高速列车锻钢制动盘热疲劳裂纹耦合扩展特性研究

doi:10.3901/JME.2016.10.126

机械工程学报 ›› 2016, Vol. 52 ›› Issue (10): 126-132.doi: 10.3901/JME.2016.10.126

扫码分享

高速列车锻钢制动盘热疲劳裂纹耦合扩展特性研究

石晓玲¹, 李强¹, 宋占勋², 杨广雪¹

1. 北京交通大学机械与电子控制工程学院北京 100044;
2. 北京市轨道交通建设管理有限公司北京 100037

出版日期:2016-05-15 发布日期:2016-05-15
作者简介:石晓玲(通信作者),女,1985年出生,博士研究生。主要研究方向为疲劳强度和车辆工程。E-mail：10116310@bjtu.edu.cn;李强,男,1963年出生,博士,教授,博士研究生导师。主要研究方向为机车车辆结构强度、疲劳及可靠性、无损检测方法。E-mail：qli3@bjtu.edu.cn
基金资助:
国家自然科学基金(U1134201)和国家科技支撑计划(2011BAG10B01)资助项目

Research on Coupled Extension Characteristic of Thermal Fatigue Cracks at Forged Brake Disc for High Speed Train

SHI Xiaoling¹, LI Qiang¹, SONG Zhanxun², YANG Guangxue¹

1. School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University, Beijing 100044;
2. Beijing MTR Construction Administration Corporation, Beijing 100037

Online:2016-05-15 Published:2016-05-15

摘要/Abstract

摘要： 据制动盘裂纹剖面的宏观形貌,发现盘面长裂纹的形成以多条半椭圆表面裂纹连通为主。针对制动盘在运行过程中的典型运用工况,采用有限元法计算制动盘在300 km/h紧急制动后的热应力,发现周向残余应力较大,并以此推测周向残余应力是驱动制动盘热疲劳裂纹扩展的主要原因。在此基础上,建立制动盘盘面的裂纹网格,研究了裂纹扩展过程中的应力强度因子和多裂纹耦合扩展规律。通过研究发现对于给定的载荷条件,不同初始形状比时,裂纹前缘应力强度因子的分布规律存在一定的规律性,随着裂纹的扩展,裂纹形状趋于扁平化;多裂纹扩展时,裂纹间距越小,裂纹间的相互作用越明显,扩展速度越快;但受制动盘结构和尺寸限制,共线裂纹数越多,每条裂纹扩展到临界值时的应力强度因子越小。

关键词: 残余应力, 高速列车, 耦合扩展, 热疲劳裂纹, 应力强度因子, 制动盘

Abstract: According to the profile of brake disc crack macro-morphology, the main forms of long crack are approximately its own expansion and multiple cracks connectivity. Regarding the brake disk typical conditions during operation, the circumferential residual stress are considerable by calculated the thermal stress in 300 km/h emergency braking using the finite element method. Thereafter, the thermal fatigue crack growth of brake disc is drove through circumferential residual stress. Based on the conclusion, the brake disc grid with crack is established, and then the distribution of the stress intensity factor and the coupled propagation law between multi-cracks in the crack propagation process are researched. The results show that, the stress intensity factor of crack tip have regularity for different initial crack size and the crack shape tends to flatten with crack propagation under same load; When multiple crack are propagated, crack spacing smaller, the faster expansion and the interaction are more obvious; however, considering the structure and size limits, the more the number of cracks, the smaller the stress intensity factor when crack extended to critical value.

Key words: brake disc, coupling expansion, high speed train, residual stress, stress intensity factor, thermal fatigue crack

中图分类号:

U270

石晓玲, 李强, 宋占勋, 杨广雪. 高速列车锻钢制动盘热疲劳裂纹耦合扩展特性研究[J]. 机械工程学报, 2016, 52(10): 126-132.

SHI Xiaoling, LI Qiang, SONG Zhanxun, YANG Guangxue. Research on Coupled Extension Characteristic of Thermal Fatigue Cracks at Forged Brake Disc for High Speed Train[J]. Journal of Mechanical Engineering, 2016, 52(10): 126-132.

参考文献

[1] LE H,GARDIN C. Analytical prediction of crack propagation under thermal cyclic loading inducing a thermal gradient in the specimen thickness - comparison with experiments and numerical approach[J]. Engineering Fracture Mechanics,2011,78(4)：638-652.
[2] 王世杰,闫明,佟玲,等. 循环载荷下热疲劳裂纹的应力强度因子[J]. 机械工程学报,2010,46(10)：64-68.
WANG Shijie,YAN Ming,TONG Ling,et al. Stress intensity factor of thermal fatigue crack under cyclic loading[J]. Journal of Mechanical Engineering,2010,46(10)：64-68.
[3] 赵荣国,李红超,蒋永洲,等. 航空发动机涡轮盘用GH4133B合金疲劳裂纹萌生与短裂纹扩展研究[J]. 机械工程学报,2013,49(10)：116-126.
ZHAO Rongguo,LI Hongchao,JIANG Yongzhou,et al. Research on fatigue crack initiation and short crack propagation of GH4133B superalloy used in turbine disk of aero-engine[J]. Journal of Mechanical Engineering,2013,49(10)：116-126.
[4] 李继山,李和平,林祜亭. 高速列车制动盘裂纹现状调查分析[J]. 铁道机车车辆,2005,25(6)：3-5.
LI Jishan,LI Heping,LIN Huting. Crack investigation and analysis on the brake disc of high speed train[J]. Railway Locomotive and Car,2005,25(6)：3-5.
[5] BAGNOLI F,DOLCE F,BERNABEI M. Thermal fatigue cracks of fire fighting vehicles gray iron brake discs[J]. Engineering Failure Analysis,2009,16(1)：152-163.
[6] MORI H,TOMINAGA T,MATSUI M,et al. Observation of thermal cracks of microstructural size scale by thermal effect during wear in Ni-Cr-Mo alloy steel brake discs[J]. Journal of the Japan Institute of Metals,2006,70(10)：785-789.
[7] STARINK M,REED P. Thermal activation of fatigue crack growth：analyzing the mechanisms of fatigue crack propagation in superalloys[J]. Materials Science and Engineering,2008,491(1-2)：279-289.
[8] 闫明,王世杰,孙淑霞,等. 热疲劳裂纹网的屏蔽规律及主裂纹应力强度因子的计算方法[J]. 机械工程学报,2009,45(12)：279-283.
YAN Ming,WANG Shijie,SUN Shuxia,et al. Shielding effect rule of thermal fatigue crack net and calculating method of stress intensity factor of main crack[J]. Journal of Mechanical Engineering,2009,45(12)：279-283.
[9] 丁振宇,高增梁,王效贵. 16MnR钢过载峰作用下的疲劳裂纹扩展行为研究[J]. 机械工程学报,2013,49(16)：84-90.
DING Zhenyu,GAO Zengliang,WANG Xiaogui. Study on crack growth behavior of 16MnR subjected to single tensile overload[J]. Journal of Mechanical Engineering,2013,49(16)：84-90.
[10] YANG Zhiyong,HAN Jianming,LI Weijing,et al. Analyzing the mechanisms of fatigue crack initiation and propagation in CRH EMU brake discs[J]. Engineering Failure Analysis,2013,34(8)：121-128.
[11] XIAO X,YAN X. A numerical analysis for cracks emanating from a surface semispherical cavity in an infinite elastic body by FRANC3D[J]. Engineering Failure Analysis,2008,15(1-2)：188-192.
[12] 陈传尧. 疲劳与断裂[M]. 武汉：华中科技大学出版社,2003.
CHEN Chuanyao. Fatigue and fracture[M]. Wuhan：Huazhong University of Science and Technology Press,2003.

[1]	陈钊杰, 谢晋, 刘军汉, 熊长新, 李迪帆. 脉冲放电驱动磨料流辅助磨削单晶碳化硅研究[J]. 机械工程学报, 2024, 60(9): 383-392.
[2]	柴依扬, 张乐乐, 窦伟元, 张海峰. 基于并行NSGA-III算法的高速列车车体侧墙结构高维多目标优化[J]. 机械工程学报, 2024, 60(6): 321-333.
[3]	周素霞, 巴馨悦, 王君艳, 李光, 曲直. 鳞片仿生制动盘散热性能研究[J]. 机械工程学报, 2024, 60(6): 354-362.
[4]	项载毓, 莫继良, 贺德强, 朱松, 翟财周, 杜利清. 基于三明治阻尼结构的高速列车制动摩擦振动噪声抑制[J]. 机械工程学报, 2024, 60(5): 196-208.
[5]	胡龙, 刘红艳, 成慧梅, 陈维奇, 冯广杰, 叶延洪, 邓德安. 超高强耐磨钢NM500多层多道对接接头残余应力的研究[J]. 机械工程学报, 2024, 60(4): 335-344.
[6]	朱海燕, 黎洁, 肖乾, 陈道云. 轮轨激励对高速列车轴装制动盘热-机耦合疲劳分析[J]. 机械工程学报, 2024, 60(4): 409-419.
[7]	马泳涛, 孙宁, 王俊龙, 李春凡, 卢春生, 张彬, 刘兰荣. 前混合水射流喷丸覆盖率计算及对渗碳钢表面完整性的影响研究[J]. 机械工程学报, 2024, 60(3): 393-404.
[8]	郑志伟, 易彩, 廖小康. 线路条件对高速列车轴箱轴承载荷特性影响研究[J]. 机械工程学报, 2024, 60(20): 251-260.
[9]	王高见, 刘丽, 康丹丹, 叶延洪, 邓德安. Ni含量对高速列车转向架耐候钢焊缝金属微观组织、力学性能及腐蚀行为的影响[J]. 机械工程学报, 2024, 60(18): 163-172.
[10]	姚丹, 张捷, 王瑞乾, 肖新标. 阻尼处理对铝型材结构隔声特性的影响分析[J]. 机械工程学报, 2024, 60(18): 299-309.
[11]	戴志远, 李田, 张卫华, 张继业. 不同海拔高度环境下高速列车气动特性研究[J]. 机械工程学报, 2024, 60(16): 291-305.
[12]	张吉银, 姚倡锋, 谭靓, 崔敏超, 周征, 孙蕴齐, 李国喜, 樊怡. 喷丸强化残余应力对疲劳性能和变形控制影响研究进展[J]. 机械工程学报, 2023, 59(6): 46-60.
[13]	高闯, 孙守光, 任尊松, 任君临. 车轮多边形对高速列车车轴疲劳强度影响研究[J]. 机械工程学报, 2023, 59(6): 185-193.
[14]	何海风, 刘怀举, 朱才朝, 李高萌, 陈地发. 残余应力对齿轮弯曲疲劳的量化影响研究[J]. 机械工程学报, 2023, 59(4): 53-61.
[15]	张庆贺, 卢纯, 吴元科, 赵婧, 莫继良. 基于接触压力分布和非均匀热流密度的列车制动盘热机耦合分析[J]. 机械工程学报, 2023, 59(3): 165-175.

高速列车锻钢制动盘热疲劳裂纹耦合扩展特性研究

Research on Coupled Extension Characteristic of Thermal Fatigue Cracks at Forged Brake Disc for High Speed Train

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价