• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2022, Vol. 58 ›› Issue (4): 120-154.doi: 10.3901/JME.2022.04.120

• 可再生能源与工程热物理 • 上一篇    下一篇

扫码分享

过滤-旋流耦合技术在非均相分离中的研究及应用

刘洋1,2, 赵立新1,2, 张爽1,2, 刘琳1,2, 徐保蕊1,2   

  1. 1. 东北石油大学机械科学与工程学院 大庆 163318;
    2. 黑龙江省石油石化多相介质处理及污染防治重点实验室 大庆 163318
  • 收稿日期:2021-03-05 修回日期:2021-09-09 出版日期:2022-02-20 发布日期:2022-04-30
  • 通讯作者: 赵立新(通信作者),男,1972年出生,博士,教授,博士研究生导师。主要研究方向为以旋流分离和离心分离为特色的多相介质分离技术、流体机械及工程技术。
  • 作者简介:刘洋,男,1983年出生,博士研究生。主要研究方向为过滤及旋流分离技术。E-mail:nepuliuyang@hotmail.com;张爽,女,1997年出生,博士研究生。主要研究方向为流体机械及工程技术。E-mail:793879419@qq.com;刘琳,男,1992年出生,博士研究生。主要研究方向为旋流分离技术及油田水处理。E-mail:liulin@stu.nepu.edu.cn;徐保蕊,男,1985年出生,博士,讲师。主要研究方向为油田采出液水处理技术、旋流分离等流体机械工程技术。E-mail:xubaorui2009@126.com
  • 基金资助:
    国家重点研发计划"政府间国际科技创新合作"重点专项(2018YFE 0196000)、黑龙江省自然科学基金(重点项目)(ZD2020E001)和东北石油大学"龙江学者"配套支持计划(lj201803)资助项目。

Research and Application of Filtering-swirl Coupling Technology in Heterogeneous Separation

LIU Yang1,2, ZHAO Lixin1,2, ZHANG Shuang1,2, LIU Lin1,2, XU Baorui1,2   

  1. 1. School of Mechanical Science and Engineering, Northeast Petroleum University, Daqing 163318;
    2. Heilongjiang Key Laboratory of Petroleum and Petrochemical Multiphase Treatment and Pollution Prevention, Daqing 163318
  • Received:2021-03-05 Revised:2021-09-09 Online:2022-02-20 Published:2022-04-30

摘要: 过滤-旋流耦合分离装置作为一种新型分离设备,将旋流分离与过滤相结合,既充分地发挥传统水力旋流器的快速、高效、旋转涡流运动等优点,又通过深度过滤而提高传统水力旋流器的分离精度。从其各种形式的结构特点和工作原理的不同出发,阐述一些具有代表性和实用性的内置式、外置式、壁面过滤式分离器的研究成果。分别针对入口、旋流腔、溢流管、锥段、底流管、过滤材料等部分的结构参数,以及从针对入口流量、压力降和压降比、固体颗粒特性、流体特性、分流比/底流率、增压方式等操作工况和介质条件的研究现状出发,重点讨论分析过滤-旋流耦合分离装置的结构参数和操作工况在非均相介质分离中的影响情况,并展望将过滤-旋流耦合分离与其他分离工艺相结合,研发新型分离技术与设备将成为过滤-旋流耦合分离技术的潜在研究方向。

关键词: 水力旋流器, 过滤, 耦合, 固-液分离, 气-液分离

Abstract: As a new emerging separation equipment, the filter-cyclone coupling separation device combines cyclone separation with filtration, which not only sufficiently exerted play to the advantages of the traditional hydrocyclone such as rapid, high-efficiency, and swirling vortex motion, but also enhances the separation accuracy of the traditional hydrocyclone with the deep filtering separation. The research results of some representative and practical built-in, external and wall-filtered separators are described from the differences of their various forms of structural characteristics and operating principles. Respectively Starting from the current research status on the structural parameters of the inlet, cyclone cavity, overflow pipe, cone section, underflow pipe, and filter material, etc., as well as on the operating conditions and media conditions such as inlet flow rate, pressure drop and pressure drop ratio, solid particle characteristics, fluid characteristics, split ratio/underflow rate, and booster mode, etc., are discussed and analyzed, focusing on the structural parameters and operating conditions of the filter-cyclone coupling separation device in the non-homogeneous media. Combining filtration-cyclone coupling separation with other separation processes, the development of new separation technologies and equipment will become the potential research direction of filtration-cyclone coupling separation technology.

Key words: hydrocyclone, filtration, coupling, solid-liquid separation, gas-liquid separation

中图分类号: