[1] OGUZHAN Y, NABIL G, GAO J.A repair and overhaul methodology for aeroengine components[J].Robotics and Computer-Integrated Manufacturing, 2010, 26:190-201. [2] 范永升, 黄渭清, 杨晓光, 等.某型航空发动机涡轮叶片服役微观损伤研究[J].机械工程学报, 2019, 55(13):122-128.FAN Yongsheng, HUANG Weiqing, YANG Xiaoguang, et al.Microstructural damage analysis of service turbine blades for an aero-engine[J].Journal of Mechanical Engineering, 2019, 55(13):122-128. [3] 俞辉, 王振忠.航空叶片制造工艺及坐标检测方法分析[J].航空制造技术, 2018, 61(9):64-70.YU Hui, WANG Zhenzhong.Analysis of manufacturing technology and coordinate detection method of aviation blade[J].Aeronautical Manufacturing Technology, 2018, 61(9):64-70. [4] 于卫新, 李淼泉, 胡一曲.材料超塑性和超塑成形/扩散连接技术及应用[J].材料导报, 2009, 23(11):8-14.YU Weixin, LI Miaoquan, HU Yiqu.Materials superplastic and superplastic forming/diffusion bonding technology and applications[J].Materials Reports, 2009, 23(11):8-14. [5] 靳淇超, 汪文虎, 蒋睿嵩, 等.压气机叶片辊轧模具型腔回弹补偿方法研究[J].机械工程学报, 2017, 53(16):148-155.JIN Qichao, WANG Wenhu, JIANG Ruisong, et al.Investigation on springback compensation method for the rolling mold of compressor blade[J].Journal of Mechanical Engineering, 2017, 53(16):148-155. [6] LU Z X, XU C G, PAN Q X, et a1.Automatic method for synchronizing work-piece frames in twin-robot nondestructive testing system[J].Chinese Journal of Mechanical Engineering, 2015, 28(4):860-868. [7] 江健, 郭天太, 吴思源, 等.曲面构件一体化超声自动检测方法研究[J].传感技术学报, 2006, 19(2):383-387.JIANG Jian, GUO Tiantai, WU Siyuan, et al.Research of integrated ultrasonic auto detecting method on curved surfaces[J].Chinese Journal of Sensors and Actuators, 2006, 19(2):383-392. [8] LU Z X, XU C G, ZHAO X Y, et a1.Ultrasonic transmission testing of twin-robot coordinated control[J].IEEE International Conference on Mechatronics & Automation, 2013, 446(16):1256-1260. [9] 张杨, 周晓军, 杨辰龙, 等.基于声束追踪的变厚度曲面工件超声探头位姿规划[J].农业机械学报, 2012, 43(9):230-234.ZHANG Yang, ZHOU Xiaojun, YANG Chenlong, et al.Ultrasonic probe position and orientation planning for curved components with variable thickness based on ultrasonic beam analysis[J].Transactions of the Chinese Society for Agricultural Machinery, 2012, 43(9):230-234. [10] 徐春广, 马朋志, 肖定国, 等.航空发动机叶片机械手无损检测技术[J].航空制造技术, 2019, 62(14):42-48.XU Chunguang, MA Pengzhi, XIAO Dingguo, et al.Nondestructive testing technology for aeroengine blade manipulator[J].Aeronautical Manufacturing Technology, 2019, 62(14):42-48. [11] 赵娜, 李亮玉, 刘杰, 等.飞机叶片焊接修复中的三维测量重构技术[J].焊接学报, 2014, 35(6):73-76.ZHAO Na, LI Liangyu, LIU Jie, et al.A three-dimensional reconstruction methodology for aeroengine blade welding repair[J].Transactions of the China Welding Institution, 2014, 35(6):73-76. [12] BROSED F J, AGUILAR J J, GUILLOMIA D, et al.3D geometrical inspection of complex geometry parts using a novel laser triangulation sensor and a robot[J].Sensors, 2011, 11(1):90-110. [13] MALCOMB J R.Laser profilometry for non-contact automated countersink diameter measurement[J].SAE International Journal of Aerospace, 2014, 7(2):263-268. [14] 汪洋, 马孜, 胡英, 等.新型自由曲面三维激光扫描系统[J].机械工程学报, 2009, 45(11):260-265.WANG Yang, MA Zi, HU Ying, et al.Novel free-form surface 3D laser scanning system[J].Journal of Mechanical Engineering, 2009, 45(11):260-265. [15] 石循磊, 杜坤鹏, 张继文, 等.基于线激光扫描的飞机表面锪窝孔参数提取方法[J].机械工程学报, 2020, 56(8):148-154.SHI Xunlei, DU Kunpeng, ZHANG Jiwen, et al.Method for extracting hole parameters of aircraft surface based on linear laser scanning[J].Journal of Mechanical Engineering, 2020, 56(8):148-154. [16] 赵新玉, 温欣, 段晓敏.检测机械手轨迹突变点识别方法[J].机械工程学报, 2020, 56(18):15-21.ZHAO Xinyu, WEN Xin, DUAN Xiaomin.Recognition method for testing manipulator trajectory change-point[J].Journal of Mechanical Engineering, 2020, 56(18):15-21. |