铝合金与高强钢激光-电弧焊铆复合连接机制研究

doi:10.3901/JME.2020.06.057

机械工程学报 ›› 2020, Vol. 56 ›› Issue (6): 57-64.doi: 10.3901/JME.2020.06.057

扫码分享

铝合金与高强钢激光-电弧焊铆复合连接机制研究

韩锐波^1,2, 王红阳^1,2, 杨帆^1,2, 刘黎明^1,2, 祝美丽^1,2

1. 大连理工大学材料科学与工程学院大连 116024;
2. 大连理工大学辽宁省先进焊接与连接重点实验室大连 116024

收稿日期:2019-09-02 修回日期:2019-12-04 出版日期:2020-03-20 发布日期:2020-05-12
作者简介:韩锐波,男,1995年出生。主要研究方向为铝合金和高强钢的先进连接。E-mail:hanruibocl@mail.dlut.edu.cn;
王红阳(通信作者),男,1982年出生,博士,副教授,硕士研究生导师。主要研究方向为异种材料之间的连接。E-mail:wang-hy@dlut.edu.cn
基金资助:
上海市重点实验室开放基金（2019001）和国家自然科学基金汽车联合基金（U1764251）资助项目。

Research on Riveting-laser Arc Welding Hybrid Joining Mechanism of Aluminum Alloy and High Strength Steel

HAN Ruibo^1,2, WANG Hongyang^1,2, YANG Fan^1,2, LIU Liming^1,2, ZHU Meili^1,2

1. School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024;
2. Key Laboratory of Liaoning Advanced Welding and Joining Technology, Dalian University of Technology, Dalian 116024

Received:2019-09-02 Revised:2019-12-04 Online:2020-03-20 Published:2020-05-12

摘要/Abstract

摘要： 为实现6061铝合金和Q460高强钢的优质连接，采用激光诱导电弧复合热源对已通过阶梯型铆钉实现预连接的6061铝合金板和Q460高强钢板进行搭接焊试验。分析焊铆复合连接方法下接头的力学性能，断裂模式以及横截面的宏观和微观形貌。结果表明，在铆钉和复合热源的共同作用下，焊铆复合连接接头由3个承载区域组成，分别为钢板和铆钉形成的对接接头，钢板，铆钉以及铝合金板形成的铝-钢连接区以及铆钉侧壁和铝合金板侧壁形成的铝-钢界面。铝-钢连接区的金属间化合物以富Fe的FeAl相和Fe₃Al相为主。在最佳工艺参数下，焊铆复合连接接头的拉剪载荷达到6.2 kN。拉伸断口呈现出纽扣式断裂、母材基体断裂以及拉拔式断裂3种断裂模式，后两种断裂具有更高的韧性和塑性。阶梯型铆钉和激光-电弧复合热源的协同作用可以实现铝合金和高强钢的优质连接。

关键词: 高强钢, 铝合金, 铆钉, 复合连接, 力学性能, 界面

Abstract: In order to realize the high quality joining of 6061 aluminum alloy and Q460 high-strength steel, the lap welding experiments are carried out on 6061 Al alloy plates and Q460 steel plates which had been pre-joined by multistep rivets by laser induced arc hybrid welding source. The mechanical properties and fracture modes of the hybrid joints are analyzed. In addition, the macroscopic and microscopic morphologies of cross-section of joint are also explored. The results show that the hybrid joint is composed of three loading bear parts under the actions of steel rivet and hybrid welding source, which are respectively the butt joint formed by steel plate and rivet, the Al-steel joint formed by steel plate, rivet and Al alloy plate, and the Al-Fe interface formed by rivet sidewalls and Al alloy plate sidewalls. The intermetallic compounds in Al-steel joint are mainly Fe-rich Fe₃Al phase and FeAl phase. The hybrid joint had a tensile shear load of 6.2 kN under the optimal parameters. There are three different fracture modes after tensile shear tests：button-type fracture mode, steel base-metal fracture mode and pull-out fracture mode. The latter two show a higher toughness and plasticity. The interaction between stepped rivet and laser-arc hybrid welding source enable a high quality joining between Al alloy and high-strength steel.

Key words: high-strength steel, aluminum alloy, rivet, hybrid welding, mechanics, interface

中图分类号:

TG457

韩锐波, 王红阳, 杨帆, 刘黎明, 祝美丽. 铝合金与高强钢激光-电弧焊铆复合连接机制研究[J]. 机械工程学报, 2020, 56(6): 57-64.

HAN Ruibo, WANG Hongyang, YANG Fan, LIU Liming, ZHU Meili. Research on Riveting-laser Arc Welding Hybrid Joining Mechanism of Aluminum Alloy and High Strength Steel[J]. Journal of Mechanical Engineering, 2020, 56(6): 57-64.

参考文献

[1] MESCHUT G,JANZEN V,OLFERMANN T. Innovative and highly productive joining technologies for multi-material lightweight car body structures[J]. Journal of Materials Engineering and Performance,2014,23(5):1515-1523.
[2] 李永兵,李亚庭,楼铭,等.轿车车身轻量化及其对连接技术的挑战[J].机械工程学报,2012,48(18):44-54. LI Yongbing,LI Yating,LOU Ming,et al. Lightweighting of car body and its challenges to joining technologies[J]. Journal of Mechanical Engineering,2012,48(18):44-54.
[3] 马宁,申国哲,张宗华,等.高强度钢板热冲压材料性能研究及在车身设计中的应用[J].机械工程学报,2011,47(8):60-65. MA Ning,SHEN Guozhe,ZHANG Zonghua,et al. Material performance of hot-forming high strength steel and its application in vehicle body[J]. Journal of Mechanical Engineering,2011,47(8):60-65.
[4] 秦国梁,武传松.铝合金/钢异种材料熔钎焊接工艺及其研究现状[J].机械工程学报,2016,52(24):24-35. QIN Guoliang,WU Chuansong. State-of-art of brazing-fusion welding processes of dissimilar metals between aluminum alloy and steel[J]. Journal of Mechanical Engineering,2016,52(24):24-35.
[5] 周惦武,李宁宁,徐少华,等.双相钢/铝合金激光胶接焊胶层作用分析[J].机械工程学报,2016,52(14):25-30. ZHOU Dianwu,LI Ningning,XU Shaohua,et al. Analysis of the adhesive layer of laser weld bonding joints in dual phase steel/aluminum alloy[J]. Journal of Mechanical Engineering,2016,52(14):25-30.
[6] 王希靖,张亚州,李经纬,等.铝/镀锌钢搅拌摩擦铆焊接头组织与力学性能[J].材料科学与工艺,2015,23(2):103-108. WANG Xijing,ZHANG Yazhou,LI Jingwei,et al. Microstructure and mechanical properties of friction stir rivet welding joint between aluminum and galvanized steel[J]. Materials Science & Technology,2015,23(2):103-108.
[7] 邱然锋,申中宝,李青哲,等.铝合金与钢的电阻铆焊[J].焊接学报,2016,37(9):39-42. QIU Ranfeng,SHEN Zhongbao,LI Qingzhe,et al. Resistance rivet-welding of aluminum alloy and steel[J]. Transactions of the China Welding Institution,2016,37(9):39-42.
[8] LING Zhanxiang,LI Yang,LUO Zhen,et al. Resistance element welding of 6061 aluminum alloy to uncoated 22MnMoB boron steel[J]. Materials and Manufacturing Processes,2016,31(16):2174-2180.
[9] WANG Hongyang,FENG Baoqiang,SONG Gang,et al. Laser-arc hybrid welding of high-strength steel and aluminum alloy joints with brass filler[J]. Materials and Manufacturing Processes,2018,33(7):735-742.
[10] 凌展翔,罗震,冯悦峤,等.铝钢点焊铆接复合连接技术[J].焊接学报,2017,38(2):101-104. LING Zhanxiang,LUO Zhen,FENG Yueqiao,et al. Riveting-spot welding hybrid joining technology of aluminum and steel[J]. Transactions of the China Welding Institution,2017,38(2):101-104.
[11] 张冬云,高双欣,高海芸,等.铝/钢异种金属激光填丝熔钎焊连接工艺研究[J].激光与光电子学进展,2011,48(6):90-97. ZHANG Dongyun,GAO Shuangxin,GAO Haiyun,et al. Wire feeding laser brazing and fusion for Al-Fe dissimilar metal[J]. Laser & Optoelectronics Progress,2011,48(6):91-98.
[12] CHOI C Y,KIM D C,NAM D G,et al. A hybrid joining technology for aluminum/zinc coated steels in vehicles[J]. Journal of Materials Science and Technology,2010,26(9):858-864.

[1]	孔玲, 王玉辉, 杨浩坤, 彭艳. Fe-Mn-Al-C系奥氏体基低密度钢使役性能研究进展[J]. 机械工程学报, 2024, 60(8): 34-47.
[2]	任志英, 黄子豪, 方荣政, 王秦伟, 莫继良, 秦红玲. 金属橡胶无序式网格互穿结构的热力学性能研究[J]. 机械工程学报, 2024, 60(8): 165-175.
[3]	李力, 王一轩, 罗芬, 张文涛, 赵巍, 李小强. 钎焊时间对TiH₂-65Ni+TiB₂钎料钎焊连接TiAl合金接头的影响[J]. 机械工程学报, 2024, 60(8): 176-185.
[4]	闫巍, 郑群, 位景山, 姜斌, 丁骏. 基于工业燃机多级轴流压气机特性预测方法研究[J]. 机械工程学报, 2024, 60(8): 299-307.
[5]	陈伟, 赵杰, 朱利斌, 曹海波. 增材制造低活化钢研究现状及展望[J]. 机械工程学报, 2024, 60(7): 312-333.
[6]	郑洋, 赵梓昊, 刘伟, 余政哲, 牛伟, 雷贻文, 孙荣禄. 高性能镁合金增材制造技术研究进展[J]. 机械工程学报, 2024, 60(7): 385-400.
[7]	王博士, 陈楠楠, 蔡艳, 王敏. 低合金贝氏体高强钢模拟焊接粗晶热影响区低温疲劳韧脆转变行为及机制[J]. 机械工程学报, 2024, 60(6): 271-278.
[8]	鲍鑫宇, 麻永林, 程桥, 苏怡卉, 王杰, 邢淑清. 脉冲磁场熔体处理对Al-Si-Mg-Cu-Ni合金DC铸造凝固组织和力学性能的影响[J]. 机械工程学报, 2024, 60(6): 279-286.
[9]	魏永峭, 张晋, 王少江, 漆小虎, 郭瑞, 杨海江. 变双曲圆弧齿线圆柱齿轮传动界面磨损规律及敏感性分析[J]. 机械工程学报, 2024, 60(5): 81-94.
[10]	张越, 卢岩, 彭锐涛, 朱琳伟, 雷贝, 蒋家传. 轻量化材料新型连接工艺与应用现状[J]. 机械工程学报, 2024, 60(4): 259-283.
[11]	王星星, 吴港, 何鹏, 杨晓红. 基于第一性原理的镍/碳化钨复合钎涂层界面分析[J]. 机械工程学报, 2024, 60(4): 296-304.
[12]	张婷婷, 许振波, 王艳, 卞功波, 王涛, 王文先. 高频脉冲电流辅助镁/铝合金一步轧焊复合板制备及界面接合机理[J]. 机械工程学报, 2024, 60(4): 305-315.
[13]	周甜, 蔡力勋, 韩光照. 用于延性材料力学性能测定的圆柱平面-小冲杆试验新方法与应用[J]. 机械工程学报, 2024, 60(4): 316-325.
[14]	马艺星, 杨蔚涛, 关肖虎, 杨旗, 赵同新. TWIP钢/IF钢热轧复合板材的微观结构和界面结合性能[J]. 机械工程学报, 2024, 60(4): 345-356.
[15]	高强, 王健, 张严, 郑旭阳, 吕昊, 殷国栋. 拓扑优化方法及其在运载工程中的应用与展望[J]. 机械工程学报, 2024, 60(4): 369-390.

铝合金与高强钢激光-电弧焊铆复合连接机制研究

Research on Riveting-laser Arc Welding Hybrid Joining Mechanism of Aluminum Alloy and High Strength Steel

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价