 2025, 61(15): 324-338.
[8]	高金吉. 人工自愈开辟智能流程制造向安健发展新途径[J]. 机械工程学报, 2025, 61(14): 117-129.
[9]	韩飞, 宁梓淮. 辊弯成形技术研究现状与发展趋势[J]. 机械工程学报, 2025, 61(11): 279-300.
[10]	张党, 赵永宣, 王振军, 张映锋. 数据-知识混合驱动的离散制造系统智能控制体系构架研究[J]. 机械工程学报, 2024, 60(6): 1-10,20.
[11]	狄子钧, 袁东风, 李东阳, 梁道君, 周晓天, 信苗苗, 曹凤, 雷腾飞. 基于多尺度-高效通道注意力网络的刀具故障诊断方法[J]. 机械工程学报, 2024, 60(6): 82-90.
[12]	王跃飞, 王超, 许于涛, 孙睿, 肖锴, 王凯林. 边-云协同下智能制造单元作业的数字孪生任务调度方法[J]. 机械工程学报, 2024, 60(6): 137-152.
[13]	苏建涛, 董绍华, 朱诗敏. 多目标混合流水车间机器故障重调度问题研究[J]. 机械工程学报, 2024, 60(4): 438-448.
[14]	王耀南, 谢核, 邓晶丹, 毛建旭, 李文龙, 张辉. 智能制造测量机器人关键技术研究综述[J]. 机械工程学报, 2024, 60(16): 1-18.
[15]	王文波, 张映锋, 顾寄南, 张耿, 完严. 数据驱动的离散制造系统性能退化机理建模与预测控制方法研究[J]. 机械工程学报, 2024, 60(16): 400-411.