[1] LEE Y S,CHANG T C. Automatic cutter selection for 5-axis sculptured surface machining[J]. International Journal of Production Research,1996,34(4): 977-998. [2] GENG L,ZHANG Y F,FUH J Y H. A neural network based approach to 5-axis tool-path length estimation for optimal multi-cutter selection[J]. Computer-Aided Design and Applications,2011,8(2):301-313. [3] LI LL,ZHANG Y F. Cutter selection for 5-axis milling based on surface decomposition[J]. International Conference on Control,Automation,Robotics,2004(3):1863-1868. [4] DING X,FUH J,LEE K. Interference detection for 3-axis mold machining[J]. Computer-Aided Design,2001,33(8:561-569. [5] JENSEN CG,RED WE,PI J. Tool selection for five-axis curvature matched machining[J]. Computer-Aided Design,2002,34(3):251-266. [6] LI LL,ZHANG Y F. Cutter selection for 5-axis milling of sculptured surfaces based on accessibility analysis[J]. International Journal of Production Research,2006,44(16):3303-23. [7] GLAESER G,WALLNER J. Collision-free 3-axis milling and selection of cutting tools[J]. Computer-Aided Design,1999,31:225-232. [8] YANG D,HAN Z. Interference detection and optimal tool selection in 3-axis NC machining of free-form surfaces[J]. Computer-Aided Design,1999,31:303-315. [9] MORIMOTO K,INUI M. A GPU based algorithm for determining the optimal cutting direction in deep mold machining[J]. International symposium on assembly and manufacturing,2007:203-208. [10] LASEMI A,XUE Deyi,GU Peihua. Recent development in CNC machining of freeform surfaces:A state-of-the-art review[J]. Computer-Aided Design,2010,42(7):641-654. [11] RAO A,SARMA R. On local gouging in five-axis sculptured surface machining using flat-end tools[J]. Computer-Aided Design,2000,32(7):409-420. [12] WANG N,TANG K. Automatic generation of gouge-free and angular velocity-compliant five-axis tool path[J]. Computer-Aided Design,2007,39(10):841-852. [13] 尹周平,丁汉,熊有伦. 基于可视锥的可接近性分析方法及其应用[J]. 中国科学,2003. 33(11):979-989. YIN Zhouping,DING Han,XIONG Youlun. Accessibility analysis algorithm and application based on visibility cone[J]. Science China:Technological Sciences,2003,33(11):979-989. [14] CHEN Li,XU Ke,TANG Kai. Collision-free tool orientation optimization in five-axis machining of bladed disk[J]. Journal of Computational Design and Engineering,2015,13(4):197-205. [15] 张定华. 多轴NC编程系统的理论、方法和接口研究[D]. 西安:西北工业大学,1989. ZHANG Dinghua. Study on the theory,method and interface for multi-axis NC programming system[D]. Xi'an:Northwestern Polytechnical University:1989. [16] 王晶,张定华,吴宝海,等. 基于临界约束的四轴数控加工刀轴优化方法[J]. 机械工程学报,2012,48(17):114-120. WANG Jing,ZHANG Dinghua,WU Baohai,et al. Tool orientation optimization method in four-axis CNC machining based on critical constraints[J]. Journal of Mechanical Engineering,2012,48(17):114-120. [17] 易兵,刘振宇,谭建荣. 基于高斯映射的CAD网格法向聚类分割方法[J]. 机械工程学报,2015,51(7):115-123. YI Bing,LIU Zhenyu,TAN Jianrong. An algorithm for segmenting CAD meshes based on the Gaussian map[J]. Journal of Mechanical Engineering,2015,51(7):115-123. |