铝合金LB-VPPA复合焊接热源模型

doi:10.3901/JME.2016.12.046

摘要/Abstract

摘要： 激光-变极性等离子弧(Laser beam-variable polarity plasma arc,LB-VPPA)属双高能束新型复合焊接热源。采用Y4-S2型高速摄像检测了LB-VPPA复合焊接热源形态,在理论分析复合热源产热机理的基础上,利用Fortran语言对SYSWELD软件热源模型进行二次开发,建立能够实现正、反极性循环加载的LB-VPPA复合焊接热源模型。经与实际焊接熔池形状对比研究发现,熔池上部采用双椭球体热源,下部采用三维锥体热源,同时在小孔根部植入圆柱体热源的组合式热源模型与实际LB-VPPA复合焊接热源吻合。从模拟6 mm厚7A52铝合金板的VPPA焊和LB-VPPA复合焊接温度场分布结果发现,LB-VPPA复合焊能量更为集中,可以在平焊位置下实现穿孔型焊接。经实际焊接工艺试验验证了上述模拟结果的准确性。因此建立精确的LB-VPPA复合焊接热源模型对开展厚板铝合金LB-VPPA复合高效焊接提供强有力的理论支持。

关键词: 激光-变极性等离子弧复合焊, 热源模型, 数值模拟, 温度场

Abstract: Laser beam-variable polarity plasma arc(LB-VPPA) hybrid welding belongs to New type of welding heat source with double high energy beam. Arc shape of LB-VPPA hybrid welding is analyzed by Y4-S2 high-speed camera, Based on mechanism of the hybrid heat source, heat source model of LB-VPPA hybrid welding, which is developed secondarily by Fortran language in SYSWELD software, is set up to achieve positive and reverse polarity cycle loading. Compared with the actual welding molten pool shape, the hybrid heat source model is combinded by double ellipsoid heat source in the upper part of weld pool and 3-D conical heat source with cylindrical heat source at keyhole in the lower part, the results show that the combinded heat source model meets with the actual hybrid heat source. The VPPA welding and LB-VPPA hybrid welding temperature field of the 6mm thickness 7A52 aluminum alloy is simulated by SYSWELD, This demonstrated LB-VPPA hybrid welding has obvious advantage in energy concentration, so it can keyhole welding at the flat position. Accuracy of the numerical simulations are proved by the comparison of the actual welding experiment and the simulation results. Therefore, heat source model of LB-VPPA hybrid welding is established accurately, it can provide strongly support for LB-VPPA hybrid welding of thick aluminum alloy.

Key words: heat source model, laser beam-variable polarity plasma arc hybrid welding, numerical simulation, temperature field

中图分类号:

TG456

孙振邦, 韩永全, 张世全, 洪海涛. 铝合金LB-VPPA复合焊接热源模型[J]. 机械工程学报, 2016, 52(12): 46-51.

SUN Zhenbang, HAN Yongquan, ZHANG Shiquan, HONG Haitao. LB-VPPA Hybrid Welding Heat Source Model for Aluminum Alloy[J]. Journal of Mechanical Engineering, 2016, 52(12): 46-51.

参考文献

[1] NUNES A C,BAYLESS E O. Variable polarity plasma arc welding on space shuttle external tank[J]. Welding Journal,1984,63(4)：27-35.
[2] ZHANG S,PENG J G,SHI H. Ultrasonic inspection of spot welding quality[J]. Journal of HarBin Institute of Technology,2003,35(11)：1392-1398.
[3] PAGE C J,DEVE T,BIN J,et al. Plasma augmented laser welding and its applications[J]. Science and Technology of Welding and Joining,2002,7(1)：1-10.
[4] WANG Z,XUE M H,WEI Liao,et al. The effect of the welding direction on the plasma and metal transfer behavior of CO 2 laser+GMAW-P hybrid welding processes[J]. Optics and Lasers in Engineering,2014,58：102-108.
[5] VITEK J M,DAVID S A,RICHEY M W,et al. Welding pool shape prediction in Plasma augmented laser weld steel[J]. Science and Technology of Welding and Joining,2001,6(5)：305-314.
[6] 陈树君,蒋凡,张俊林,等. 铝合金变极性等离子弧穿孔横焊焊缝成形规律分析[J]. 焊接学报,2013,34(4)：1-6.
CHEN Shujun,JIANG Fan, ZHANG Junlin,et al. Principle of weld formation in variable polarity keyhole plasma arc transverse welding of aluminum alloy[J]. Transactions of the China Welding Institution,2013,34(4)：1-6.
[7] 胡庆贤,王艳辉,姚庆军,等. 基于 SYSWELD 的穿孔等离子弧焊接温度场有限元分析[J]. 焊接学报,2011,32(12)：66-69.
HU Qingxian,WANG Yanhui,YAO Qingjun,et al. Finite element analysis of temperature field during keyhole-plasma arc welding using SYSWELD software[J]. Transactions of the China Welding Institution,2011,32(12)：66-69.
[8] 韩永全,赵鹏,杜茂华,等. 铝合金变极性等离子弧焊温度场数值模拟[J]. 机械工程学报,2012,48(24)：33-37.
HAN Yongquan,ZHAO Peng,DU Maohua,et al. Numerical simulation of aluminum alloys variable polarity plasma arc welding temperature field[J]. Journal of Mechanical Engineering,2012,48(24)：33-37.
[9] 常保华,李志宁,周晶,等. 铝锂合金激光-等离子弧复合焊焊缝表面成形[J]. 清华大学学报,2010,50(8)：1178-1182.
CHANG Baohua,LI Zhining,ZHOU Jing,et al. Weld surface formation in laser plasma arc hybrid welding of an Al-Li alloy[J]. Journal of Tsinghua University,2010,50(8)：1178-1182.
[10] 李志宁,常保华,都东,等. 激光-等离子弧复合焊温度场的数值模拟[J]. 焊接学报,2011,28(6)：29-33.
LI Zhining,CHANG Baohua,DU Dong,et al. Numerical simulation on temperature field in laser-plasma arc hybrid we-lding[J]. Transactions of the China Welding Institution,2011,28(6)：29-33.
[11] 韩永全,殷树言,陈树君. 铝合金变极性等离子焊接电弧产热机理[J]. 焊接学报,2007,28(12)：35-37.
HAN Yongquan,YIN Shuyan,CHEN Shujun. Principle of produced heat by arc properties in VPPA of aluminum alloy[J]. Transactions of the China Welding Institution,2007,28(12)：35-37.
[12] 韩永全,庞世刚,姚青虎,等. 铝合金LB-VPPA复合焊接热源特性[J]. 焊接学报,2015,36(3)：23-26.
HAN Yongquan,PANG Shigang,YAO Qinghu,et al. Characteristic of LB-VPPA hybrid heat source for welding process of aluminum alloy[J]. Transactions of the China Welding Institution,2015,36(3)：23-26.

[1]	刘鑫, 张俊, 徐斌斌, 刘弘光, 赵万华. 激光辅助铣削过程的预热温度场调控方法研究[J]. 机械工程学报, 2024, 60(9): 218-228.
[2]	郑洋, 赵梓昊, 刘伟, 余政哲, 牛伟, 雷贻文, 孙荣禄. 高性能镁合金增材制造技术研究进展[J]. 机械工程学报, 2024, 60(7): 385-400.
[3]	胡龙, 刘红艳, 成慧梅, 陈维奇, 冯广杰, 叶延洪, 邓德安. 超高强耐磨钢NM500多层多道对接接头残余应力的研究[J]. 机械工程学报, 2024, 60(4): 335-344.
[4]	宋军, 唐倩, 罗智超, 冯琪翔, 聂云飞, 任治好. 马氏体时效钢激光选区熔化成形过程介观尺度数值模拟[J]. 机械工程学报, 2024, 60(3): 282-295.
[5]	彭文, 张丽, 李旭东, 刘军, 孙杰, 张殿华. 边部感应加热过程中的轧件热行为与温度均匀性研究[J]. 机械工程学报, 2024, 60(2): 119-131.
[6]	胡成亮, 苗宏量, 曾凡, 赵震, 汤敏俊, 汤晓峰. 热成形条件下软磁材料的磁感应强度预测模型[J]. 机械工程学报, 2024, 60(2): 132-139,149.
[7]	樊丁, 李德全, 侯英杰, 黄健康, 冯毅. GMAW潜弧焊电弧-熔池耦合行为数值分析[J]. 机械工程学报, 2024, 60(2): 159-167.
[8]	王刚, 谷诤巍, 于歌, 李欣. 热成形工艺条件下7075-H18铝合金板材塑性流动行为的本构建模[J]. 机械工程学报, 2024, 60(2): 188-196.
[9]	戴志远, 李田, 张卫华, 张继业. 不同海拔高度环境下高速列车气动特性研究[J]. 机械工程学报, 2024, 60(16): 291-305.
[10]	陈佳佳, 刘松炎, 杨勇, 袁冬冬, 张立勇, 傅玉灿, 钱宁. 纳米流体热管砂轮成型磨削钛合金换热性能评价[J]. 机械工程学报, 2024, 60(15): 407-419.
[11]	傅德彬, 李超艳, 陈四春, 徐晓明. 密闭空间内射流冲击波传递特性[J]. 机械工程学报, 2024, 60(14): 338-346.
[12]	童哲铭, 马鑫航. 基于孪生支持向量回归的多级离心泵外特性曲线预测及设计方法[J]. 机械工程学报, 2024, 60(14): 364-377.
[13]	田文卿, 蔡超, 郭瑞鹏, 史玉升. 热等静压近净成形数值模拟研究现状与展望[J]. 机械工程学报, 2024, 60(1): 13-26.
[14]	高转妮, 王磊磊, 李响, 刘志强, 吕飞阅, 黎一帆, 占小红. 7075铝合金激光熔丝增材制造热循环和温度梯度对熔池凝固组织的影响研究[J]. 机械工程学报, 2024, 60(1): 96-118.
[15]	于正洋, 钟斌, 张传伟, 赵升吨. 304不锈钢棒料连续旋弯低应力精密下料断裂预测[J]. 机械工程学报, 2024, 60(1): 190-197.