5052铝合金的动态拉伸性能及其本构模型

doi:10.3901/JME.2022.08.160

机械工程学报 ›› 2022, Vol. 58 ›› Issue (8): 160-169.doi: 10.3901/JME.2022.08.160

扫码分享

5052铝合金的动态拉伸性能及其本构模型

方进秀^1,2,3, 张兴权⁴, 王会廷², 谢玲玲²

1. 安徽工业大学冶金工程与资源综合利用安徽省重点实验室马鞍山 243002;
2. 安徽工业大学冶金工程学院马鞍山 243002;
3. 马鞍山瑞辉实业有限公司马鞍山 243002;
4. 安徽工业大学机械工程学院马鞍山 243002

收稿日期:2021-03-10 修回日期:2021-09-16 出版日期:2022-04-20 发布日期:2022-06-13
通讯作者: 谢玲玲(通信作者),女,1978年出生,博士,讲师。主要研究方向为板料塑性成形、金属挤压与拉拔工艺、模具结构数值仿真优化设计、材料表面陶瓷基涂层服役行为。E-mail:xll@ahut.edu.cn
作者简介:方进秀,女,1988年出生,博士,讲师。主要研究方向为板料塑性成形、板材数字化成形工艺、电磁成形、模具结构数值仿真优化设计。E-mail:jinxiufang@ahut.edu.cn
基金资助:
冶金工程与资源综合利用安徽省重点实验室2020年度开放基金(SKF20-03)、安徽省自然科学基金(1908085QE229,1708085ME110)、安徽省重点研究与开发计划(201904a05020065)和安徽工业大学校青年基金(QZ201802)资助项目。

Dynamic Tensile Properties and Constitutive Model of 5052 Aluminum Alloy

FANG Jinxiu^1,2,3, ZHANG Xingquan⁴, WANG Huiting², XIE Lingling²

1. Anhui Province Key Laboratory of Metallurgical Engineering & Resources Recycling, Anhui University of Technology, Ma'anshan 243002;
2. School of Metallurgic Engineering, Anhui University of Technology, Ma'anshan 243002;
3. Maanshan Ruihui Industrial Co., Ltd., Ma'anshan 243002;
4. School of Mechanical Engineering, Anhui University of Technology, Ma'anshan 243002

Received:2021-03-10 Revised:2021-09-16 Online:2022-04-20 Published:2022-06-13

摘要/Abstract

摘要： 为了提高5052铝合金在应用中的安全性，准确的计算结构件在复杂载荷下的强度，非常有必要对材料在不同应变率下的力学性能进行研究。本文分别采用高温电子万能试验机和霍普金森拉杆装置对其进行了准静态和高应变率下的拉伸试验，得到了材料的应力-应变曲线，构建了能够准确描述其塑性变形行为的本构模型。结果表明：5052铝合金具有明显的应变率敏感性，且随着应变率的增加，其屈服强度和强度极限不断增加。基于试验结果，本文提出采用一种修正的Johnson-Cook模型来拟合材料的动态本构关系，拟合结果与试验数据吻合度较高；进一步使用ANSYS软件用此模型模拟了高应变率下试样的单向拉伸过程，提取典型节点的应力应变曲线，模拟结果与试验结果相吻合。说明本文所建立的修正Johnson-Cook模型能够较好地描述5052铝合金的动态特性，可为实际工程中的数值模拟问题提供数据支持，从而为零部件的加工工艺、结构设计和实际生产提供可靠的参考和有效的指导。

关键词: 5052铝合金, 霍普金森拉杆, 动态本构关系, Johnson-Cook本构模型

Abstract: In order to improve the safety of 5052 aluminum alloy in application and accurately calculate the strength of structural parts under complex loads, it is very necessary to study the mechanical properties of materials at different strain rates. In this paper, high temperature electronic universal testing machine and split Hopkinson tensile bar(SHTB) device are used to carry out the quasi-static and high strain rate tensile tests, the stress-strain curves of the materials are obtained, and a constative model which could accurately describe the plastic deformation behavior of the material is established. The results show that 5052 aluminum alloy has a distinct strain rate sensitivity, and with the increase of strain rate, the yield strength and ultimate strength increasing. Based on the experimental results, a modified Johnson-Cook model is proposed to fit the dynamic constitutive relation of the material, the fitting results are in good agreement with the test data; the ANSYS software is further used to simulate the uniaxial tensile process of the sample under high strain rate, and the stress-strain curve of the typical node is extracted, the results is consistent with the test result. It s indicated that the modified Johnson-Cook model can better describe the dynamic characteristics of 5052 aluminum alloy, and can provide data support for numerical simulation in practical engineering, so as to provide reliable reference and effective guidance for parts processing technology, structural design and actual production.

Key words: 5052 aluminum alloy, split hopkinson tensile bar, dynamic constitutive relation, Johnson-Cook constitutive model

中图分类号:

TG146

方进秀, 张兴权, 王会廷, 谢玲玲. 5052铝合金的动态拉伸性能及其本构模型[J]. 机械工程学报, 2022, 58(8): 160-169.

FANG Jinxiu, ZHANG Xingquan, WANG Huiting, XIE Lingling. Dynamic Tensile Properties and Constitutive Model of 5052 Aluminum Alloy[J]. Journal of Mechanical Engineering, 2022, 58(8): 160-169.

参考文献

[1] 蔡辉. 5052铝合金材料研究进展[J].铝加工,2011(6):33-39. CAI Hui. Research progress of 5052 aluminum alloy materials[J]. Aluminum Fabric,2011(6):33-39.
[2] 任文达. 5052铝合金变形行为及退火处理对其微观组织与性能的影响[D].长沙:中南大学,2007. REN Wenda. Effect of deformation behavior and annealing treatment on microstructure and properties of 5052 aluminum alloy[D]. Changsha:Central South University,2007.
[3] 蔡辉. 5052铝合金板材的应变硬化行为模型探讨[J].铝加工,2014,218(3):4-8. CAI Hui. Study on strain hardening behavior model of 5052 aluminum alloy sheet[J]. Aluminum Fabric,2014,218(3):4-8.
[4] 刘阳阳. 5052铝合金变形特性及裂纹生长规律研究[D].洛阳:河南科技大学,2018. LIU Yangyang. Research on deformation characteristics and regularity of crack growth of 5052 aluminum alloy[D]. Luoyang:Henan University of Science and Technology,2018.
[5] 郑玉林,陈文敬,任文达,等. 5052铝合金热压缩变形流变应力[J].铝加工,2007,30(2):17-21. ZHENG Yulin,CHEN Wenjing,REN Wenda,et al. Flow stress of 5052 aluminum alloy thermal compression deformation[J]. Aluminum Fabric,2007,30(2):17-21.
[6] 金飞翔.不同预变形不同应变速率铝合金板材变形行为及应用研究[D].北京:机械科学研究总院,2017. JIN Feixiang. Research on deformation behavior and application of pre-deformed aluminum alloy sheet with different strain rate[D]. Beijing:China Academy of Machinery Science and Technology,2017.
[7] 余海燕,王友. 5052铝合金冲压成形过程中韧性断裂的仿真研究[J].中国有色金属学报,2015(11):2975-2981. YU Haiyan,WANG You. Bulging simulation of ductile fracture of 5052 aluminum alloy[J]. The Chinese Journal of Nonferrous Metals,2015(11):2975-2981.
[8] SMERD R,WINKLER S,SALISBURY C,et al. High strain rate tensile testing of automotive aluminum alloy sheet[J]. International Journal of Impact Engineering,2005,32(1-4):541-560.
[9] 周琳,王子豪,文鹤鸣.简论金属材料JC本构模型的精确性(英文)[J].高压物理学报,2019,33(4):1-14. ZHOU Lin,WANG Zihao,WEN Heming. On the accuracy of the Johnson-Cook constitutive model for metals[J]. Chinese Journal of High Pressure Physics,2019,33(4):1-14.
[10] 周文华.预变形铝合金板材高应变率塑性变形行为研究[D].南昌:南昌航空大学,2014. ZHOU Wenhua. Plastic deformation behaviors of pre-strained aluminum under high strain rate loadings[D]. Nanchang:Nanchang Hangkong University,2014.
[11] MA Huijuan,HUANG Liang,TIAN Yi,et al. Effects of strain rate on dynamic mechanical behavior and microstructure evolution of 5A02-O aluminum alloy[J]. Materials Science&Engineering A,2014,606:233-239.
[12] ZHANG Dingni,SHANGGUAN Qianqian,XIE Canjun,et al. A modified Johnson-Cook model of dynamic tensile behaviors for 7075-T6 aluminum alloy[J]. Journal of Alloys&Compounds,2015,619:186-194.
[13] 张涛,陈伟,关玉璞. 2A70合金动态力学性能与本构关系的研究[J].南京航空航天大学学报,2013,45(3):367-372. ZHANG Tao,CHEN Wei,GUAN Yupu. Dynamic mechanical behavior and constitutive relations of aluminum alloy 2A70[J]. Journal of Nanjing University of Aeronautics and Astronautics,2013,45(3):367-372.
[14] 包卫平,赵昱臻,李春明,等.纯铁高温高应变率下的动态本构关系试验研究[J].机械工程学报,2010,46(4):74-79. BAO Weiping,ZHAO Yuzhen,LI Chunming,et al. Experimental research on the dynamic constitutive relation of pure iron at elevated temperatures and high strain rates[J]. Journal of Mechanical Engineering,2010,46(4):74-79.
[15] FANG Jinxiu,MO Jianhua,CUI Xiaohui,et al. Electromagnetic pulse-assisted incremental drawing of aluminum cylindrical cup[J]. Journal of Materials Processing Technology,2016,238:395-408.
[16] 方进秀.铝合金筒形件电磁脉冲辅助渐进拉深研究[D].武汉:华中科技大学,2016. FANG Jinxiu. Research on electromagnetic pulse assisted incremental drawing of aluminum alloy cylindrical parts[D]. Wuhan:Huazhong University of Science&Technology,2016.
[17] FANG Jinxiu,MO Jianhua,LI Jianjun. Microstructure difference of 5052 aluminum alloys under conventional drawing and electromagnetic pulse assisted incremental drawing[J]. Materials Characterization,2017,129:88-97.
[18] 杨开怀,曾建民,邹泽昌,等.模压变形5052铝合金的显微组织与室温拉伸性能[J].机械工程材料,2016(4):1-4. YANG Kaihuai,ZENG Jianmin,ZOU Zechang,et al. Microstructure and tensile properties at room temperature of 5052 aluminum alloy processed by groove pressing deformation[J]. Materials for Mechanical Engineering,2016(4):1-4.
[19] DING Sheng,KHAN S A,YANAGIMOTO J. Constitutive descriptions and microstructure evolution of extruded A5083 aluminum alloy during hot compression[J]. Materials Science&Engineering A,2018,728(25):133-143.
[20] 李建光,施琪,曹结东. Johnson-Cook本构方程的参数标定[J].兰州理工大学学报,2012,38(2):164-167. LI Jianguang,SHI Qi,CAO Jiedong. Parameters calibration for Johnson-Cook constitutive equation[J]. Journal of Lanzhou University of Technology,2012,38(2):164-167.
[21] 赵士忠,冯超,车全伟,等. 6008铝合金冲击实验及其动态本构模型[J].成都大学学报,2019(4):339-345. ZHAO Shizhong,FENG Chao,CHE Quanwei,et al. Impact experiment and dynamic constitutive model of 6008 aluminum alloy[J]. Journal of Chengdu University,2019(4):339-345.
[22] 雷经发,许孟,刘涛,等.高应变率下6061铝合金力学性能及本构模型研究[J].兵器材料科学与工程,2019,42(1):74-78. LEI Jingfa,XU Meng,LIU Tao,et al. Mechanical properties and constitutive model of 6061 aluminum alloy at high strain rate[J]. Ordnance Material Science and Engineering,2019,42(1):74-78.

5052铝合金的动态拉伸性能及其本构模型

Dynamic Tensile Properties and Constitutive Model of 5052 Aluminum Alloy

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价

[1]	任忠凯, 李赫, 许雅楠, 程前, 冯浩, 王涛. 脉冲电场辅助碳素钢极薄带拉伸变形的本构模型和微观组织演变[J]. 机械工程学报, 2024, 60(6): 245-260.
[2]	陈睿, 程诗敏, 温仕成, 赵子衡, 彭锐涛, 胡聪芳, 肖湘武. 基于J-C模型修正的7150-T6航空铝合金薄壁开孔圆管结构优化[J]. 机械工程学报, 2024, 60(11): 95-104.
[3]	茹一帆, 张乐乐, 刘文, 陈耕, 窦伟元. 基于缺口试件应力状态试验的Johnson-Cook模型参数反演标定方法[J]. 机械工程学报, 2021, 57(22): 60-70.
[4]	代启锋;宋仁伯;关小霞;郭志飞. 铁素体晶粒尺寸对铁素体—马氏体双相钢DP980动态变形行为影响[J]. , 2012, 48(6): 44-50.
[5]	包卫平;赵昱臻;李春明;任学平. 纯铁高温高应变率下的动态本构关系试验研究[J]. , 2010, 46(4): 74-79.