[1] 王宝元,刘朋科,衡钢,等. 自行火炮工作模态分析试验技术[J]. 兵工学报, 2009, 30(7):253-256. WANG Baoyuan, LIU Pengke, HENG Gang, et al. Operational modal analysis experimental technique used for self-propelled gun[J]. Acta Armam, 2009, 30(7):253-256. [2] 王文平,项昌乐. 某型复杂变速器壳体的模态研究[J]. 汽车工程, 2007, 29(8):673-676. WANG Wenping, XIANG Changle. Modal analysis of a complicated gearbox housing[J]. Automotive Engineering, 2007, 29(8):673-676. [3] 楼江雷,唐进元,陈思雨,等. 基于LMS工作模态测试的齿轮箱性能分析[J]. 机械传动, 2002, 36(3):4-7. LOU Jianglei, TANG Jinyuan, CHEN Siyu,et al. Analysis of gearbox performance based on LMS operating modal test[J]. Journal of Mechanical Transmission, 2002, 36(3):4-7. [4] 王卓,闫维明,叶列平. 网壳结构运行模态分析的模型试验[J]. 清华大学学报, 2011, 51(6):755-759. WANG Zhuo, YAN Weiming, YE Lieping. Experimental study of the operational modal analysis of latticed domes[J]. Journal of Tsinghua University, 2011, 51(6):755-759. [5] 张义民,张守元,李鹤,等. 运行模态分析中固有模态和谐波模态区分方法研究[J]. 振动与冲击,2009,28(1):64-67. ZHANG Yimin, ZHANG Shouyuan, LI He, et al. Modes in operational modal analysis[J]. Journal of Vibration and Shock, 2009, 28(1):64-67. [6] ZHANG G W, MA J H, CHEN Z, et al. Automated eigensystem realisation algorithm for operational modal analysis[J]. Journal of Sound and Vibration, 2014, 333(15):3550-3563. [7] EUGEN N, FRANK J, AKBAR A K, et al. Fully automated operational modal analysis using multi-stage clustering[J]. Mechanical Systems and Signal Processing, 2017, 84:308-323. [8] 汤宝平,章国稳,陈卓. 基于谱系聚类的随机子空间模态参数自动识别[J]. 振动与冲击, 2012, 31(10):92-96. TANG Baoping, ZHANG Guowen, CHEN Zhuo. Automatic stochastic subspace identification of modal parameters based on hierarchical clustering method[J]. Journal of Vibration and Shock, 2012, 31(10):92-96. [9] EDWIN R, JEROEN H, GUIDO D R, et al. Fully automated (operational) modal analysis[J]. Mechanical Systems and Signal Processing, 2012, 29(S1):228-250. [10] FAN J L, ZHANG Z Y, HUA H X. Data processing in subspace identification and modal parameter identification of arch bridge[J]. Mechanical Systems and Signal Processing, 2007, 21(4):1674-1689. [11] PELIN G B. Automation of the stabilization diagrams for subspace-based system identification[J]. Expert Systems with Applications, 2011, 38(12):14390-14397. [12] SCIONTI M, LANSLOTS J P. Stabilization diagrams:pole identification using fuzzy clustering techniques[J]. Advances in Engineering Software, 2005, 36:768-779. [13] FILIPE M, ALVARO C, ELSA C. Online automatic identification of the modal parameters of a long span arch bridge[J]. Mechanical Systems and Signal Processing, 2009, 23(2):316-329. [14] CARLO R, GIOVANNI F. Development and validation of an automated operational modal analysis algorithm for vibration-based monitoring and tensile load estimation[J]. Mechanical Systems and Signal Processing, 2015, 60-61:512-534. [15] 章国稳. 环境激励下结构模态参数自动识别与算法优化[D]. 重庆:重庆大学, 2012. ZHANG Guowen. Modal parameter automatic identification for structures under ambient excitation and algorithm optimization[D]. Chongqing:Chongqing University, 2012. [16] 汤宝平,章国稳,孟利波. 基于模态能量的随机子空间虚假模态剔除[J]. 华中科技大学学报, 2012, 40(3):94-98. TANG Baoping, ZHANG Guowen, MENG Libo. Modal energy-based distinguishing spurious mode obtained from stochastic subspace identification[J]. Journal of Huazhong University of Science and Technology, 2012, 40(3):94-98. [17] 肖祥, 任伟新. 实时工作模态参数数据驱动随机子空间识别[J]. 振动与冲击, 2009, 28(8):148-206. XIAO Xiang, REN Weixin. Improved data-driven stochastic subspace identification of online operational modal parameters[J]. Journal of Vibration and Shock, 2009, 28(8):148-206. |