硬脆单晶材料塑性域去除机理研究进展

doi:10.3901/JME.2019.03.181

摘要/Abstract

摘要： 硬脆单晶材料具有高硬度、低密度、低热膨胀系数、化学稳定性好等特点，近年来在光学、航空航天、电子、固体激光器等领域应用广泛。这类材料由于高硬度、低断裂韧性等特点，加工过程容易产生脆性断裂，属于典型的难加工材料。硬脆单晶材料的塑性域加工技术成为超精密加工领域研究的热点问题，然而目前对硬脆单晶材料塑性域去除机理的研究尚处于探索阶段。介绍了硬脆单晶材料塑性域加工的概念，综述了硬脆单晶材料的塑性域去除机理，指出了目前硬脆单晶材料在塑性域去除机理研究方面存在的问题，并对硬脆单晶材料塑性域去除机理的未来研究方向进行了展望。

关键词: 非晶化, 纳米晶多晶化, 塑性域去除机理, 位错滑移, 物相转变, 硬脆单晶材料

Abstract: In recent years, hard-brittle single crystal materials are wildly used in optics, aerospace, electronics, solid-state laser and other fields due to their high hardness, low density, low thermal expansion coefficient, chemical stability and other characteristics. However, these materials are typical difficult-to-machine materials and brittle-fracture is easily induced in machining process due to their high hardness and low fracture toughness. The ductile-regime machining of hard-brittle single crystal materials has become a hot researching topic in the field of ultra-precision machining. However, the research on ductile removal mechanism of these materials is still in the exploratory stage. The concept of ductile removal for hard-brittle single crystal materials is introduced, the research progress of the ductile removal mechanism for hard-brittle single crystal materials is summarized, the existing problems in the research of ductile removal mechanism of hard-brittle single crystal materials is pointed out, and the future research direction of the ductile removal mechanism for hard-brittle single crystal materials is prospected.

Key words: amorphous, dislocation slip, ductile removal mechanism, hard-brittle single crystal materials, phase transformation, poly-crystalline nano-crystallites

中图分类号:

TG580

李琛, 张飞虎, 张宣, 饶小双. 硬脆单晶材料塑性域去除机理研究进展[J]. 机械工程学报, 2019, 55(3): 181-190.

LI Chen, ZHANG Feihu, ZHANG Xuan, RAO Xiaoshuang. Research Progress of Ductile Removal Mechanism for Hard-brittle Single Crystal Materials[J]. Journal of Mechanical Engineering, 2019, 55(3): 181-190.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: http://www.cjmenet.com.cn/CN/10.3901/JME.2019.03.181

http://www.cjmenet.com.cn/CN/Y2019/V55/I3/181

参考文献

[1] MENG B,ZhANG F,LI Z. Deformation and removal characteristics in nanoscratching of 6H-SiC with Berkovich indenter[J]. Materials Science in Semiconductor Processing,2015,31:160-165.
[2] DIEBOLD A,JIA Z,GRAUMANN I J,et al. High-power Yb:GGG thin-disk laser oscillator:First demonstration and power-scaling prospects[J]. Optics Express,2017,25(2):1452-1462.
[3] SHI Y,CHEN Q W,SHI J L. Processing and scintillation properties of Eu₃+ doped Lu₂O₃ transparent ceramics[J]. Optical Materials,2009,31(5):729-733.
[4] BASTAWROS A F,CHANDRA A,POOSARLA P A. Atmospheric pressure plasma enabled polishing of single crystal sapphire[J]. CIRP Annals,2015,64(1):515-518.
[5] NAKAGOMI S,MOMO T,TAKAHASHI S,et al. Deep ultraviolet photodiodes based on β-Ga2O3/SiC heterojunction[J]. Applied Physics Letters,2013,103(7):072105.
[6] CHENG J,GONG Y. Experimental study of surface generation and force modeling in micro-grinding of single crystal silicon considering crystallographic effects[J]. International Journal of Machine Tools and Manufacture,2014,77:1-15.
[7] MIYASHITA M. 1st annual precision engineering conference[J]. North Carolina State University,Raleigh,NC,USA,1985,7.
[8] KING R F,TABOR D. The strength properties and frictional behavior of brittle solids[C]//Proceedings of the Royal Society of London A:Mathematical,Physical and Engineering Sciences. The Royal Society,1954,223(1153):225-238.
[9] HUERTA M,MALKIN S. Grinding of glass:The mechanics of the process[J]. Journal of Engineering for Industry,1976,98(2):459-467.
[10] MOLLOY P,SCHINKER M G,DOLL W. Brittle fracture mechanisms in single point glass abrasion[C]//Hague International Symposium. International Society for Optics and Photonics,1987:81-88.
[11] CHANDRASEKAR S,SATHYANARAYANAN G. An investigation into the mechanics of diamond grinding of brittle materials[C]//15th North American Manufacturing Research Conference Proceedings. 1987,2:499-505.
[12] BIFANO T G,DOW T A,SCATTERGOOD R O. Ductile-regime grinding:A new technology for machining brittle materials[J]. Journal of engineering for industry,1991,113(2):184-189.
[13] BALL M J,MURPHY N A,SHORE P. Electrolytically assisted ductile-mode diamond grinding of BK7 and SF10 optical glasses[C]//Commercial Applications of Precision Manufacturing at the Sub-Micron Level. International Society for Optics and Photonics,1992,1573:30-39.
[14] ZHONG Z,VENKATESH V C. Generation of parabolic and toroidal surfaces on silicon and silicon-based compounds using diamond cup grinding wheels[J]. CIRP Annals-Manufacturing Technology,1994,43(1):323-326.
[15] CARLISLE K,SHORE P. Experiences in the development of ultra stiff CNC aspheric generating machine tools for ductile regime grinding of brittle materials[M]. Heidelberg:Springer,1991.
[16] NAMBA Y,ABE M,KOBAYASGI A. Ultraprecision grinding of optical glasses to produce super-smooth surfaces[J]. CIRP Annals-Manufacturing Technology,1993,42(1):417-420.
[17] LIU X,ZHANG B,DENG Z. Grinding of nanostructured ceramic coatings:Surface observations and material removal mechanisms[J]. International Journal of Machine Tools and Manufacture,2002,42(15):1665-1676.
[18] ZHANG B,ZHENG X L,TOKURA H,et al. Grinding induced damage in ceramics[J]. Journal of materials processing technology,2003,132(1-3):353-364.
[19] HOCKEY B J. Plastic deformation of aluminum oxide by indentation and abrasion[J]. Journal of the American Ceramic Society,1971,54(5):223-231.
[20] HUANG L,BONIFACIO C,SONG D,et al. Investigation into the microstructure evolution caused by nanoscratch-induced room temperature deformation in M-plane sapphire[J]. Acta Materialia,2011,59(13):5181-5193.
[21] TAYLOR C R,STACH E A,SALAMO G,et al. Nanoscale dislocation patterning by ultralow load indentation[J]. Applied Physics Letters,2005,87(7):073108.
[22] OLIVER D J,BRADBY J E,WILLIAMS J S,et al. Thickness-dependent phase transformation in nanoindented germanium thin films[J]. Nanotechnology,2008,19(47):475709.
[23] WASMER K,GASSILLOUD R,MICHLER J,et al. Analysis of onset of dislocation nucleation during nanoindentation and nanoscratching of InP[J]. Journal of Materials Research,2012,27(1):320-329.
[24] GUO J,REDDY K,HIRATA A,et al. Sample size induced brittle-to-ductile transition of single-crystal aluminum nitride[J]. Acta Materialia,2015,88:252-259.
[25] GUO X,GUO Q,LI Z,et al. Size and crystallographic orientation effects on the mechanical behavior of 4h-sic micro-/nano-pillars[J]. Metallurgical and Materials Transactions A,2018,49(2):439-445.
[26] CHANG L,ZHANG L. Deformation mechanisms at pop-out in monocrystalline silicon under nanoindentation[J]. Acta Materialia,2009,57(7):2148-2153.
[27] CHANG L,ZHANG L. Mechanical behaviour characterisation of silicon and effect of loading rate on pop-in:A nanoindentation study under ultra-low loads[J]. Materials Science and Engineering:A,2009,506(1-2):125-129.
[28] WU Y Q,HUANG H,ZOU J,et al. Nanoscratch-induced phase transformation of monocrystalline Si[J]. Scripta Materialia,2010,63(8):847-850.
[29] WANG Y,ZOU J,HUANG H,et al. Formation mechanism of nanocrystalline high-pressure phases in silicon during nanogrinding[J]. Nanotechnology,2007,18(46):465705.
[30] YAN J. Laser micro-Raman spectroscopy of single-point diamond machined silicon substrates[J]. Journal of Applied Physics,2004,95(4):2094-2101.
[31] YAN J,ZHNAG Z,KURIYAGAWA T. Mechanism for material removal in diamond turning of reaction-bonded silicon carbide[J]. International Journal of Machine Tools and Manufacture,2009,49(5):366-374.
[32] MORRIS J C,CALLAHAN D L,KULIK J,et al. Origins of the ductile regime in single-point diamond turning of semiconductors[J]. Journal of the American Ceramic Society,1995,78(8):2015-2020.
[33] HUANG H,YAN J. New insights into phase transformations in single crystal silicon by controlled cyclic nanoindentation[J]. Scripta Materialia,2015,102:35-38.
[34] HUANG H,YAN J. Volumetric and timescale analysis of phase transformation in single-crystal silicon during nanoindentation[J]. Applied Physics A,2016,122(6):607.
[35] HUANG H,YAN J. Possibility for rapid generation of high-pressure phases in single-crystal silicon by fast nanoindentation[J]. Semiconductor Science and Technology,2015,30(11):115001.
[36] HUANG H,YAN J. In situ characterization of formation and growth of high-pressure phases in single-crystal silicon during nanoindentation[J]. Applied Physics A,2016,122(4):409.
[37] WU H,MELKOTE S N. Effect of crystallographic orientation on ductile scribing of crystalline silicon:Role of phase transformation and slip[J]. Materials Science and Engineering:A,2012,549:200-205.
[38] GOGOTSI Y,ZHOU G,KU S S,et al. Raman microspectroscopy analysis of pressure-induced metallization in scratching of silicon[J]. Semiconductor Science and Technology,2001,16(5):345.
[39] GOGOTSI Y,BAEK C,KIRSCHT F. Raman microspectroscopy study of processing-induced phase transformations and residual stress in silicon[J]. Semiconductor Science and Technology,1999,14(10):936.
[40] KOVALCHENKO A,GOGOTSI Y,DOMNICH V,et al. Phase transformations in silicon under dry and lubricated sliding[J]. Tribology Transactions,2002,45(3):372-380.
[41] MATSUMOTO M,HUANG H,HARADA H,et al. On the phase transformation of single-crystal 4H-SiC during nanoindentation[J]. Journal of Physics D:Applied Physics,2017,25(26):265303.
[42] PATTEN J,FESPERMAN R,KUMAR S,et al. High-pressure phase transformation of silicon nitride[J]. Applied Physics Letters,2003,83(23):4740-4742.
[43] CHROBAK D,NORDLUND K,NOWAK R. Nondislocation origin of GaAs nanoindentation pop-in event[J]. Physical Review Letters,2007,98(4):045502.
[44] NOWAK R,CHROBAK D,NAGAO S,et al. An electric current spike linked to nanoscale plasticity[J]. Nature Nanotechnology,2009,4(5):287-291.
[45] ZHANG Z,HUO Y,GUO D. A model for nanogrinding based on direct evidence of ground chips of silicon wafers[J]. Science China Technological Sciences,2013,56(9):2099-2108.
[46] ZHANG Z,WANG B,KANG R,et al. Changes in surface layer of silicon wafers from diamond scratching[J]. CIRP Annals-Manufacturing Technology,2015,64(1):349-352.
[47] ZHANG Z,DU Y,WANG B,et al. Nanoscale wear layers on silicon wafers induced by mechanical chemical grinding[J]. Tribology Letters,2017,65(4):132.
[48] FANG F,WU H,ZHOU W,et al. A study on mechanism of nano-cutting single crystal silicon[J]. Journal of Materials Processing Technology,2007,184(1-3):407-410.
[49] ZHANG Q,FU Y,SU H,et al. Surface damage mechanism of monocrystalline silicon during single point diamond grinding[J]. Wear,2018,396:48-55.
[50] MENG B,ZHANG Y,ZHANG F. Material removal mechanism of 6H-SiC studied by nano-scratching with Berkovich indenter[J]. Applied Physics A,2016,122(3):247.
[51] WU Y Q,HUANG H,ZOU J. Lattice bending in monocrystalline GaAs induced by nanoscratching[J]. Materials Letters,2012,80:187-190.
[52] LI C,ZHANG F,MENG B,et al. Research of material removal and deformation mechanism for single crystal GGG (Gd₃Ga₅O₁₂) based on varied-depth nanoscratch testing[J]. Materials & Design,2017,125:180-188.
[53] LI C,ZHANG F,WANG X,et al. Investigation on surface/subsurface deformation mechanism and mechanical properties of GGG single crystal induced by nanoindentation[J]. Applied Optics,2018,57(14):3661-3668.
[54] GAO S,WU Y,KANG R,et al. Nanogrinding induced surface and deformation mechanism of single crystal β-Ga2O3[J]. Materials Science in Semiconductor Processing,2018,79:165-170.
[55] KHAN A S,LIU J A. deformation mechanism based crystal plasticity model of ultrafine-grained/nanocrystalline FCC polycrystals[J]. International Journal of Plasticity,2016,86:56-69.
[56] PANZARINO J F,PAN Z,RUPERT T J. Plasticity-induced restructuring of a nanocrystalline grain boundary network[J]. Acta Materialia,2016,120:1-13.
[57] KUMAR K S,VAN H,SURESH S. Mechanical behavior of nanocrystalline metals and alloys1[J]. Acta Materialia,2003,51(19):5743-5774.
[58] MEYERS M A,MISHRA A,BENSON D J. Mechanical properties of nanocrystalline materials[J]. Progress in Materials Science,2006,51(4):427-556.
[59] ZHAO Y,TOTH L S,MASSION R,et al. Role of grain boundary sliding in texture evolution for nanoplasticity[J]. Advanced Engineering Materials,2018,20:1700212.
[60] CAHN J W,TAYLOR J E. A unified approach to motion of grain boundaries,relative tangential translation along grain boundaries,and grain rotation[J]. Acta Materialia,2004,52(16):4887-4898.
[61] WANG L,XIN T,KONG D,et al. In situ observation of stress induced grain boundary migration in nanocrystalline gold[J]. Scripta Materialia,2017,134:95-99.
[62] FARKAS D,FRØSETH A,VAN S H. Grain boundary migration during room temperature deformation of nanocrystalline Ni[J]. Scripta Materialia,2006,55(8):695-698.
[63] LIU P,MAO S C,WANG L H,et al. Direct dynamic atomic mechanisms of strain-induced grain rotation in nanocrystalline,textured,columnar-structured thin gold films[J]. Scripta Materialia,2011,64(4):343-346.
[64] WANG L,TENG J,LIU P,et al. Grain rotation mediated by grain boundary dislocations in nanocrystalline platinum[J]. Nature Communications,2014,5:4402.
[65] MARGULIES L,WINTHER G,POULSEN H F. In situ measurement of grain rotation during deformation of polycrystals[J]. Science,2001,291(5512):2392-2394.
[66] HASLAM A J,PHILLPOT S R,WOLF D,et al. Mechanisms of grain growth in nanocrystalline fcc metals by molecular-dynamics simulation[J]. Materials Science and Engineering:A,2001,318(1-2):293-312.
[67] OLMSTED D L,FOILES S M,HOLM E A. Survey of computed grain boundary properties in face-centered cubic metals:I. Grain boundary energy[J]. Acta Materialia,2009,57(13):3694-3703.
[68] CHEONG W C D,ZHANG L C. Molecular dynamics simulation of phase transformations in silicon monocrystals due to nano-indentation[J]. Nanotechnology,2000,11(3):173.
[69] MYLVAGANAM K,ZHANG L C. Nanotwinning in monocrystalline silicon upon nanoscratching[J]. Scripta Materialia,2011,65(3):214-216.
[70] GOEL S,KOVALCHENKO A,STUKOWSKI A,et al. Influence of microstructure on the cutting behaviour of silicon[J]. Acta Materialia,2016,105:464-478.
[71] GOEL S,LUO X,AGRAWAL A,et al. Diamond machining of silicon:A review of advances in molecular dynamics simulation[J]. International Journal of Machine Tools and Manufacture,2015,88:131-164.
[72] GOEL S,LUO X,REUBEN R L. Molecular dynamics simulation model for the quantitative assessment of tool wear during single point diamond turning of cubic silicon carbide[J]. Computational Materials Science,2012,51(1):402-408.
[73] LUO X,GOEL S,REUBEN R L. A quantitative assessment of nanometric machinability of major polytypes of single crystal silicon carbide[J]. Journal of the European Ceramic Society,2012,32(12):3423-3434.
[74] GOEL S,STUKOWSKI A,LUO X,et al. Anisotropy of single-crystal 3C-SiC during nanometric cutting[J]. Modelling and Simulation in Materials Science and Engineering,2013,21(6):065004.
[75] MISHRA M,SZLUFARSKA I. Possibility of high-pressure transformation during nanoindentation of SiC[J]. Acta Materialia,2009,57(20):6156-6165.
[76] CHAYOSHI S Z,LUO X. Molecular dynamics simulation study of deformation mechanisms in 3C-SiC during nanometric cutting at elevated temperatures[J]. Materials Science and Engineering:A,2016,654:400-417.
[77] XIAO G,TO S,ZHANG G. The mechanism of ductile deformation in ductile regime machining of 6H SiC[J]. Computational Materials Science,2015,98:178-188.