四辊卷板机侧辊位移线性自抗扰控制

doi:10.3901/JME.2019.24.072

机械工程学报 ›› 2019, Vol. 55 ›› Issue (24): 72-82.doi: 10.3901/JME.2019.24.072

扫码分享

四辊卷板机侧辊位移线性自抗扰控制

金坤善¹, 宋建丽², 李永堂¹, 仉志强¹

1. 太原科技大学金属材料成形理论与技术山西省重点实验室太原 030024;
2. 北京信息科技大学光电工程学院北京 100192

收稿日期:2018-12-19 修回日期:2019-03-20 出版日期:2019-12-20 发布日期:2020-02-18
通讯作者: 宋建丽(通信作者),女,1969年出生,博士,教授,博士研究生导师。主要研究方向为先进制造技术、激光加工技术。E-mail:songjianli@bistu.edu.cn
作者简介:金坤善,男,1978年出生,博士研究生,讲师。主要研究方向为锻压设备及其先进控制技术。E-mail:hbsz@tyust.edu.cn;李永堂,男,1957年出生,博士,教授,博士研究生导师。主要研究方向为材料成形理论、锻压设备理论、控制及先进集成制造。E-mail:liyongtang@tyust.edu.cn;仉志强,男,1982年出生,博士,讲师。主要研究方向为板材塑性成形工艺与装备。E-mail:zzq704@163.com
基金资助:
高性能复杂制造国家重点实验室开放课题（KFKT2018-13）和（山西省煤机重点科技攻关（MJ2014-07）资助项目。

Linear Active Disturbance Rejection Control for the Side Roller Displacement of Four-roller Plate Bending Machine

JIN Kunshan¹, SONG Jianli², LI Yongtang¹, ZHANG Zhiqiang¹

1. Shanxi Key Laboratory of Metallic Materials Forming Theory and Technology, Taiyuan University of Science and Technology, Taiyuan 030024;
2. School of Instrument Science and Opto-Electronics Engineering, Beijing Information Science and Technology University, Beijing 100192

Received:2018-12-19 Revised:2019-03-20 Online:2019-12-20 Published:2020-02-18

摘要/Abstract

摘要： 侧辊位移的精确控制对实现四辊卷板机高效加工至关重要，其核心问题是提高阀控非对称缸电液伺服系统的抗扰能力。由于电液伺服系统具有高度非线性和时变不确定性，传统非线性控制方法很难有效处理包含未知动态、外部扰动以及参数变化等的多源不确定扰动。提出一种四辊卷板机侧辊位移线性自抗扰控制方法。综合考虑各种不确定扰动因素的影响，设计了线性扩张状态观测器进行实时估计，采用状态误差反馈控制律给予主动补偿，并消除跟踪误差，证明了线性扩张状态观测器状态观测误差的收敛性和电液伺服系统的闭环稳定性。试验结果表明，所设计的线性自抗扰控制器能有效抑制电液伺服系统中多源不确定性扰动，实现侧辊位移的快速、精确轨迹跟踪。

关键词: 四辊卷板机, 侧辊位移, 线性扩张状态观测器, 线性自抗扰控制

Abstract: Precision control of the side roller displacement is of great importance for the high efficient processing of four-roller plate bending machine, in which the key problem is how to improve the disturbance rejection ability of the electro-hydraulic servo system (EHSS) of the valve-controlled asymmetric cylinder. Because EHSS has the characteristics of strong nonlinear and time-varying uncertainty, multiple uncertain disturbances involving unknown dynamics, external disturbance and parameter variations is very difficult to be effectively dealt with traditional nonlinear control methods. A kind of linear active disturbance rejection control (LADRC) strategy for the side roller displacement of four-roller plate bending machine is proposed. Comprehensively considering the influence of the multiple uncertain disturbances of EHSS, a linear extended state observer(LESO) is designed to estimate the disturbances in real time. The state error feedback control law is employed to actively compensate the total disturbance and eliminate the tracking errors. The convergence of the state observation error of the LESO and the closed loop stability of the EHSS has been verified. Experimental results show that the multiple uncertain disturbances of the EHSS can be effectively suppressed with the designed LADRC, and fast and accurate trajectory tracking of the side roller displacement can be realized.

Key words: four-roller plate bending machine, side roller displacement, linear extended state observer, linear active disturbance rejection control

中图分类号:

TP23

金坤善, 宋建丽, 李永堂, 仉志强. 四辊卷板机侧辊位移线性自抗扰控制[J]. 机械工程学报, 2019, 55(24): 72-82.

JIN Kunshan, SONG Jianli, LI Yongtang, ZHANG Zhiqiang. Linear Active Disturbance Rejection Control for the Side Roller Displacement of Four-roller Plate Bending Machine[J]. Journal of Mechanical Engineering, 2019, 55(24): 72-82.

参考文献

[1] 金坤善,宋建丽,李永堂,等. 四辊卷板机侧辊位移跟踪控制[J]. 机械工程学报, 2017, 53(14):171-178. JIN Kunshan, SONG Jianli, LI Yongtang, et al. Displacement tracking control of the side roller of four roller bending machine[J]. Journal of Mechanical Engineering, 2017, 53(14):171-178.
[2] 徐张宝,姚建勇,马大为. 单出杆液压缸位置伺服系统输出反馈控制[J]. 中国科技论文, 2015, 10(10):1164-1169. XU Zhangbao, YAO Jianyong, MA Dawei. Output feedback control for single-rod cylinder position servo system[J]. China Sciencepaper, 2015, 10(10):1164-1169.
[3] SHI J, QUAN L, ZHANG X, et al. Electro-hydraulic velocity and position control based on independent metering valve control in mobile construction equipment[J]. Automation in Construction, 2018, 94(5):73-84.
[4] SCHMIDT L, GROENKJAER M, PEDERSEN H C, et al. Position control of an over-actuated Direct hydraulic cylinder drive[J]. Control Engineering Practice, 2017, 64(7):1-14.
[5] 谢立敏,陈力,赵辉. 漂浮基柔性关节、柔性臂空间机器人动力学建模、饱和鲁棒模糊滑模控制及双重柔性振动主动抑制[J]. 机械工程学报, 2015, 51(1):76-82. XIE Limin, CHEN Li, ZHAO Hui. Modeling, saturation robust fuzzy sliding control and vibration suppression of free-floating flexible-joint flexible-link space robot[J]. Journal of Mechanical Engineering, 2015, 51(1):76-82.
[6] QI H, LIU Z, LANG Y. Symmetrical valve controlled asymmetrical cylinder based on wavelet neural network[J]. Engineering Computations, 2017, 34(7):2154-2167.
[7] NGUYEN M N, TRAN D T, AHN K K. Robust position and vibration control of an electrohydraulic series elastic manipulator against disturbance generated by a variable stiffness actuator[J]. Mechatronics, 2018, 52(4):22-35.
[8] GUO K, WEI J, FANG J, et al. Position tracking control of electro-hydraulic single-rod actuator based on an extended disturbance observer[J]. Mechatronics, 2015, 27(2):47-56.
[9] YAO J, YANG G, Ma D, et al. Adaptive robust control for unknown nonlinear parameters of single-rod hydraulic actuators[C]//Control Conference (CCC), 2014 33rd Chinese. IEEE, 2014:7915-7920.
[10] GDOURA E K, FEKI M, DERBEL N. Sliding mode control of a hydraulic servo system position using adaptive sliding surface and adaptive gain[J]. International Journal of Modeling, Identification and Control, 2015, 23(3):248-259.
[11] 林浩,李恩,梁自泽. 具有非线性不确定参数的电液伺服系统自适应backstepping控制[J]. 控制理论与应用, 2016, 33(2):181-188. LIN Hao, LI En, LIANG Zize. Adaptive backstepping controller for electro-hydraulic servo system with nonlinear uncertain parameters[J]. Control Theory & Applications, 2016, 33(2):181-188.
[12] AHN K K, NAM D N C, JIN M. Adaptive backstepping control of an electrohydraulic actuator[J]. IEEE/ASME Transactions on Mechatronics, 2014, 19(3):987-995.
[13] 王伟,张晶涛,柴天佑. PID参数先进整定方法综述[J]. 自动化学报, 2000, 26(3):347-355. WANG Wei, ZHANG Jingtao, CHAI Tianyou. Review of Advanced tuning methods for PID parameters[J]. Acta Automatica Sinica, 2000, 26(3):347-355.
[14] 韩京清. 非线性PID控制器[J]. 自动化学报, 1994, 20(4):487-490. HAN Jingqing. Nonlinear PID controller[J]. Acta Automatica Sinica, 1994, 20(4):487-490.
[15] HAN J. From PID to active disturbance rejection control[J]. IEEE Transactions on Industrial Electronics, 2009, 56(3):900-906.
[16] GAO Z Q. Scaling and bandwidth-parameterization based on control tuning[C]//Proc. of the 2004 American Control Conf. Denver:IEEE, 2003:4989-4996.

四辊卷板机侧辊位移线性自抗扰控制

Linear Active Disturbance Rejection Control for the Side Roller Displacement of Four-roller Plate Bending Machine

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价