[1] 周济.智能制造——"中国制造2025"的主攻方向[J].中国机械工程, 2015, 26(17):2273-2284. ZHOU Ji. Intelligen manufacturing——main direction of "Made in China 2025"[J]. China Mechanical Engineering, 2015, 26(17):2273-2284. [2] LIU H, CHEN X, WANG X. Overview and prospects on distributed drive electric vehicles and its energy saving strategy[J]. Przegl?d Elektrotechniczny, 2012, 88(7a):122-125. [3] GUIFANG G, GANG X, BINGGANG C, et al. Driving and control of torque for direct-wheel-driven electric vehicle with motors in serial[J]. Expert Systems with Applications, 2011, 38(1):80-86. [4] 余卓平,冯源,熊璐.分布式驱动电动汽车动力学控制发展现状综述[J].机械工程学报, 2013, 49(8):105-114. YU Zhuoping, FENG Yuan, XIONG Lu. Review on vehicle dynamics control of distributed drive electric vehicle[J]. Journal of Mechanical Engineering, 2013, 49(8):105-114. [5] SAKAI S I, SADO H, HORI Y. Motion control in an electric vehicle with four independently driven in-wheel motors[J]. IEEE/ASME Transactions on Mechatronics, 1999, 4(1):9-16. [6] 张利鹏,李亮,祁炳楠,等.分布式驱动电动汽车转矩自适应驱动防滑控制[J].机械工程学报, 2013, 49(14):106-113. ZHANG Lipeng, LI Liang, QI Bingnan, et al. Torque adaptive traction control for distributed drive electric vehicle[J]. Journal of Mechanical Engineering, 2013, 49(14):106-113. [7] 郭孔辉,纪云峰,庄晔,等.分布式驱动电动车降阶滑模状态观测器设计[J].科学技术与工程, 2014, 14(20):121-125. GUO Konghui, JI Yunfeng, ZHUANG Ye, et al. Design of reduced-order sliding mode observer for In-wheel motor electric vehicles[J]. Science Technology and Engineering, 2014, 14(20):121-125. [8] YU Z, LENG B, XIONG L, et al. Direct yaw moment control for distributed drive electric vehicle handling performance improvement[J]. Chinese Journal of Mechanical Engineering, 2016, 29(3):486-497. [9] 裘熙定,季学武,王志浩,等.轮胎刚度的非线性特性[J].吉林工业大学学报, 1994, 24(4):9-15. QIU Xiding, JI Xuewu, WANG Zhihao, et al. Study on non-linear characteristics of tire stiffness[J]. Journal of Jilin University of Technology, 1994, 24(4):9-15. [10] BESSELINK I, SCHMEITZ A, PACEJKA H. An improved magic formula/swift tyre model that can handle inflation pressure changes[J]. Vehicle System Dynamics, 2010, 48(S1):337-352. [11] SCHMEITZ A, BESSELINK I, DE HOOGH J, et al. Extending the magic formula and SWIFT tyre models for inflation pressure changes[J]. VDI BERICHTE, 2005, 1912201. [12] 阳超.考虑胎压影响的轮胎稳态模型研究[D].长春:吉林大学, 2017. YANG Chao. Study on steady-state tire model considering inflation pressure[D]. Changchun:Jilin University, 2017. [13] 王健.考虑胎压的非稳态轮胎力学特性研究[D].长春:吉林大学, 2017. WANG Jian. Study on non-steady tire mechanical characteristics considering inflation pressure[D]. Changchun:Jilin University, 2017. [14] GIPSER M. FTire and puzzling tyre physics:teacher, not student[J]. Vehicle System Dynamics, 2015, 54(4):448-462. [15] GIPSER M. FTire:A physically based application-oriented tyre model for use with detailed MBS and finite-element suspension models[J]. Vehicle System Dynamics, 2005, 43(Suppl.):76-91. [16] KASPRZAK E M, LEWIS K E, MILLIKEN D L. Inflation pressure effects in the nondimensional tire model[R]. SAE, 2006-01-3607, 2006. [17] 李韶华,周军魏,张志达.轮胎三向动态特性试验及非线性建模[J].机械工程学报, 2018, 54(18):85-96. LI Shaohua, ZHOU Junwei, ZHANG Zhida. Experiment and nonlinear modeling on tire dynamic characteristics of three directional[J]. Journal of Mechanical Engineering, 2018, 54(18):85-96. [18] GLEMMING D, BOWERS P. Tire testing for rolling resistance and fuel economy[J]. Tire Science and Technology, 1974, 2(4):286-311. [19] E.HALL D, MORELAND J C. Fundamentals of rolling resistance[J]. Rubber Chemistry and Technology, 2000, 74(3):525-539. [20] ABE A, KAMEGAWA T, NAKAJIMA Y. Optimum Young's modulus distribution in tire design[J]. Tire Science and Technology, 1996, 24(3):204-219. [21] WADDELL W H. Effect of inflation pressure on tire rolling resistance and vehicle fuel economy[J]. Nippon Gomu Kyokaishi, 2017, 90(3):77-79. [22] GRUGETT B C, REINEMAN M E, THOMPSON G D. The effects of tire inflation pressure on passenger car fuel consumption[R]. SAE, 810069, 1981. [23] SINA N, NASIRI S, KARKHANEH V. Effects of resistive loads and tire inflation pressure on tire power losses and CO2 emissions in real-world conditions[J]. Applied Energy, 2015, 157:974-983. [24] REITER M, WAGNER J. Automated automotive tire inflation system-effect of tire pressure on vehicle handling[J]. IFAC Proceedings Volumes, 2010, 43(7):638-643. [25] SANDONI G, RINGDORFER M. Electronic regulation of an automated car tyres pressure control system[J]. IFAC Proceedings Volumes, 2006, 39(16):514-519. [26] RIEVAJ V, VRáBEL J, HUDáK A. Tire inflation pressure influence on a vehicle stopping distances[J]. International Journal of Traffic and Transportation Engineering, 2013, 2(2):9-13. [27] SAVITSKI D, HOEPPING K, IVANOV V, et al. Influence of the tire inflation pressure variation on braking efficiency and driving comfort of full electric vehicle with continuous anti-lock braking system[R]. SAE, 2015-01-0643, 2015. [28] 聂士达.考虑不变点特性的半主动悬架综合性能研究[D].长春:吉林大学, 2018. NIE Shida. Comprehensive performance study of semi-active suspension considering invariant point properties[D]. Changchun:Jilin University, 2018. [29] CHOI S B, HAN Y M. Vibration control of electror-heological seat suspension with human-body model using sliding mode control[J]. Journal of Sound and Vibration, 2007, 303(1-2):391-404. [30] 中华人民共和国国家质量监督检查检疫总局,中国国家标准化管理委员会. GB/T 23716-2009人体对振动的响应测量仪器[S].北京:中国标准出版社,2009. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. GB/T 23716-2009 Human response to vibration-Measuring instrumentation[S]. Beijing:Standards Press of China, 2009. [31] WANG R, CHEN Y, FENG D, et al. Development and performance characterization of an electric ground vehicle with independently actuated in-wheel motors[J]. Journal of Power Sources, 2011, 196(8):3962-3971. [32] 朱成伟,刘洋,庄晔,等.基于简易轮胎试验模态测试的滚阻特性评价方法[J].农业机械学报, 2019, 50(6):371-378. ZHU Chengwei, LIU Yang, ZHUANG Ye, et al. Evaluation of rolling resistance characteristics based on simple tire experimental modal test[J]. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(6):371-378. [33] 卢荡,郭孔辉.轮胎结构不对称性对其力学特性建模的影响[J].吉林大学学报, 2004, 34(2):185-188. LU Dang, GUO Konghui. Structure un-symmetry effect on tire mechanical behavior modeling[J]. Journal of Jilin University, 2004, 34(2):185-188. [34] HALL E D, MORELAND J C. Fundamentals of rolling resistance[J]. Rubber Chemistry and Technology, 2000, 74(3):525-539. [35] 管迪华,曾祥生,范成建.轮胎动态模型的阻尼和对滚动阻力及动态响应影响的分析[J].汽车工程, 2006, 28(7):643-646. GUAN Dihua, ZENG Xiangsheng, FAN Chengjian. An analysis on different types of damping in tire dynamic model and their effects on rolling resistance and dyanmic responses of tire[J]. Automotive Engineering, 2006, 28(7):643-646. [36] MEIROVITCH L. Elements of vibration analysis[M]. USA:McGraw-Hill Science, Engineering&Mathematics, 1975. [37] SCHURING D J. The rolling loss of pneumatic tires[J]. Rubber Chemistry and Technology, 1980, 53(3):600-727. |