Journal of Mechanical Engineering

2017, Volume 53 Issue 9 Publication:05 May 2017
Previous Issue Next Issue
Application Progress of Ionic Polymer-metal Composites Actuator in Robots
GUO Chuangqiang, WU Chunya, LIU Hong
机械工程学报. 2017, 53 (9): 1-13. doi: 10.3901/JME.2017.09.001
Abstract ( 907 )    PDF(3357KB) ( 810 )
Related Articles | Metrics
Lateral Force Model of Lunar Roving Vehicle’s
Wheel Based on Pressure Modifying
LIANG Zhongchao, WANG Yongfu, GAO Haibo, DENG Zongquan
机械工程学报. 2017, 53 (9): 14-21. doi: 10.3901/JME.2017.09.014
Abstract ( 595 )    PDF(3418KB) ( 370 )
Related Articles | Metrics
Design and Sea Trials of the Underwater Glider for Micro-structure Turbulence Measurement
MA Wei, WANG Yanhui, XU Tianyu
机械工程学报. 2017, 53 (9): 22-29. doi: 10.3901/JME.2017.09.022
Abstract ( 588 )    PDF(2218KB) ( 535 )
Related Articles | Metrics
Novel High Stiffness Redundant Parallel Mechanism with Closed-loop Units
ZHAO Fuqun, GUO Sheng, QU Haibo
机械工程学报. 2017, 53 (9): 30-37. doi: 10.3901/JME.2017.09.030
Abstract ( 718 )    PDF(2121KB) ( 338 )
Related Articles | Metrics
Human-robot Interaction-based Coordination Control for Hip Joints Motion Assist in Walking
ZHANG Xia, LUO Tianhong, CHEN Renxiang, CHEN Lili
机械工程学报. 2017, 53 (9): 38-45. doi: 10.3901/JME.2017.09.038
Abstract ( 544 )    PDF(1026KB) ( 482 )
Related Articles | Metrics
Optimization of Circular-axis Flexure Hinge by Considering Material Selection and Geometrical Configuration Simultaneously
CAO Yuyan, WANG Zhichen, ZHOU Chao, WANG Wenpan
机械工程学报. 2017, 53 (9): 46-57. doi: 10.3901/JME.2017.09.046
Abstract ( 596 )    PDF(2530KB) ( 331 )
Related Articles | Metrics
Dynamic Skidding Behavior of Skew Cylindrical Roller Bearings under Time-variable Loads
HAN Qinkai, LI Xinglin, YAN Guobin, CHU Fulei
机械工程学报. 2017, 53 (9): 58-65. doi: 10.3901/JME.2017.09.058
Abstract ( 748 )    PDF(1943KB) ( 392 )
Related Articles | Metrics
Vibration Suppression and Absorption Using Permanent Magnet
Stiffness Varying Mechanism
YAO Hongliang, WANG Chongyang, CHEN Zidong, WEN Bangchun
机械工程学报. 2017, 53 (9): 66-72. doi: 10.3901/JME.2017.09.066
Abstract ( 661 )    PDF(2095KB) ( 272 )
Related Articles | Metrics
Theoretical Model for the Contact Stiffness and Damping of Mechanical Joint Surface
FU Weiping, LOU Leiting, GAO Zhiqiang, WANG Wen, WU Jiebei
机械工程学报. 2017, 53 (9): 73-82. doi: 10.3901/JME.2017.09.073
Abstract ( 805 )    PDF(970KB) ( 693 )
Related Articles | Metrics
Bearing Fault Diagnosis Based on Fault Characteristic Trend Template
LIU Dongdong, CHENG Weidong, WAN Guangtong
机械工程学报. 2017, 53 (9): 83-91. doi: 10.3901/JME.2017.09.083
Abstract ( 964 )    PDF(599KB) ( 464 )
Related Articles | Metrics
Fault Identification Method Based on Graph-implanted Probability-based Semi-supervised Discriminant Analysis
LI Feng, TANG Baoping, WANG Jiaxu, LIN Jianhui
机械工程学报. 2017, 53 (9): 92-100. doi: 10.3901/JME.2017.09.092
Abstract ( 606 )    PDF(555KB) ( 278 )
Related Articles | Metrics
Damage Identification and Fatigue Residual Life Prediction of Vibrating Screen Beam Based on Strain Modal Analysis
ZHANG Zerong, FAN Zhimin, WANG Yongyan
机械工程学报. 2017, 53 (9): 101-107. doi: 10.3901/JME.2017.09.101
Abstract ( 645 )    PDF(792KB) ( 439 )
Related Articles | Metrics
An Active Design Method for CNC Machine Structure Parameters and it`s Interval Variation Considering Natural Frequency
WANG Lei, YANG Lei, ZHAO Wanhua, LU Bingheng
机械工程学报. 2017, 53 (9): 108-115. doi: 10.3901/JME.2017.09.108
Abstract ( 497 )    PDF(583KB) ( 525 )
Related Articles | Metrics
Detecting Symmetries in Mechanical Assembly Model
HUA Shungang, LI Xiandang, BAI Maodong
机械工程学报. 2017, 53 (9): 116-126. doi: 10.3901/JME.2017.09.116
Abstract ( 538 )    PDF(8169KB) ( 296 )
Related Articles | Metrics
The Disassembly Model and Its Analysis of PCB by Vibration
XIANG Dong, WU Yujia, YANG Jiping, LONG Danfeng, MOU Peng
机械工程学报. 2017, 53 (9): 127-134. doi: 10.3901/JME.2017.09.127
Abstract ( 533 )    PDF(383KB) ( 245 )
Related Articles | Metrics
Aerodynamic Drag Reduction of Vehicle Based on Free Form Deformation
WANG Yiping, WANG Tao, LI Shuai
机械工程学报. 2017, 53 (9): 135-143. doi: 10.3901/JME.2017.09.135
Abstract ( 658 )    PDF(2503KB) ( 497 )
Related Articles | Metrics
Three Dimensional Space-wiring Technology for Cable Harness Based on Multi-scale Chaotic Mutation Particle Swarm Optimization Algorithm
WANG Falin, LIAO Wenhe, GUO Yu, WANG Xiaofei
机械工程学报. 2017, 53 (9): 144-156. doi: 10.3901/JME.2017.09.144
Abstract ( 968 )    PDF(4200KB) ( 350 )
Related Articles | Metrics
The Geometry Theorem and Application of Degree of Freedom Analysis of Workpiece Based on Location Normal
WANG Xiaohui, WU Dongzu, LAN Guosheng, WANG Youli
机械工程学报. 2017, 53 (9): 157-163. doi: 10.3901/JME.2017.09.157
Abstract ( 640 )    PDF(1670KB) ( 424 )
Related Articles | Metrics
Online Compensation of Full-stroke Thermal Error for Dual Direct Feed Axis with Hybrid KPLS and Fuzzy Logic Method
LIN Xiankun, FAN Zhenhua, WANG Yihan, ASKHAT
机械工程学报. 2017, 53 (9): 164-169. doi: 10.3901/JME.2017.09.164
Abstract ( 625 )    PDF(1257KB) ( 431 )
Related Articles | Metrics
Review on Brittle Material Subsurface Damage Detection Technology
WANG Ningchang, JIANG Feng, HUANG Hui, XU Xipeng
机械工程学报. 2017, 53 (9): 170-179. doi: 10.3901/JME.2017.09.170
Abstract ( 685 )    PDF(502KB) ( 434 )
Related Articles | Metrics
3D Printing Process for Hydro Gel with the Three-dimensional Micro Tubes to Mimic Vascular Network
MAO Wei, LIAN Qin, LI Dichen, JIA Shuhai
机械工程学报. 2017, 53 (9): 180-186. doi: 10.3901/JME.2017.09.180
Abstract ( 775 )    PDF(1790KB) ( 538 )
Related Articles | Metrics
Reaserch on Mechanism and Experimental of Chip Breaking during High Pressure Cooling Turning of Superalloys with PCBN Tool
WU Mingyang, ZHAO Xu, CHEN Yong, XU Ming, CHENG Yaonan, LI Lubin
机械工程学报. 2017, 53 (9): 187-192. doi: 10.3901/JME.2017.09.187
Abstract ( 681 )    PDF(2692KB) ( 352 )
Related Articles | Metrics
Shear-thickening Polishing of Si₃N₄ Ceramics
LI Min, YUAN Julong, Lü Binghai, ZHAO Ping, ZHONG Meipeng
机械工程学报. 2017, 53 (9): 193-200. doi: 10.3901/JME.2017.09.193
Abstract ( 824 )    PDF(3492KB) ( 429 )
Related Articles | Metrics
Mathematical Modeling of Aeronautical Monolithic Component Machining Distortion Based on Stiffness and Residual Stress Evolvement
HUANG Xiaoming, SUN Jie, LI Jianfeng
机械工程学报. 2017, 53 (9): 201-208. doi: 10.3901/JME.2017.09.201
Abstract ( 762 )    PDF(721KB) ( 346 )
Related Articles | Metrics
Influence on Powders and Process Parameters on Bonding Shear Strength in Laser Cladding
XU Mingsan, LI Jianfeng, LEE Hwateng, SUN Jie, LI Fangyi, ZHAO Yanhua
机械工程学报. 2017, 53 (9): 209-. doi: 10.3901/JME.2017.09.209
Abstract ( 1048 )    PDF(11297KB) ( 466 )
Related Articles | Metrics