多生物效应技术实现方法研究

doi:10.3901/JME.2016.09.129

机械工程学报 ›› 2016, Vol. 52 ›› Issue (9): 129-141.doi: 10.3901/JME.2016.09.129

多生物效应技术实现方法研究

刘伟^{1, 2}, 曹国忠^{1, 2}, 檀润华^{1, 2}, 于菲^{1, 2}

1. 河北工业大学机械工程学院天津 300130;
2. 河北工业大学国家技术创新方法与实施工具工程技术研究中心天津 300130

出版日期:2016-05-05 发布日期:2016-05-05
作者简介:刘伟,男,1987年出生,博士研究生。主要研究方向为产品创新设计理论及应用。E-mail：lwofhebut@126.com;曹国忠(通信作者),男,1974年出生,博士,教授。主要研究为产品创新设计理论及应用。E-mail：caoguozhong@hebut.edu.cn;檀润华,男,1958年出生,博士,教授,博士研究生导师。主要研究方向为产品创新设计理论及应用。E-mail：rhtan@hebut.edu.cn ;于菲,女,1986年出生,博士,讲师。主要研究方向为产品创新设计理论及应用。E-mail：yufeijixie3ban@hebut.edu.cn
基金资助:
国家自然科学基金(51275153,51475137)和科技基础性工作专项 (2013IM030400)资助项目

Research on Measures to Technical Realization of Multi Biological Effects

LIU Wei, CAO Guozhong, TAN Runhua, YU Fei

1.School of Mechanical Engineering, Hebei University of Technology, Tianjin 300130;
2. National technological Innovation Method and Tool Engineering Research Center, Hebei University of Technology, Tianjin 300130

Online:2016-05-05 Published:2016-05-05

摘要/Abstract

摘要： 经亿万年进化的生物已经具备了完善的结构、性状、原理和行为等生物特性,这些特性能为现实多种复杂问题提供有效解决机制。生物为产品设计尤其是仿生设计提供了原始素材,是创新的灵感之源。为充分利用已知的生物原型,进行系统化的产品仿生技术结构设计。建立多生物效应的描述模型,基于灰色聚类提出了生物—技术系统的特征聚类方法;研究生物功能技术实现的类比方法,提出了基于属性的生物-技术功能映射模型及多生物效应驱动的产品原理解构建过程,给出了基于特征聚类的多生物效应技术实现方式;集成上述研究成果形成了面向产品系统设计的多生物效应技术求解模型,并以纽扣电池扣圈装置创新设计为例,验证了本方法的有效性。

关键词: 创新方法, 电池设备, 多生物效应, 特征聚类

Abstract: After evolution of hundreds of millions years, the organism has obtained features such as the optimal structure, character, principle and behavior to adapt to their living environment. These features provide effective solutions mechanisms to all kinds of complicated problems. Organism provides the raw material for product design, especially the bionic design, which can be the source of inspiration. To make full use of existing human biological prototype to conduct systematically product bionic technology structure design. Descriptive model for multi bionic is established and combining the gray feature cluster method then biology-technology feature cluster method is proposed. Provide the analogy method of biological function, technology function and biological - technology function mapping model and establishment process of products principle solution based on multi bionic based on attribute, proposed implementation of multi biological effects technology based on feature cluster. Combine the above research results to establish the product system design-oriented multi biological effects technology solving model. Finally, the validity of the methodology is proved by innovation design of button battery buckle ring device.

Key words: battery equipment, feature cluster, innovative method, multi biological effects

中图分类号:

TH122

刘伟, 曹国忠, 檀润华, 于菲. 多生物效应技术实现方法研究[J]. 机械工程学报, 2016, 52(9): 129-141.

LIU Wei^{1, 2}, CAO Guozhong^{1, 2}, TAN Runhua^{1, 2}, YU Fei^{1, 2}. Research on Measures to Technical Realization of Multi Biological Effects[J]. Journal of Mechanical Engineering, 2016, 52(9): 129-141.

参考文献

[1] BENYUS J M．Biomimicry：Innovation inspired by nature[M]．New York：Harper Collins Publishers Inc, 2002.
[2] SHU L,UEDA K,CHEONG H． Biologically inspired design[J]．CIRP Annals-Manufacturing Technology , 2011,60：673-693.
[3] 岑海堂,陈五一．小型翼结构仿生设计与试验分析[J]．机械工程学报,2009,45(3)：286-290.
CEN Haitang,CHEN Wuyi．Structural bionics design and experimental analysis for small wing[J]． Journal of Mechanical Engineering,2009,45(3)：286-290.
[4] ARTHUR B. The structure of invention[J]. Research Policy,2007,36：274-287.
[5] 高飞,肖刚,潘双夏,等．产品功能模块划分方法[J]．机械工程学报,2007,43(5)：29-35．
GAO Fei,XIAO Gang, PAN Shuangxia,et al．Method of product function module partition[J]．Journal of Mechanical Engineering,2007,43(5)：29-35．
[6] 张德远,蔡军,李翔,等．仿生制造的生物成形方法[J]．机械工程学报,2010,46(5)：88-92．
ZHANG Deyuan,CAI Jun,LI Xiang,et al．Bioforming methods of bionic manufacturing[J]． Journal of Mechanical Engineering,2010,46(5)：88-92．
[7] Biomimicrytaxonomy[EB/OL]．[2015-01-02]．http:// asknature.org/aof/browse.
[8] VINCENT J,BOGATYREVA O,PAHL A,et al．Putting biology in triz：Biological effect database[J]．Creativity and innovation management,2005,14(1)：66-72．
[9] HELMS M, VATTAM S,GOEL A．Biologically inspired design: Process and products[J]．Design Studies, 2009,30(5)：606-622.
[10] CHIU I,SHU L,Bridging cross-domain terminology for biomimetic design[C] // Design Engineering Technical Conf. September 24-28,2005,Long Beach,CA：Proc. ASME Int.,2005：673-693.
[11] 任露泉,梁云虹．生物耦合及其分类学与特征规律研究[J]．中国科学：技术科学,2010,40(1)：5-13．
REN Luquan,LIANG Yunhong．Biological couplings：Classification and characteristic rules[J]．Sci. China, Tech. Sci.,2010,40(1)：5-13．
[12] 任露泉,梁云虹．生物耦合功能特性及其实现模式[J]．中国科学：技术科学,2010,40(3)：223-230．
REN Luquan,LIANG Yunhong．Biological couplings： Function characteristics and implementation mode[J]．Sci. China,Tech Sci.,2010,40(3)：223-230.
[13] 任露泉,梁云虹．生物耦合生成机制[J]. 吉林大学学报,2011,41(5)：1348-1357.
REN Luquan,LIANG Yunhong．Generation mechanism of biological coupling[J]．Journal of Jilin University,2011,41(5)：1348-1357．
[14] 张曙．技术创新──企业发展的原动力[J]．机械工程学报,2000,36(1)：2-6, 23.
ZHANG Shu. Innovation is original power for enterprise development[J]．Journal of Mechanical Engineering,2000,36(1)：2-6, 23．
[15] 杨晓西,罗礼卿．21世纪技术创新的模式探讨[J]．华南理工大学学报,2002,30(11)：36-40．
YANG Xiaoxi,LUO Liqing．Inquiry into the technical innovation patterns in the 21stcentury[J]. Journal of South China University of Technology,2002,30(11)：36-40．
[16] 陈月梅,徐康宁．技术特性与企业技术创新模式选择[J]．技术经济与管理研究,2014(3)：19-23．
CHEN Yuemei, XU Kangning． Influence of different characteristics of technology to innovation Patterns of enterprise [J]． Technoeconomics & Management Research,2014(3)：19-23．
[17] ASOK G,BHATTA S．Design patterns：A unit of analogies transfer in creative design[J]．Advanced Engineering Informatics,2004,18(2)：85-94．
[18] 赵华,曹国忠．基于生物效应的概念设计过程研究[J]．机械设计与研究,2011,27(3)：105-110.
ZHAO Hua,CAO Guozhong．Research on conceptual design based on biological effects[J]．Machine Design & Research,2011,27(3)：105-110．
[19] ALTSHULLER G. The innovation algorithm triz：Systematic innovation and technical creativity [M]. Worcester：Technical Innovation Center Inc, 1999.
[20] 熊和金,陈绵云,瞿坦．灰色聚类的几个问题[J]．系统工程与电子技术,1999,21(5)：7-10．
XIONG Hejin,CHEN Jinyun, QU Tan．Some questions on grey clustering[J]．Systems Engineering and Electronics,1999,21(5)：7-10．
[21] 邱学军．灰色聚类关联分析法及其应用[J]．系统工程理论与实践,1995,15(1)：15-21．
QIU Xuejun.The grey cluster relation analysis method and its applications[J]． Systems Engineering -Theory & Practice, 1995,15(1)：15-21．
[22] 刘旺盛,杨帆,李茂青,等．需求可拆分车辆路径问题的聚类求解算法[J]．控制与决策,2012,27(4)：535-541．
LIU Wangsheng,YANG Fan,LI Maoqing,et al．Clustering algorithm for split delivery vehicle routing problem[J]．Control and Decision,2012,27(4)：535-541．
[23] 贺玲,吴玲达,蔡益朝．数据挖掘中的聚类算法综述[J]．计算机应用研究,2007,24(1)：10-13．
HE Ling,WU Lingda,CAI Yichao．Survey of clustering algorithms in data mining[J]．Application Research of Computers,2007, 24(1)：10-13.
[24] 肖新平．灰色聚类分析法的改进及其应用[J]．系统工程,1996,14(2)：71-74,77．
XIAO Xinping．An improved method of grey cluster and its applications[J]． Systems Engineering,1996,14(2)：71-74,77．
[25] 曹国忠,檀润华,孙建广．基于扩展效应模型的功能设计过程及实现[J]．机械工程学报,2009,45(7)：157-167．
CAO Guozhong,TAN Runhua,SUN Jianguang．Process and realization of functional design based onextended-effect model[J]．Journal of Mechanical Engineering,2009,45(7)：157-167．
[26] 刘伟．多生物效应驱动的产品创新原理解构建研究[D]．天津：河北工业大学, 2014．
LIU Wei． Research on products innovation principle solution driven by multi biological effects[D]．Tianjin：Hebei University of Technology, 2014．

多生物效应技术实现方法研究

Research on Measures to Technical Realization of Multi Biological Effects

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价

[1]	郭鑫, 赵武, 王杰, 王晨, 张凯, 陈领. 面向创新设计的工艺设计知识模型及检索方法研究[J]. 机械工程学报, 2017, 53(15): 66-72.
[2]	李彦, 刘红围, 李梦蝶, 袁萍. 设计思维研究综述[J]. 机械工程学报, 2017, 53(15): 1-20.
[3]	刘助柏. 论知识创新能力[J]. , 1999, 35(1): 6-10.