集中荷载作用下双层弹性悬臂梁动力学分析

doi:10.3901/JME.2021.01.128

机械工程学报 ›› 2021, Vol. 57 ›› Issue (1): 128-137.doi: 10.3901/JME.2021.01.128

扫码分享

集中荷载作用下双层弹性悬臂梁动力学分析

何威¹, 魏彦京²

1. 燕山大学建筑工程与力学学院秦皇岛 066004;
2. 中国科学院大学北京 100049

收稿日期:2019-12-12 修回日期:2020-06-24 出版日期:2021-01-05 发布日期:2021-02-06
通讯作者: 何威(通信作者),男,1976年出生,博士,副教授,硕士研究生导师。主要研究方向为工程力学。E-mail:hewei@ysu.edu.cn
作者简介:魏彦京,男,1992年出生,硕士研究生。主要研究方向为岩土工程。E-mail:weiyanjing17@mails.ucas.ac.cn
基金资助:
国家自然科学基金资助项目（50875230）。

Dynamic Analysis of Two-layered Elastic Cantilever Beam under the Action of Concentrated Load

HE Wei¹, WEI Yanjing²

1. College of Civil Engineering and Mechanics, Yanshan University, Qinhuangdao 066004;
2. University of Chinese Academy of Sciences, Beijing 100049

Received:2019-12-12 Revised:2020-06-24 Online:2021-01-05 Published:2021-02-06

摘要/Abstract

摘要： 通过研究动集中载荷对双层弹性悬臂梁的动力学影响，旨在探讨悬臂式电磁发射装置的轨道及壁板的受力及振动规律。采用双层弹性基础梁理论，对悬臂式双层弹性基础梁在动集中载荷作用下的受力和振动情况进行了分析，将电磁发射装置的轨道及壁板简化为双层弹性悬臂梁力学模型，采用Dirac函数表示运动状态下电枢作用在轨道上的集中力，得出了内梁和外梁的动力学微分方程，应用模态函数正交性，求得了内外梁弯矩和应力的解析解。通过算例，分析了内梁和外梁的动力响应，并在相同条件下应用ANSYS进行了数值模拟，最后将解析解与数值解进行了比较，解析解的可靠性得到验证。将电磁发射装置简化为双层弹性悬臂梁要比单层弹性悬臂梁更加接近实际工况。研究成果有助于电磁发射装置的理论研究，可供相关工程设计参考。

关键词: 悬臂梁, 动力强度分析, 双层弹性悬臂梁, 动集中荷载, ANSYS

Abstract: The dynamic effect of the moving concentrated load on the two-layered elastic cantilever is studied, which aims to investigate the force and vibration of the rails and wall panels of the cantilever electromagnetic device. The research is based on the two-layered elastic cantilever beam theory, analyzes the stress and vibration of two-layered elastic cantilever beam subjected to moving concentrated load, taking the electromagnetic launch device rails and wall panels as a two-layered elastic foundation beam, establishing a mechanical model, using the Dirac function to express the action of concentrated force on the rails due to the armature’s movement, and establishing the dynamic differential equation of upper beam and lower beam. The analytical solution of bending moment and stress of upper and lower beam is obtained according to modal orthogonality. In a case of given motion parameters and structural parameters, the dynamic response of the upper beam and the lower beam are analyzed; then the numerical simulation is carried out under the same conditions by ANSYS. Finally, the practicability of analytical solution is verified by comparisons with the numerical solution. The two-layered elastic cantilever beam model, which is more applicable to the actual working condition than the single-layered elastic cantilever beam model. It will contribute to the theoretical research on the electromagnetic launch device and can be used for reference of the engineering design in related fields.

Key words: cantilever beam, dynamic strength analysis, two-layered elastic cantilever beam, moving concentrated load, ANSYS

中图分类号:

TB121

何威, 魏彦京. 集中荷载作用下双层弹性悬臂梁动力学分析[J]. 机械工程学报, 2021, 57(1): 128-137.

HE Wei, WEI Yanjing. Dynamic Analysis of Two-layered Elastic Cantilever Beam under the Action of Concentrated Load[J]. Journal of Mechanical Engineering, 2021, 57(1): 128-137.

参考文献

[1] TZENG J T. Structural mechanics for electromagnetic railguns[J]. Journal of Transactions on Magnetics,2005,41(1):246-250.
[2] TZENG J T. Dynamic response of electromagnetic railgun due to projectile movement[J]. Journal of Transactions on Magnetics,2003,39(1):472-475.
[3] TZENG J T,SUN W. Dynamic response of cantilevered rail guns attributed to projectile/gun interaction-theory[J]. Journal of Transactions on Magnetics,2006,43(1):207-213.
[4] JOHNSON A J,MOON F C. Elastic waves and solid armature contact pressure in electromagnetic launchers[J]. Journal of Transactions on Magnetics,2006,42(3):422-429.
[5] CHE Yunlong,YUAN Weiqun,XU Weidong,et al. The influence of different constraints and pretightening force on vibration and stiffness in railgun[J]. IEEE Transactions on Plasma Science,2017,45(7):1154-1160.
[6] CAO Bin,GE Xia,GUO Wei,et al. Analysis of rail dynamic deformation during electromagnetic launch[J]. Journal of Transactions on Plasma Science,2017,45(7):1269-1273.
[7] LEE Y H,KIM S H,An S,et al. Dynamic response of an electromagnetic launcher accelerating a C-shaped armature[J]. Journal of Transactions on Plasma Science,2017,45(7):1639-1643.
[8] 张永胜,鲁军勇,谭赛,等. 电磁轨道发射中内弹道动力响应特性分析[J]. 国防科技大学学报,2019,41(4):18-24. ZHANG Yongsheng,LU Junyong,TAN Sai,et al. Analysis of dynamic response of internal ballistics in electromagnetic orbit launch[J]. Journal of National University of Defense Technology,2019,41(4):18-24.
[9] 陈铁宁,白春艳,张益男,等. 电枢运动引起电磁发射轨道的动态响应[J]. 动力学与控制学报,2010,8(4):360-364. CHEN Tiening,BAI Chunyan,ZHANG Yinan,et al. Dynamic response of electromagnetic railgun due to armature movement[J]. Journal of Dynamics and Control,2010,8(4):360-364.
[10] LI Shizhong,CAO Ronggang,ZHOU Yu,et al. Performance analysis of electromagnetic railgun launch system based on multiple experimental data[J]. IEEE Transactions on Plasma Science,2019,47(1):524-534.
[11] YIN Qiang,ZHANG He,LI Haojie,et al. Analysis of in-bore magnetic field in C-shaped armature railguns[J]. Defence Technology,2019,15(1):83-88.
[12] 何威,白象忠. 电磁发射装置轨道及壁板的物性参数选择对其力学性能影响的分析[J]. 机械强度,2014,64(8):755-767. HE Wei,BAI Xiangzhong. Analysis of the influence of physical parameters on the mechanical properties of the rail and panel of electromagnetic launcher[J]. Mechanical Strength,2014,64(8):755-767.
[13] 何威,白象忠. 方口径电磁轨道发射装置导轨及壁板的动力响应[J]. 振动与冲击,2013,32(15):144-148. HE Wei,BAI Xiangzhong. Dynamic responses of rails and panels of rectangular electromagnetic rail launcher[J]. Journal of Vibration and Shock,2013,32(15):144-148.
[14] 蔡喜元,鲁军勇,谭赛,等. 基于双层梁模型的电磁轨道发射身管动力学研究[J]. 舰船科学技术,2019,41(5):101-107. CAI Xiyuan,LU Junyong,TAN Sai,et al. Study on the dynamics of the electromagnetic orbital launch tube based on the double beam model[J]. Ship Science and Technology,2019,41(5):101-107.

[1]	戴荣, 于海涛, 王权. 基于Duffing系统的谐振式微悬臂梁传感器微弱谐振信号检测[J]. 机械工程学报, 2020, 56(13): 50-59.
[2]	蔡志刚, 陈晓川, 王迪, 鲍劲松. 碳碳复合材料的水射流钻孔技术研究[J]. 机械工程学报, 2019, 55(3): 226-232.
[3]	李瑞君, 常振鑫, 雷英俊, 胡鹏浩, 范光照. 基于DVD光学读取头的悬臂式低频加速度计[J]. 机械工程学报, 2019, 55(2): 10-17.
[4]	何创伟,张震锋,阮艳丽,郭伟,常治国. 一种基于UG和ANSYS APDL的断路器灭弧室动态电场快速计算方法[J]. 电气工程学报, 2019, 14(1): 46-51.
[5]	胡弼,曹文耀,胡土雄,王伟. 注塑机用永磁同步电动机的分析与设计[J]. 电气工程学报, 2018, 13(9): 26-31.
[6]	朱军华, 苏伟, 刘人怀, 宋芳芳, 黄钦文. 静电驱动阶梯型微悬臂梁吸合电压分析[J]. 机械工程学报, 2018, 54(8): 217-222.
[7]	罗忠, 刘昊鹏, 朱云鹏, 王菲, 韩清凯. 基于REFOR算法的多输出非线性系统动态参数化建模方法研究[J]. 机械工程学报, 2018, 54(23): 73-81.
[8]	王根, 林建平, 孙鑫, 金晶. 基于最大正应力的自升式平台悬臂梁框架轻量化优化设计[J]. 机械工程学报, 2017, 53(7): 173-179.
[9]	王悦昶, 刘莹, 黄伟峰, 高志, 王玉明. 过盈配合连接对核主泵机械密封性能影响的ANSYS分析^*[J]. 机械工程学报, 2017, 53(5): 153-159.
[10]	王颖, 张建辉, 刘瑞峰. 螺旋线形阀压电泵的理论与试验研究^*[J]. 机械工程学报, 2016, 52(20): 144-150.
[11]	曹世豪, 李煦, 张四放, 文良华, 江晓禹. Hertz理论与有限元法分析轮轨接触疲劳的差异性研究[J]. 机械工程学报, 2015, 51(6): 126-134.
[12]	张成光, 张勇, 张飞虎, 栾殿荣. 新型后混合式磨料水射流系统的研制[J]. 机械工程学报, 2015, 51(5): 205-212.
[13]	方建士, 黎亮, 章定国, 徐振钦. 基于刚柔耦合动力学的旋转悬臂梁的频率转向与振型转换特性[J]. 机械工程学报, 2015, 51(17): 59-65.
[14]	田艳红;贺晓斌;杭春进. 残余应力对混合组装BGA热循环可靠性影响[J]. , 2014, 50(2): 86-91.
[15]	孙燕平;庞春凤. 弯曲残余应力对转子蠕变性能的影响研究[J]. , 2014, 50(18): 162-166.

集中荷载作用下双层弹性悬臂梁动力学分析

Dynamic Analysis of Two-layered Elastic Cantilever Beam under the Action of Concentrated Load

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价