• CN：11-2187/TH
  • ISSN：0577-6686
机械工程学报

机械工程学报 ›› 2017, Vol. 53 ›› Issue (11): 203-210.doi: 10.3901/JME.2017.11.203

• 绿色制造技术 • 上一篇    

扫码分享

基于GO法的机床再制造工艺过程可靠性分析方法

杜彦斌1, 李聪波2, 刘世豪3   

  1. 1. 重庆工商大学制造装备机构设计与控制重庆市重点实验室 重庆 400067;
    2. 重庆大学机械传动国家重点实验室 重庆 400030;
    3. 海南大学机电工程学院 海口 570228
  • 出版日期:2017-06-05 发布日期:2017-06-05
  • 作者简介:

    杜彦斌(通信作者)，男，1982年出生，博士，副教授。主要研究方向为机械装备再制造和装备可靠性分析。

    E-mail：duzi2009@163.com

  • 基金资助:
    * 国家自然科学基金(51305470)、重庆市教委科学技术研究 (KJ1500613; KJ1400635)和重庆工商大学科研平台开放课题(1456036)资助项目; 20160811收到初稿，20170125收到修改稿;

Reliability Assessment Method of Remanufacturing Process for Machine Tools Based on GO Method

DU Yanbin1, LI Congbo2, LIU Shihao3   

  1. 1. Chongqing Key Laboratory of Manufacturing Equipment Mechanism Design and Control， Chongqing Technology and Business University， Chongqing 400067;
    2. State Key Laboratory of Mechanical Transmission， Chongqing University， Chongqing 400030;
    3. College of Mechanical and Electrical Engineering， Hainan University， Haikou 570228
  • Online:2017-06-05 Published:2017-06-05

PDF

416

摘要：

再制造工艺过程的稳定性及可靠性是保证并提高再制造机床可靠性的基础。针对废旧机床回收、拆解、清洗、检测与分类、再加工、再装配以及再制造机床调试检验等再制造工艺过程对再制造机床可靠性的影响，提出机床再制造工艺过程可靠性的概念;在分析机床再制造工艺过程可靠性影响因素的基础上，提出一种基于GO法的机床再制造工艺过程可靠性分析方法，并建立机床再制造工艺过程可靠性GO图模型及其概率模型;最后，结合某机床再制造企业滚齿机再制造工艺过程，对所提出的方法进行应用验证。

关键词: GO法, 可靠性, 再制造

Abstract:

Stability and reliability of remanufacturing process are foundation to enhance the reliability of remanufactured machine tools. Remanufacturing processes including machine tools recycling, disassembly, cleaning, inspection and sorting, reconditioning, reassembly as well as debugging and testing of remanufactured machine tools have great influence on the reliability of remanufactured machine tools. For this, reliability of remanufacturing process for machine tools is defined and the influence factors of reliability of remanufacturing process are analyzed. Then, a reliability assessment method of remanufacturing process for machine tools based on GO method is proposed. In addition, the GO reliability model and probability model of remanufacturing process for machine tools are established. Finally, the proposed method is applied to remanufacturing process of gear hobbing machine by one remanufacturer of used machine tools.

Key words: goal oriented (GO) method, reliability, remanufacturing

版权所有 © 2019 《机械工程学报》编辑部 | 京ICP备05055788号-30