磁场作用下铝/钢CMT焊接温度场及熔池流动行为

doi:10.3901/JME.2018.02.048

机械工程学报 ›› 2018, Vol. 54 ›› Issue (2): 48-54.doi: 10.3901/JME.2018.02.048

• 特邀专栏:焊接过程测控与数值模拟 • 上一篇下一篇

扫码分享

磁场作用下铝/钢CMT焊接温度场及熔池流动行为

刘一搏^1,2, 张鸿名³, 孙清洁^1,2, 李军兆², 冯吉才^1,2

1. 哈尔滨工业大学先进焊接与连接国家重点实验室哈尔滨 150001;
2. 哈尔滨工业大学(威海)特种焊接技术山东省重点实验室威海 264209;
3. 哈尔滨工业大学(威海)土木工程学系威海 264209

收稿日期:2017-05-24 修回日期:2017-08-04 出版日期:2018-01-20 发布日期:2018-01-20
通讯作者: 孙清洁(通信作者),男,1980年出生,博士,副教授,博士研究生导师。主要研究方向为超声电弧复合焊接机理、高效焊接方法及设备、水下焊接技术等。E-mail:qjsun@hit.edu.cn
作者简介:刘一搏,男,1987年出生,博士,助理研究员。主要研究方向为异种金属熔钎焊连接、电弧增材制造方法及工艺、水下湿法焊接技术等。E-mail:ybliu0701@hit.edu.cn
基金资助:
国家自然科学基金（51705103，51475104）和哈尔滨工业大学（威海）校科学研究基金（HIT（WH）201605，201507）资助项目。

Effect of Magnetic Field on the Weld Temperature Field and Flow Behavior of Molten Pool in Al/Steel CMT Welding Process

LIU Yibo^1,2, ZHANG Hongming³, SUN Qingjie^1,2, LI Junzhao², FENG Jicai^1,2

1. State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001;
2. Shandong Provincial Key Laboratory of Special Welding Technology, Harbin Institute of Technology at Weihai, Weihai 264209;
3. Civil Engineering, Harbin Institute of Technology at Weihai, Weihai 264209

Received:2017-05-24 Revised:2017-08-04 Online:2018-01-20 Published:2018-01-20

摘要/Abstract

摘要： 为探究纵向磁场在铝/钢冷金属过渡（Cold metal transfer，CMT）焊接过程中的作用机理，采用ANSYS软件对纵向磁场作用下电弧形态、温度分布和熔池流动行为进行数值模拟，重点研究不同线圈励磁电流对焊接温度场和熔池流动行为的影响。结果表明，外加磁场可以改变电弧等离子体的运动行为，进而影响了焊接电弧在基板表面和熔池内部的热量传导行为。施加磁场后，熔池中的峰值温度发生下降，峰值温度区域由熔池中心转向熔池外围，铝/钢界面处的高温停留时间和温度也随之下降。此外，外加磁场改变了铝液熔池内部的流动行为。熔池内部的流动特征由无磁场时的单一环流，转变为有磁场作用时的双环流流动特征。随着励磁电流的增加，熔池内部的流速和流动范围有增大的趋势。

关键词: 磁场, 电弧焊, 流动行为, 铝/钢, 温度场

Abstract: In order to investigate the effect mechanism of longitudinal magnetic field on the Al/Steel cold metal transfer(CMT) welding process, the morphology and temperature distribution of weld arc and the flow behavior of molten pool are simulated by ANSYS software in present work. The results show that the external magnetic field (EMF) could change the movement of arc plasma, and ultimately affected the arc shape as well as the heat conduction behavior from weld arc to the molten pool and base plate. With application of EMF, the peak temperature of molten pool decreases, and the high-temperature zone moves from the center of molten pool to the lateral, which decreases the reaction temperature and retention time of high-temperature at the front interface of Al/steel joint. Besides that, the application of EMF also changes the flow behavior of molten pool. The flow behavior inside the molten pool changes from the single circulation into a double circulation flow characteristics by application of EMF. With the increase of core exciting current, the flow rate of inside molten pool is increase.

Key words: Al/Steel, arc welding, flow behavior, magnetic field, temperature field

中图分类号:

TG156

刘一搏, 张鸿名, 孙清洁, 李军兆, 冯吉才. 磁场作用下铝/钢CMT焊接温度场及熔池流动行为[J]. 机械工程学报, 2018, 54(2): 48-54.

LIU Yibo, ZHANG Hongming, SUN Qingjie, LI Junzhao, FENG Jicai. Effect of Magnetic Field on the Weld Temperature Field and Flow Behavior of Molten Pool in Al/Steel CMT Welding Process[J]. Journal of Mechanical Engineering, 2018, 54(2): 48-54.

参考文献

[1] 朱明,石玗,樊丁,等. 脉冲旁路耦合电弧MIG焊的动态数学建模及过程控制[J]. 机械工程学报,2015,51(20):86-93. ZHU Ming,SHI Yu,FAN Ding,et al. Modeling and control of pulsed double-electrode MIG welding process[J]. Journal of Mechanical Engineering,2015,51(20):86-93.
[2] SUN J H,YAN Q,LI Z G,et al. Effect of bevel angle on microstructure and mechanical property of Al/steel butt joint using laser welding-brazing method[J]. Materials and Design,2016,90:468-477.
[3] HUSSEIN S A,TAHIR A S M,HADZLEY A B. Characteristics of aluminum-to-steel joint made by friction stir welding:A review[J]. Materials Today Communications,2015,5:32-49.
[4] LEI H Y,LI Y B,CARLSON B E,et al. Cold metal transfer spot joining of AA6061-T6 to galvanized DP590 under different modes[J]. Journal of Manufacturing Science and Engineering,2015,137(051028):1-10.
[5] CAO R,YU G,CHEN J H,et al. Cold metal transfer joining aluminum alloys-to-galvanized mild steel[J]. Journal of Materials Processing Technology,2013,213(10):1753-1763.
[6] SU Y C,HUA X M,WU Y X. Effect of input current modes on intermetallic layer and mechanical property of aluminum-steel lap joint obtained by gas metal arc welding[J]. Materials Science and Engineering A,2013,578:340-345.
[7] BORRISUTTHEKUL R,YACHI T,MIYASHITA Y,et al. Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy[J]. Materials Science and Engineering A,2007,467:108-113.
[8] 孙大千,张月莹,苏雷,等. 电极形状对铝-钢点焊接头组织及力学性能的影响[J]. 机械工程学报,2016,52(24):36-43. SUN Daqian,ZHANG Yueying,SU Lei,et al. Effect of electrode morphology on microstructures and mechanical properties of spot welded Al-steel joints[J]. Journal of Mechanical Engineering,2016,52(24):36-43.
[9] LIM Y C,YU X,CHO J H,et al. Effect of magnetic stirring on grain structure refinement Part 1-Autogenous nickel alloy welds[J]. Science and Technology of Welding and joining,2010,15(7):583-589.
[10] YANG C G,LIU G P,CHEN Y H,et al. Effect of electromagnetic stirring plus single pulse on the microstructure and properties of high strength Al-Cu alloy welds[J]. Advanced Materials Research,2012,391:1225-1229.
[11] 常云龙,贺优优,杜怀周. 纵向磁场对低碳钢MIG焊焊缝组织及性能的影响[J]. 沈阳工业大学学报,2007,29(4):385-387. CHANG Yunlong,HE Youyou,DU Huaizhou. Effect of longitudinal magnetic field on microstructure and properties of MIG weld joint of mild steel[J]. Journal of Shenyang University of Technology,2007,29(4):385-387.
[12] SHEN Q,LI Y B,LIN Z Q,et al. Effect of external constant magnetic field on weld nugget of resistance spot welded dual-phase steel DP590[J]. IEEE Transaction on Magnetics,2011,47(10):4116-4119.
[13] XU D,LIU X S,YANG J G,et al. Dynamic evolution of welding residual stress field under noncontact electromagnetic force[J]. Journal of Applied Physics,2010(107):054904.
[14] LIU Y B,SUN Q J,LIU J P,et al. Effect of axial external magnetic field on cold metal transfer welds of aluminum alloy and stainless steel[J]. Materials Letters,2015,152:29-31.
[15] CHEN R,WANG C M,JIANG P,et al. Effect of axial magnetic field in the laser beam welding of stainless steel to aluminum alloy[J]. Materials and Design,2016,109:146-152.
[16] LIU Y B,SUN Q J,WANG H,et al. Effect of the axial external magnetic field on copper/aluminium arc weld joining[J]. Science and Technology of Welding and joining,2016,21(6):460-465.
[17] SUN Q J,LI J Z,LIU Y B,et al. Microstructural characterization and mechanical properties of Al/Ti joint welded by CMT method-Assisted hybrid magnetic field,Materials and Design,2017,116:316-324.
[18] 曹振宁,武传松,吴林. 熔滴冲击下MIG焊接熔池的计算机模拟[J]. 金属学报,1994,30(12):537-542. CAO Zhenning,WU Chuansong,WU Lin. Computer simulation of MIG weld pools with droplet impact[J]. Acta Metallurgica Sinica,1994,30(12):537-542.

磁场作用下铝/钢CMT焊接温度场及熔池流动行为

Effect of Magnetic Field on the Weld Temperature Field and Flow Behavior of Molten Pool in Al/Steel CMT Welding Process

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	刘鑫, 张俊, 徐斌斌, 刘弘光, 赵万华. 激光辅助铣削过程的预热温度场调控方法研究[J]. 机械工程学报, 2024, 60(9): 218-228.
[2]	江安娜, 言兰, 王宁昌, 姜峰, 李卓, 温秋玲, 卢希钊, 黄辉. 能量场辅助激光诱导等离子体加工透明硬脆材料的研究现状及发展趋势[J]. 机械工程学报, 2024, 60(9): 254-272.
[3]	王优强, 徐莹, 莫君, 何彦, 赵涛, 倪陈兵. 磁场作用下水基磁流体对TC4与Si₃N₄摩擦学性能影响的实验研究[J]. 机械工程学报, 2024, 60(7): 174-183.
[4]	曾少昔, 赵春田, 李红梅. 铁磁材料漏磁信号对拉伸应力的响应研究[J]. 机械工程学报, 2024, 60(20): 68-76.
[5]	彭文, 张丽, 李旭东, 刘军, 孙杰, 张殿华. 边部感应加热过程中的轧件热行为与温度均匀性研究[J]. 机械工程学报, 2024, 60(2): 119-131.
[6]	王刚, 谷诤巍, 于歌, 李欣. 热成形工艺条件下7075-H18铝合金板材塑性流动行为的本构建模[J]. 机械工程学报, 2024, 60(2): 188-196.
[7]	葛玖浩, 陈炫昂, 杨晨开, 徐飞. 基于旋转电磁场的裂纹周围电流分布反演新方法[J]. 机械工程学报, 2024, 60(18): 17-23.
[8]	袁晓明, 庞浩东, 高鸿发, 侯书博, 郝秀红. 磁场调制型磁齿轮研究综述[J]. 机械工程学报, 2024, 60(14): 347-363.
[9]	高转妮, 王磊磊, 李响, 刘志强, 吕飞阅, 黎一帆, 占小红. 7075铝合金激光熔丝增材制造热循环和温度梯度对熔池凝固组织的影响研究[J]. 机械工程学报, 2024, 60(1): 96-118.
[10]	沙力撒, 刘剑. 脉冲磁场处理对硬质合金钻针钻削性能的影响[J]. 机械工程学报, 2023, 59(7): 176-185.
[11]	王慧鹏, 朱鹏华, 舒凤远, 何鹏, 刘存宇. 65Mn钢表面激光熔覆温度场模拟及性能研究[J]. 机械工程学报, 2023, 59(7): 216-224.
[12]	吕盈盈, 包广清. 高温超导双定子永磁游标电机的优化与特性分析^*[J]. 电气工程学报, 2023, 18(3): 175-183.
[13]	崔悦, 朱丽艳, 胡斌, 魏东, 杜雁霞, 桂业伟. 高温结构内部温度场和厚度的超声同步测量方法研究[J]. 机械工程学报, 2023, 59(22): 215-221.
[14]	肖红, 王璞, 朱晶亮, 陈希青, 唐海燕, 肖晓丹, 张家泉. 行波磁场减速模式对板坯连铸结晶器内传输行为的影响[J]. 机械工程学报, 2023, 59(18): 219-227.
[15]	郭源帆, 尹韶辉, 黄帅. Halbach阵列与不同励磁方式的磁流变抛光特性及机理研究[J]. 机械工程学报, 2023, 59(15): 341-353.