[1] 杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007(1):1-12. DU Shanyi. Advanced composite materials and aerospace engineering[J]. Acta Materiae Compositae Sinica, 2007(1):1-12. [2] CHE Demeng, SAXENA I, HAN Peidong, et al. Machining of carbon fiber reinforced plastics/polymers: a literature review[J]. Journal of Manufacturing Science & Engineering, 2014, 136(3):034001. [3] LIU Defu, TANG Yongjun, CONG Weilong. A review of mechanical drilling for composite laminates[J]. Composite Structures, 2012, 94(4):1265-1279. [4] STONE R, KRISHNAMURTHY K. A neural network thrust force controller to minimize delamination during drilling of graphite-epoxy laminates[J]. International Journal of Machine Tools & Manufacture, 1995, 36(9):985-1003. [5] HOCHENG H, DHARAN C K H. Delamination during drilling in composite laminates[J]. Transactions-American Society of Mechanical Engineers Journal of Engineering for Industry, 1990, 112(3):236-239. [6] TSAO C C, HOCHENG H. Effect of eccentricity of twist drill and candle stick drill on delamination in drilling composite materials[J]. International Journal of Machine Tools & Manufacture, 2005, 45(2):125-130. [7] JAIN S, YANG D C H. Effects of feedrate and chisel edge on delamination in composites drilling[J]. Transactions-American Society of Mechanical Engineers Journal of Engineering for Industry, 1993, 115:398-398. [8] GURURAJA S, RAMULU M. Modified exit-ply delamination model for drilling FRPs[J]. Journal of Composite Materials, 2009, 43(5):483-500. [9] HINTZE W, HARTMANN D. Modeling of delamination during milling of unidirectional CFRP[J]. Procedia CIRP, 2013, 8:444-449. [10] 周井文, 陈燕, 傅玉灿, 等. 纤维切削角对CFRP加工缺陷的影响规律[J]. 哈尔滨工业大学学报, 2015, 47(7):110-116. ZHOU Jingwen, CHEN Yan, FU Yucan, et al. Influence of fiber cutting angle on the machining defects during slotting of CFRP[J]. Journal of Harbin Institute of Technology, 2015, 47(7):110-116. [11] SOLDANI X, SANTIUSTE C, MUÑOZ-SÁNCHEZ A, et al. Influence of tool geometry and numerical parameters when modeling orthogonal cutting of LFRP composites[J]. Composites Part A:Applied Science and Manufacturing, 2011, 42(9):1205-1216. [12] BHATNAGAR N, NAYAK D, SINGH I, et al. Determination of machining-induced damage characteristics of fiber reinforced plastic composite laminates[J]. Materials and Manufacturing Processes, 2004, 19(6):1009-1023. [13] RAO G V G, MAHAJAN P, BHATNAGAR N. Micro-mechanical modeling of machining of FRP composites–Cutting force analysis[J]. Composites Science and Technology, 2007, 67(3):579-593. [14] CALZADA K A, KAPOOR S G, DEVOR R E, et al. Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites[J]. Journal of Manufacturing Processes, 2012, 14(2):141-149. [15] 殷俊伟, 贾振元, 王福吉,等. 基于CFRP切削过程仿真的面下损伤形成分析[J]. 机械工程学报, 2016, 52(17):58-64. YIN Junwei, JIA Zhenyuan, WANG Fuji, et al. FEM Simulation Analysis of Subsurface Damage Formation Based on Continuously Cutting Process of CFRP[J]. Journal of Mechanical Engineering, 2016, 52(17):58-64. [16] YASHIRO T, OGAWA T, SASAHARA H. Temperature measurement of cutting tool and machined surface layer in milling of CFRP[J]. International Journal of Machine Tools and Manufacture, 2013, 70:63-69. [17] BRINKSMEIER E, FANGMANN S, RENTSCH R. Drilling of composites and resulting surface integrity[J]. CIRP Annals-Manufacturing Technology, 2011, 60(1):57-60. [18] KIM H S, WANG Wenxue, TAKAO Y. Evaluation by FEM of temperature-dependent damage behavior in quasi-isotropic carbon/epoxy laminates[J]. Advanced Composite Materials, 1999, 8(3):247-257. [19] PECAT O, RENTSCH R, BRINKSMEIER E. Influence of milling process parameters on the surface integrity of CFRP[J]. Procedia CIRP, 2012(1):466-470. [20] 张厚江, 陈五一, 陈鼎昌. 碳纤维复合材料(CFRP)钻孔出口缺陷的研究[J]. 机械工程学报, 2004, 40(7):150-155. ZHANG Houjiang, CHEN Wuyi, CHEN Dingchang. Investigation of the exit defects in drilling carbon fiber-reinforced plastic plates[J]. Journal of Mechanical Engineering, 2004, 40(7):150-155. [21] 周正干, 孙广开, 李征, 等. 复合材料层压板钻孔分层激光超声检测方法[J]. 机械工程学报, 2013, 49(22):29-33. ZHOU Zhenggan, SUN Guangkai, LI Zheng, et al. Laser ultrasonic detection of drilling-induced delamination in composite laminates[J]. Journal of Mechanical Engineering, 2013, 49(22):29-33. [22] DAVIM J P, REIS P. Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments[J]. Journal of Materials Processing Technology, 2005, 160(2):160-167. [23] 王奔, 高航, 郭东明. 树脂固化温度与纤维铺设方式对C/E复合材料制孔质量的影响[J]. 机械工程学报, 2011, 47(12):19-25. WANG Ben, GAO Hang, GUO Dongming. Influence of resin cure temperature and fiber lay-up style on the drilling quality of C/E composites[J]. Journal of Mechanical Engineering, 2011, 47(12):19-25. [24] CONG Weilong, ZOU Xiaotian, DEINES T W, et al. Rotary ultrasonic machining of carbon fiber reinforced plastic composites: An experimental study on cutting temperature[J]. Journal of Reinforced Plastics and Composites, 2012, 31(22):1516-1525. [25] WANG Fuji, YIN Junwei, MA Jianwei, et al. Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in machining of unidirectional CFRP composite laminates[J]. The International Journal of Advanced Manufacturing Technology. 2017, 91(9):3107-3120. |