[1] TIBERT A G. Optimal design of tension truss antennas[C]//44thAIAA/ASME/ASCE/AHS Structures,Structural Dynamics,and Materials Conference,April 7-10,2003,Norfolk,Virginia. United States:AIAA,2003:2051-2060. [2] LIU H P,LUO A N,ZHANG T M,et al. Vibration analysis of circle truss of the astromesh deployable antenna[C]//3rd International Conference on Measuring Technology and Mechatronics Automation,January 6-7,2011,Shanghai,China. United States:IEEE Computer Society,2011:1116-1119. [3] 杨癸庚,杨东武,杜敬利,等. 一种基于力密度的网状可展开天线索网结构初始形态设计方法[J]. 机械工程学报,2016,52(11):34-41. YANG Guigeng,YANG Dongwu,DU Jingli,et al. Method for deployable mesh antenna cable network structures' form-finding design based on force density[J]. Journal of Mechanical Engineering,2016,52(11):34-41. [4] 段宝岩. 大型空间可展开天线的研究现状与发展趋势[J]. 电子机械工程,2017,33(1):1-14. DUAN Baoyan. The state-of-the-art and development trend of large space-borne deployable antenna[J]. Electro-Mechanical Engineering,2017,33(1):1-14. [5] LI T J,JIANG J,DENG H Q,et al. Form-finding methods for deployable mesh reflector antennas[J]. Chinese Journal of Aeronautics,2013,26(5):1276-1282. [6] TANAKA H,NATORI M C. Shape control of space antennas consisting of cable networks[J]. Acta Astronautica,2004,55(3-9):519-527. [7] YANG G G,DUAN B Y,ZHANG Y Q,et al. Uniform-tension form-finding design for asymmetric cable-mesh deployable reflector antennas[J]. Advances in Mechanical Engineering,2016,8(9):1-7. [8] Wang Z W,Li T J,Cao Y Y. Active shape adjustment of cable net structures with pzt actuators[J]. Aerospace Science and Technology,2013,26(1):160-168. [9] 狄杰建,段宝岩,杨东武,等. 索网式星载展开天线结构纵向调整索数及其初始张力的优化[J]. 机械工程学报,2005,41(11):153-157. DI Jiejian,DUAN Baoyan,YANG Dongwu,et al. Optimization on initial cable tensions and number of cables for a cablenet deployable spaceborne antenna[J]. Journal of Mechanical Engineering,2005,41(11):153-157. [10] NATORI M C,HIRABAYASHI H,OKUIZUMI N,et al. A structure concept of high precision mesh antenna for space VLBI observation[C]//43rd AIAA/ASME/ASCE/AHS/ASC Structures,Structural Dynamics,and Materials Conference,April 22-25,2002,Denver,Colorado. United States:AIAA,2002:1-8. [11] 穆晓凯,孙清超,孙克鹏,等. 基于载荷作用的柔性体三维公差建模及精度影响分析[J]. 机械工程学报,2018,54(6):39-48. MU Xiaokai,SUN Qingchao,SUN Kepeng,et al. Three-dimensional tolerance modeling and precision analysis of flexible body based on the assembly load[J]. Journal of Mechanical Engineering,2018,54(6):39-48. [12] 刘荣强,田大可,邓宗全,等. 多模块构架式空间可展开天线背架的模态分析[J]. 北京理工大学学报,2011,31(6):685-690. LIU Rongqiang,TIAN Dake,DENG Zongquan,et al. Modal analysis of truss structure for deployable truss antenna with multi-module[J]. Transactions of Beijing Institute of Technology,2011,31(6):685-690. [13] 张文辉,叶晓平,季晓明. 空间微重力地面模拟装置基于神经滑模的自适应补偿控制[J]. 机械工程学报,2014,50(15):68-72. ZHANG Wenhui,YE Xiaoping,JI Xiaoming. Adaptive compensation control for ground simulation equipment of space microgravity environment base on neural sliding-model[J]. Journal of Mechanical Engineering,2014,50(15):68-72. [14] 王聪,孙炜,卜德旭,等. 基于惯性导航与立体视觉的风管清扫机器人同时定位与地图创建方法[J]. 机械工程学报,2013,49(23):59-67. WANG Cong,SUN Wei,BU Dexu,et al. Simultaneous localization and mapping research for air-duct cleaning robot based on inertial navigation and stereo vision[J]. Journal of Mechanical Engineering,2013,49(23):59-67. [15] 朱兴龙. 基于立体视觉和激光标记的空间物体位姿的快速定位算法[J]. 机械工程学报,2004,40(7):161-165. ZHU Xinglong. Quick measurement algorithms of position and pose of spatial object by CCD images based on stereo vision and laser token[J]. Journal of Mechanical Engineering,2004,40(7):161-165. [16] TIBERT G. Deployable tensegrity structures for space applications[D]. Stockholm,Sweden:Royal Institute of Technology Department of Mechanics,2002. [17] 狄杰建. 索网式可展开天线结构的反射面精度优化调整技术研究[D]. 西安:西安电子科技大学,2005. DI Jiejian. On optimal adjusting technology for reflector precision of the cable-net deployable antenna structure[D]. Xi'an:Xidian University,2005. [18] Kishimoto N,Natori M C,Higuchi K,et al. New deployable membrane structure models inspired by morphological changes in nature[C]//47th AIAA/ASME/ASCE/AHS/ASC Structures,Structural Dynamics,and Materials Conference,May 1-4,2006,Newport,Rhode Island. United States:AIAA,2006:3722-3725. |