• CN：11-2187/TH
  • ISSN：0577-6686
机械工程学报

›› 2004, Vol. 40 ›› Issue (11): 98-102.

• 论文 • 上一篇    下一篇

扫码分享

泡沫铝填充帽型结构轴向压缩吸能特性的试验研究

王青春;范子杰;宋宏伟;桂良进;王政红;付自来   

  1. 清华大学汽车安全与节能国家重点实验室;洛阳船舶材料研究所
  • 发布日期:2004-11-15

EXPERIMENTAL STUDIES ON THE AXIAL CRUSHING BEHAVIORS OF ALUMINIUM FOAM-FILLED HAT SECTIONS

Wang Qingchun;Fan Zijie;Song Hongwei;Gui Liangjin;Wang Zhenghong;Fu Zilai   

  1. State Key Laboratory of Automotive Safety and Energy, Tsinghua University Luoyang Ship Material Research Institute
  • Published:2004-11-15

PDF

159

摘要： 通过试验方法研究了泡沫铝填充帽型结构准静态压溃时的吸能特性。首先，进行了泡沫铝空心帽型结构以及泡沫铝填充帽型结构的轴向压缩试验；然后，根据试验结果，对泡沫铝填充帽型结构的轴向吸能特性进行了分析，并与空心帽型结构进行了比较。结果表明，填充泡沫铝之后，帽型结构的轴向压缩稳定性和吸能特性有了很大的提高。在吸收的能量一定时，泡沫铝填充能够减少吸能结构所需要的质量。

关键词: 帽型结构, 泡沫铝, 吸能特性

Abstract: Quasi-static axial compression tests are carried out to study the crushing behaviors of the aluminum foam filled hat sections. First, the axial compression tests of the empty hat sections, aluminum foam and the aluminum foam filled hat sections are carried out; then, based upon the test results, the crushing behaviors of the aluminum foam filled hat sections are analyzed. It is found that, aluminum foam filling can greatly increase the energy absorption abilities of the hat sections. Compared with the non-filled structures, aluminum foam filled structures need less mass to absorb the specified energy.

Key words: Aluminum foam, Crushing behaviors, Hat section

中图分类号: 

版权所有 © 2019 《机械工程学报》编辑部 | 京ICP备05055788号-30