成形法磨削齿轮的磨削温度模型构建与分析

doi:10.3901/JME.2022.03.295

机械工程学报 ›› 2022, Vol. 58 ›› Issue (3): 295-304.doi: 10.3901/JME.2022.03.295

• 制造工艺与装备 • 上一篇

扫码分享

成形法磨削齿轮的磨削温度模型构建与分析

王龙¹, 汪刘应¹, 唐修检², 阳能军¹, 刘顾¹, 李若亭¹, 油银峰³

1. 火箭军工程大学作战保障学院西安 710000;
2. 陆军装甲兵学院装备再制造技术国防科技重点实验室北京 100072;
3. 中国人民解放军 96732部队邵阳 422000

收稿日期:2021-03-18 修回日期:2021-11-06 出版日期:2022-02-05 发布日期:2022-03-19
通讯作者: 唐修检(通信作者),男,1980年出生,博士,副教授,硕士研究生导师。主要研究方向为先进制造技术。E-mail:tangxiujian@sina.com
作者简介:王龙,男,1989年出生,博士,讲师,硕士研究生导师。主要研究方向为先进制造技术。E-mail:waloxs@163.com
基金资助:
国家自然科学基金资助项目（51905542；51775555）。

Construction and Analysis of Grinding Temperature Model for Gear Processed by Form Grinding Technology

WANG Long¹, WANG Liuying¹, TANG Xiujian², YANG Nengjun¹, LIU Gu¹, LI Ruoting¹, YOU Yinfeng³

1. Combat Support College, Rocket Force University of Engineering, Xi'an 710000;
2. National Defense Key Laboratory for Remanufacturing Technology, Academy of Army Armored Force, Beijing 100072;
3. Unit 96732 of PLA, Shaoyang 422000

Received:2021-03-18 Revised:2021-11-06 Online:2022-02-05 Published:2022-03-19

摘要/Abstract

摘要： 为了探究成形法磨削齿轮的磨削温度生成机制与变化规律，构建了单位接触宽度齿面磨削力与成形法磨齿温度的理论模型，揭示了它们与砂轮特性、齿轮规格、磨削用量与材料特性的内在关系。成形磨齿温度随着砂轮磨刃密度、磨削速度、径向进给量的增大而增大，却随着砂轮直径、齿轮压力角增大而减小。齿轮的模数对齿廓磨削温度的影响较弱，而齿数对齿顶与齿根两处磨削温度的影响态势却截然相反。成形法磨削齿轮的砂轮特性系数τ越大，则磨削性能越差，并在一定程度上决定了轴向进给速度对磨削温度的影响规律。此外，通过正交试验回归模型分析法证实了成形法磨齿温度理论模型具有较好的实际适用性，且微晶刚玉砂轮的磨削性能优于白刚玉砂轮。

关键词: 成形磨削, 齿轮, 磨削温度, 理论模型, 磨削机理

Abstract: To explore the generation mechanism and variation law of grinding temperature in gear grinding by forming method, the theoretical models of grinding force per unit contact width and form grinding temperature are established, and the internal relations with grinding wheel characteristics, gear specifications, grinding parameters and material characteristics are revealed. With the increase of grinding wheel density, grinding speed and radial feed rate, the temperature of gear grinding increases, but decreases with the increase of grinding wheel diameter and gear pressure angle. The influence of gear modulus on the grinding temperature of tooth profile is weak, while the influence of tooth number on the grinding temperature of tooth top and tooth root is opposite. The larger the wheel characteristic coefficient τ, the worse the grinding performance, which determines the influence of axial feed speed on grinding temperature. In addition, the regression model analysis method of orthogonal experiment proves that the theoretical model of gear grinding temperature of forming method has good practical applicability, and the grinding performance of microcrystalline corundum wheel is better than that of white corundum wheel.

Key words: form grinding, gear, grinding temperature, theoretical model, grinding mechanism

中图分类号:

TG58
TG61

王龙, 汪刘应, 唐修检, 阳能军, 刘顾, 李若亭, 油银峰. 成形法磨削齿轮的磨削温度模型构建与分析[J]. 机械工程学报, 2022, 58(3): 295-304.

WANG Long, WANG Liuying, TANG Xiujian, YANG Nengjun, LIU Gu, LI Ruoting, YOU Yinfeng. Construction and Analysis of Grinding Temperature Model for Gear Processed by Form Grinding Technology[J]. Journal of Mechanical Engineering, 2022, 58(3): 295-304.

参考文献

[1] TIAN L,FU Y,XU J,et al. The influence of speed on material removal mechanism in high speed grinding with single grit[J]. International Journal of Machine Tools & Manufacture,2015,89:192-201.
[2] 何玉辉,徐彦斌,唐进元,等. 磨削弧区高阶函数热源分布模型研究[J]. 机械工程学报,2019,55(7):199-206. HE Yuhui,XU Yanbin,TANG Jinyuan,et al. Study on heat source distribution model of high-order function in grinding arc area[J]. Journal of Mechanical Engineering,2019,55(7):199-206.
[3] WANG L,TIAN X L,LIU Q,et al. Material removal characteristics of 20CrMnTi steel in single grit cutting[J]. Materials and Manufacturing Processes,2017,32(13):1528-1536.
[4] 郭国强,安庆龙,林立芳,等. 成形磨削温度的理论与试验分析[J]. 机械工程学报,2018,54(3):203-215. GUO Guoqiang,AN Qinglong,LIN Lifang,et al. Analytical and experimental investigation of temperature in form grinding[J]. Journal of Mechanical Engineering,2018,54(3):203-215.
[5] WANG L,TIAN X L,LIU Q,et al.Grinding burn evaluation for 20CrMnTi steel based on binary images and neural network[J].International Journal of Advanced Manufacturing Technology,2017,93(9-12):4033-4042.
[6] 梁志强,黄迪青,周天丰,等. 螺旋伞齿轮磨削残余应力分布规律及仿真分析[J]. 机械工程学报,2018,54(21):183-190. LIANG Zhiqiang,HUANG Diqing,ZHOU Tianfeng,et al. Distribution characteristic and simulation analysis on grinding residual stress of spiral bevel gears[J]. Journal of Mechanical Engineering,2018,54(21):183-190.
[7] 郑晓猛,杜三明,张永振,等. 磨削加工对GCr15SiMn轴承钢表面组织性能的影响[J]. 材料热处理学报,2020,41(235):92-99. ZHENG Xiaomeng,DU Sanming,ZHANG Yongzhen,et al. Effect of grinding on surface microstructure and properties of GCr15SiMn bearin steel[J]. Transactions of Materials and Heat Treatment,2020,41(235):92-99.
[8] MALKIN S. Grinding technology:Theory and applications of machining with abrasives[M]. New York:Industrial Press,2008.
[9] JAEGER J C. Theoretical analysis on grinding temperature field[J]. Proceedings of the Linnean Society of New South Wales,1942,76:112-121.
[10] WEN L K,LIN J F. General temperature rise solution for a moving plane heat source problem in surface grinding[J]. International Journal of Advanced Manufacturing Technology,2006,31(3-4):268.
[11] TIAN Y,SHIRINZADEH B,ZHANG D,et al. Effects of the heat source profiles on the thermal distribution for ultraprecision grinding[J]. Precision Engineering,2009,33(4):447-458.
[12] ROWE W B. Thermal analysis of high efficiency deep grinding[J]. International Journal of Machine Tools & Manufacture,2001,41(1):1-19.
[13] 兰雄侯,王继先,高航. 磨削温度理论研究的现状与进展[J]. 金刚石与磨料磨具工程,2001,123(3):5-6. LAN Xionghou,WANG Jixian,GAO Hang. Present Condition and development of the research on the grinding temperature theory[J]. Diamond &Abrasives Engineering,2001,123(3):5-6.
[14] 任敬心,华定安. 磨削原理[M]. 北京:电子工业出版社,2011. REN Jingxin,HUA Dingan. Grinding principle[M]. Beijing:Electronic Industry Press,2011.
[15] 朱鹏飞,刘娟. 成形磨齿温度场的有限元分析与验证[J]. 机床与液压,2017,45(5):155-159. ZHU Pengfei,LIU Juan. FEA and verification of temperature field in gear form grinding[J]. Machine Tool & Hydraulics,2017,45(5):155-159.
[16] 朱鹏飞,贾佳. 不同磨削工况下成形磨齿温度场的研究[J]. 现代制造技术与装备,2016(6):23-24. ZHU Pengfei,JIA Jia. Research on temperature field of gear form grinding between different grinding conditions[J]. Modern Manufacturing Technology and Equipment,2016(6):23-24.
[17] 张魁榜,韩江,夏链,等. 齿轮成形磨削加工热力耦合数值仿真研究[J]. 合肥工业大学学报,2015(10):1297-1302. ZHANG Kuibang,HAN Jiang,XIA Lian,et al. Numerical simulation of thermo-mechanical coupling of gear form grinding process[J]. Journal of Hefei University of Technology,2015(10):1297-1302.
[18] 王杰. 成形磨齿表面完整性仿真与试验研究[D]. 南京:南京工业大学,2016. WANG Jie. Simulation and experimental study on surface integrity of formed grinding teeth[D]. Nanjing:Nanjing University of technology,2016.
[19] 田欣利,王龙,刘谦,等. 20CrMnTi钢齿面磨削力模型构建与分析[J]. 机械工程学报,2018,54(3):227-232. TIAN Xinli,WANG Long,LIU Qian,et al. Construction and analysis of grinding force model of 20CrMnTi steel tooth surface[J]. Journal of Mechanical Engineering,2018,54(3):227-232.
[20] 田欣利,王龙,刘谦,等. 基于微晶刚玉磨粒切削的20CrMnTi齿轮钢磨削机理研究[J]. 制造技术与机床,2017(6):80-84. TIAN Xinli,WANG Long,LIU Qian,et al. Research on grinding mechanism of 20CrMnTi steel based on micro crystalline corundum grit cutting[J]. Manufacturing Technology & Machine Tool,2017(6):80-84.

成形法磨削齿轮的磨削温度模型构建与分析

Construction and Analysis of Grinding Temperature Model for Gear Processed by Form Grinding Technology

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	丁文锋, 赵俊帅, 张洪港, 赵彪, 司文元, 宋强, 黄庆飞. 齿轮高效精密磨削加工及表面完整性控制技术研究进展[J]. 机械工程学报, 2024, 60(7): 350-373.
[2]	魏静, 刘指柔, 魏海波, 徐子扬. 高速薄辐板齿轮传动节径型振动位移与动应变时空变换方法[J]. 机械工程学报, 2024, 60(5): 70-80.
[3]	魏永峭, 张晋, 王少江, 漆小虎, 郭瑞, 杨海江. 变双曲圆弧齿线圆柱齿轮传动界面磨损规律及敏感性分析[J]. 机械工程学报, 2024, 60(5): 81-94.
[4]	师陆冰, 张志宏, 闫晓青, 汤伟毕, 裴帮, 刘忠明. 三峡升船机齿轮齿条运行载荷与疲劳寿命研究[J]. 机械工程学报, 2024, 60(5): 119-129.
[5]	邵海东, 林健, 闵志闪, 明宇航. 分布外样本干扰下基于改进半监督原型网络的齿轮箱跨域故障诊断[J]. 机械工程学报, 2024, 60(4): 212-221.
[6]	刘怀举, 陈地发, 朱才朝, 吴吉展, 魏沛堂. 齿轮弯曲疲劳的研究进展与发展趋势[J]. 机械工程学报, 2024, 60(3): 83-108.
[7]	雷震, 姜宏, 章翔峰, 李军, 孔艺一, 白宇. 行星齿轮系统齿裂纹演化分析[J]. 机械工程学报, 2024, 60(19): 101-115.
[8]	朱永超, 朱才朝, 谭建军, 冉峯, 宋朝省. 考虑数据特征差异的风电齿轮箱群组健康状态预测研究[J]. 机械工程学报, 2024, 60(18): 64-75.
[9]	代鹤, 罗顺安, 龙新华, 李元, 訾斌. 齿轮轴孔位置误差作用下行星齿轮啮合相位波动及其统计特性预测[J]. 机械工程学报, 2024, 60(15): 123-133.
[10]	曹杰, 任尊松, 查浩, 徐宁, 杨超. 高速动车组齿轮箱轴承载荷特性研究[J]. 机械工程学报, 2024, 60(15): 173-184.
[11]	袁晓明, 庞浩东, 高鸿发, 侯书博, 郝秀红. 磁场调制型磁齿轮研究综述[J]. 机械工程学报, 2024, 60(14): 347-363.
[12]	刘华开, 丁康, 何国林, 李巍华, 林慧斌. 联合故障机理和卷积神经网络的齿轮剩余使用寿命预测方法研究[J]. 机械工程学报, 2024, 60(12): 116-125.
[13]	温楷儒, 陈祝云, 黄如意, 李东鹏, 李巍华. 基于可解释时空图卷积网络的多传感数据融合诊断方法[J]. 机械工程学报, 2024, 60(12): 158-167.
[14]	徐子扬, 魏静, 魏海波, 戚勍, 信琦, 刘指柔, 张玉杰. 薄辐板齿轮柔性化动力学模型与行波共振表征[J]. 机械工程学报, 2024, 60(11): 296-308.
[15]	解忠良, 焦见, 杨康. 航空发动机齿轮泵轴承润滑及抗偏载特性分析[J]. 机械工程学报, 2023, 59(9): 198-211.