高速铣刀安全性跨尺度设计方法

doi:10.3901/JME.2016.05.202

摘要/Abstract

摘要： 高速、断续切削载荷作用下的铣刀,其内部不断积聚的能量会引起铣刀原子不可逆运动和宏观结构的改变,高速铣刀安全性具有跨尺度的关联特性。为了提高铣刀安全性,提出一种高速铣刀跨尺度设计方法。采用力连接的方法实现铣刀连续介质力学与分子动力学跨尺度关联,引入熵值法,定量描述铣刀介观安全性。构建铣刀安全性熵值模型,探究铣刀宏介观结构之间的关系,揭示铣刀宏介观安全性对铣刀直径、齿数、齿根结构、刀齿分布、刀片安装前角和铣刀原子群构型参数的响应特性。利用公理设计方法建立高速铣刀安全性跨尺度关联设计模型,并进行铣刀安全性试验验证。分析和试验结果表明,在铣刀高低熵值区内分别发生了属性和程度不同的原子不可逆运动,齿根结构和刀片安装前角对原子群构型具有显著性影响,利用高速铣刀跨尺度设计方法可以提高其安全性,从而为实现高速铣刀高效、可靠、稳定加工提供了保证。

关键词: 安全性, 高速铣刀, 公理设计, 跨尺度关联, 熵值

Abstract: Cutter is under the action of intermittent cutting load in high speed milling, the energy keeps cumulating in the interior of cutter and causes irreversible movement of atomic and the change of macrostructure. Safety of high speed milling cutter presents trans-scale correlation characteristics. In order to improve the safety of cutter, a trans-scale design method on safety of high speed milling cutter is proposed. Trans-scale correlation is achieved by using the method of force connection between continuum mechanics and molecular dynamics. Based on the entropy evaluation method, mesoscopic safety of cutter is quantified. Safety entropy model is proposed, and the model is used to explore relationship between macro and mesoscopic structures of cutter. The response characteristic of cutter safety to its design parameters is revealed, the parameters are diameter, number of teeth, tooth root structure, installation rake angle and configuration parameters of atomic group. The trans-scale correlation design model of high speed milling cutter safety is established by using axiomatic design method, the safety of cutter is verified. The results of analysis and experiment show that the irreversible movement of atomic with different features and degrees occurs separately in high and low entropy area. Tooth root structure and installation rake angle that can have a significant effect on atomic configuration. The safety of cutter is improved by using trans-scale design method, and the high efficiency, reliable and stable manufacturing is guaranteed.

Key words: axiomatic design, entropy, high speed milling cutter, safety, trans-scale correlation

中图分类号:

TG714

姜彬, 张明慧, 姚贵生, 白锦轩. 高速铣刀安全性跨尺度设计方法[J]. 机械工程学报, 2016, 52(5): 202-206.

JIANG Bin, ZHANG Minghui, YAO Guisheng, BAI Jinxuan. Trans-scale Design Method on Safety of High Speed Milling Cutter[J]. Journal of Mechanical Engineering, 2016, 52(5): 202-206.

参考文献

[1] TOH C K. Vibration analysis in high speed rough and finish milling hardened steel[J]. Journal of Sound and Vibration,2004,278(1-2)：101-115.
[2] BUDAK E. Analytical Models for high performance milling,Part II：Process dynamics and stability[J]. International Journal of Machine Tools and Manufacture,2006,46(12-13)：1489-1499.
[3] 姜彬,郑敏利,夏丹华. 高速铣刀安全可靠切削淬硬钢的检测方法：中国,201110420666.9[P]. 2014-12-10.
JIANG Bin,ZHENG Minli,XIA Danhua. Detection method on safety in high speed milling hardened steel：China,201110420666.9[P]. 2014-12-10.
[4] International Organization for Standardization. ISO/T 15641-2001(E) milling cutters for high speed machining-safety requirements[S]. Switzerland：ISO,2002.
[5] SHIKROT L E,MILLER R E,CURTIN W A. Multiscale plasticity modeling：Coupled atomistics and discrete dislocation mechanics[J]. Mech. Phys. Solids,2004,52(4)：755-787.
[6] TATAR K,GREN P. Measurement of milling tool vibrations during cutting using laser vibrometer[J]. International Journal of Machine Tools & Manufacture,2008,48(3)：380-387.
[7] 巩亚东,张金峰,张永震,等. 微尺度高速铣削表面质量的试验研究[J]. 机械工程学报,2013,49(13)：190-198.
GONG Yadong,ZHANG Jinfeng,ZHANG Yongzhen,et al. Experimental research on surface quality in the process of high-speed and micro-scale milling[J]. Journal of Mechanical Engineering,2013,49(13)：190-198.
[8] 陶辉锦,尹健. 材料设计中的结构层次理论及跨尺度关联问题[J]. 粉末冶金材料科学与工程,2007,12(5)：264-271.
TAO Huijin,YI Jian. Material design hierarchy theory and related issues across scales[J]. Materials Science and Engineering of Powder Metallurgy,2007,12(5)：264-271.
[9] EYNIAN,ALTINTAS Y. Analytical chatter stability of milling with rotating cutter dynamics at process damping speeds[J]. J. Manuf. Sci. Eng. Trans. ASME,2010,132(2)：21-24.
[10] 冯勇,汪木兰,王保升,等. 基于权重粒子群算法的工件铣削温度研究[J]. 机械工程学报,2014,50(19)：205-212.
FENG Yong,WANG Mulan,WANG Baosheng,et al. Research on cutting temperature of workpiece in milling process based on WPSO[J]. Journal of Mechanical Engineering,2014,50(19)：205-212.
[11] 白以龙,汪海英,夏蒙棼,等. 固体的统计细观力学—连接多个耦合的时空尺度[J]. 力学进展,2006,32(2)：286-305.
BAI Yilong,WANG Haiying,XIA Mengfen,et al. Solid statistical micromechanics-coupled connect multiple spatial and temporal scales[J]. Advances in Mechanics,2006,32(2)：286-305.
[12] CURTIN W A,MILLER R E. Atomistic/continuum coupling in computational materials science[J]. Modelling and Simulation in Materials Science and Engineering,2003,11(3)：33-36.
[13] YAHIATENE I,HENNING S,HUSER T. Optical fluctuation microscopy based on calculating local entropy values[J]. Chemical Physics Letters,2013,587：1-6.
[14] LEE K D,SUH N,OH J H. Axiomatic design of machine control system[J]. Annals of the CIRP,2001,50(1)：109-114.
[15] HELANDER M G,LI L. Axiomatic design in ergonomics and an extension of the information axiom[J]. Journal of Engineering Design,2002,13(4)：321-340.
[16] LIU Jianqin,LIU Mengmeng,GUO Wei,et al. Analysis of key problems in the structural performance evaluation for TBM cutter heads[J]. Modern Tunnelling Technology,2014,51(2)：5-10.

编辑推荐

Metrics

阅读次数

全文

224

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	0	0	0	224

来源	本网站	其他网站

次数	81	143
比例	36%	64%

摘要

485

最新录用	在线预览	正式出版

0	0	485

来源	本网站	其他网站

次数	446	39
比例	92%	8%